并运用有限元法对该条件的正确性进行了验证。
The correctness of these postulated conditions has been verified by finite elements.
文中运用有限元法对三种不同入口收缩角的喷嘴进行了分析。
This paper is focused on the analysis of three nozzles with different entrance shrinking Angle with FEM method.
运用有限元法对不同工况下平面薄膜反射镜的变形进行了计算。
By using finite element method, the deformations of flat membrane mirror have been calculated.
运用有限元法分析了不同入口锥角的陶瓷喷砂嘴冲蚀过程中的应力状态。
The stress states of the ceramic nozzles with different entrance angle in the sand blasting process are analyzed with finite element method .
为验证等效梁法的可靠性，运用有限元法对框架式地道桥的动力特性进行了分析。
To test and verify the reliability of equivalent beam method, finite element method is applied to the analysis on dynamic characteristic of frame style subway bridge.
运用有限元法对自动武器零部件进行拓扑优化设计是一种自动武器减重设计的有效方法。
By use of FEA method, the results showed that topological optimization design of components in automatic weapons is an effective method to reduce the weight.
本文运用有限元法的基本思路，提出了采动坡体稳定性的计算方法，并给出了实例计算。
This paper applies the general theory of finite element method, and proposes a computing method of mining landside stability and give a computing example.
本论文针对实际样机产品设计，着重运用有限元法对长螺杆的布置及其连接可靠性进行了分析。
Aiming at the real prototype, we use the finite element method to analysis the effect of disposition of the long bolts and check its reliability.
在考虑了温度、相变及应力的耦合作用的基础上，运用有限元法分析了车轮热处理过程的变形。
Deformation in railway wheel for heat treatment was analyzed with finite element method, in which the coupling of temperature, phase transformation and stress was considered.
运用有限元法和优化设计理论，建立机床主轴结构设计的优化数学模型，选择优化方法，进行了实例计算。
By applying finite element method and optimal design theory this paper carried out an optimal design model of the machine tool shaft, chosen optimal methods and given a living example.
运用有限元法和疲劳分析fe - SAFE软件对某型柴油机排烟管由于振动引起的疲劳断裂原因进行了研究。
It was studied that the reason of fatigue-broken of the exhaust manifold resulted from vibration in a diesel engine using FEA and FE-SAFE software.
以梁单元为模型，运用有限元法研究织物的悬垂性问题。建立了织物的模型进行理论分析，并进行了悬垂度仿真。
The cloth draping property is studied by using finite element method. The model of cloth is set up and analyzed in terms of theory. Meanwhile, the simulate of cloth draping property is completed.
目的：旨在强调运用有限元法对脊柱解剖，脊柱疾病，脊柱相关手术，以及脊柱的有限元模型的建立进行简要的阐述。
OBJECTIVE: This article aims to emphasize by using the finite element method to spine disease, spine anatomical, related operation, and spinal finite element model of the brief elaboration.
文章考虑了隔水管所受的三维载荷，运用有限元法，采用三维动力学模型对深水钻井隔水管的动力特性进行了计算分析。
Considering the 3-d loads borne by the Marine riser, and using finite element method, the article analyzes the dynamics characteristics of the deep Marine riser with the 3-d dynamics model.
运用弹塑性有限元法结合实验研究了连续和间隙连接的单搭接接头应力分布规律，并考虑了胶瘤的影响。
The stress distribution of continuous and recessed bonding single-lap joints is discussed with use of elastoplastic finite element method (FEM) and experiment, considering the effect of fillet.
运用弹塑性有限元法，研究了胶粘剂弹性模量对含间隙的铝合金单搭接接头上应力分布的影响。
The effect of elastic modulus of adhesive on the str ess distribution in aluminium alloy single lap joint was investigated using elastic-plastic finite element method(FEM).
运用随机有限元法，对单向纤维复合材料组成的层合板结构进行了可靠性分析。
The stochastic finite element method is used to analyze the composite structural reliability. Here the laminate structure is made of unidirectional fiber composites.
运用体积开裂概率分析了大体积混凝土结构的抗裂可靠性，并结合有限元法对控制裂缝设计与施工进行了研究。
The paper analyses the anti cracking reliability in massive concrete structure with the concept of overall crack probability, presenting the cracking control design and construction combined with FEM.
再次，运用二维轴对称有限元法以及三维有限元法，系统分析了挤扩支盘桩单桩和群桩的承载变形性状。
Thirdly, the bearing and deformation characteristics of single and group piles are investigated by means of axisymmetric finite element analysis (FEA) and three-dimensional FEA.
针对结构体系可靠性分析的困难和复杂，运用蒙特卡洛有限元法，提出一种分析空间框架结构体系的可靠性方法。
According to the difficulty and complexity of the analysis on structural system reliability, an effective method to calculate space frame structure with Monte Carlo method was proposed.
基于金属板材塑性变形的损伤本构关系，运用有限元数值法分析了金属薄板的面内成形过程。
The sheet metal forming processes under in-plane deformation were simulated by using finite element method based on a coupled elastoplasticity with damage constitutive laws.
本文运用ANSYS分析软件，利用物理环境分析法建立了三层套组合式扁挤压筒内压-预紧-热载荷耦合有限元模型。
With the FEA software ANSYS, the coupling model of coupling the pressure-prestress-heat stress flat container of three-layer is built using the physical environment approach.
首先，运用了赫兹公式和有限元法对外形规则、接触状态简单的零件进行接触应力和接触变形计算。
First contact stress and deformation of parts which have normal shapes and simple contacting status are calculated using Hertz formula and finite element method.
将自选参数动力松弛法在工程实例中建模运用，并与非线性有限元找形方法的结果比较。
Establishing a practical construction model by using the automatic choice parameter dynamic relaxation, Then comparing the result with the result by using nonlinear finite element.
介绍有限元等效应力法在拱坝设计中的运用实例。
An example of the finite element equivalent stress method in engineering design practice is described.
本文运用ANSYS软件，采用死活单元法对离子喷涂的涂层热应力进行了有限元计算，并进行了定性的分析。
The thermal stress during spraying is simulated and analyzed by element birth and death method with ANSYS software.
运用简单离散方法对该转子轴承系统进行了分析，其结果与有限元法偏差较大。
The rotor bearing system was analyzed by using a simple discrete method. The results of the analysis are quite different from those obtained under the finite element analysis method.
通过运用极限平衡法和有限元法计算分析，边坡体可能产生蠕滑失稳，须进行加固治理。
The result of calculating of the landslide mass's stability with the method of limit and limit element method elicits the possibility of creeping slip and the need to reinforce it.
通过运用极限平衡法和有限元法计算分析，边坡体可能产生蠕滑失稳，须进行加固治理。
The result of calculating of the landslide mass's stability with the method of limit and limit element method elicits the possibility of creeping slip and the need to reinforce it.
应用推荐