带输出电源控制，可控其它设备。
控制电压和由恒流电源输出的电流之间的关系改变可能会产生漂移。
The relationship between the control voltage and the current output by the constant-current source may shift.
数字控制器可以控制使用一个本地温度，其输出可以是任何行业标准相匹配的电源控制器的用户可配置的模拟输入。
Digital controller can be used with a local temperature controller, the output of which can be any industry standard matched to the power controller's user-configurable analog input.
在设计中，以TL 494作为PWM产生电路输出控制信号，控制开关管的导通状况，在半桥反激式输出的基础上实现了电源的多路输出。
In the design, to produce circuit TL494 as a PWM output control signals, control of the on-switch situation, the half-bridge flyback output on the basis of the power of multi-output.
实验结果表明：采用了本文设计的数字化控制技术的逆变电源，可以获得稳定的正弦电压输出。
It is shown by the experimental results that the inverter power supply with digital control technologies designed by this dissertation can output steady sine voltage.
弧焊电源的输出动态特性的研究，对优化焊机性能、焊接过程控制和改善工艺效果有重要意义。
Study of the dynamic output characteristics of arc welding power supply is of great significance for optimization of welder design, control of welding process and improvement of welding quality.
图中的020线是用来控制到输出系统的电源。
Line 020 of the diagram is used to control power to the outputs of the system.
设计分电源，AD和DA转换，电流源输出，显示和控制模块。
The design includes power source, AD and DA conversion, output module of current-source, demonstration and control module.
模拟部分主要包括电源、功率控制、信号产生、信号调制、高压输出控制和反馈控制电路。
The analog part mainly includes power source, power control, signal generation, signal modulation, high voltage output control and feedback control circuit.
由于直流供电电源纹波的影响，电压控制SPWM逆变电路的输出谐波分量幅值较大。
Because of the ripple of the DC power supply, the output harmonic amplitude of the voltage controlled SPWM inverter is higher.
基于电流和电压的双环控制策略，研制了一台输出功率300w的功率因数校正电源样机。
A 300w experimental prototype of power supply with power-factor-correction function based on dual-loop control strategy is presented in this paper.
AT 89s52作为显示模块的控制核心，实现功率放大器输出功率、直流电源的供给功率和整机效率功能的显示。
AT89S52 as a display module to control the core of achieving power amplifier output power, DC power supply of power and machine efficiency, for display.
提出了全功能弧焊电源控制电路的各类设计方案，分析了它们的特点；并提出了一种电源控制系统的电路设计方案；分析其基本工作原理和获得的各类电源输出外特性。
The ideas of constructing of the control circuit of full-function controlled power source for arc welding are suggested in this paper, with their features analyzed.
为了克服逆变电源因带整流性负载而引起的输出电压波形周期性畸变，本文选取重复控制技术为研究对象。
Most research is concentrated on repetitive control technique in this paper for the sake of overcoming the repetitive distortion when inverter induced by rectifier-type nonlinear loads.
工作系统全部自动控制，接通水源、电源5分钟左右即可连续不断的输出蒸汽，工作效率极高。
Working system is all automatically controlled. After connecting the water supply and power supple for 5 minutes or so, it can output the steam continuously with high working efficiency.
电子线路输出部分控制车辆的用电总电源、喇叭回路及刹车系统。
The output part of the electronic circuit controls a main electric power source, an acoustic horn loop and a brake system.
介绍了SPWM逆变电源输出电压波形重复控制的工作原理及重复控制器的设计方法。
The operation principle of repetitive control of output voltage of SPWM inverter and design method of repetitive controller are introduced.
数据采集卡采集程控电源的输出以实现对程控电源的闭环控制，采集发电机控制器和汇流条功率控制器的保护信号以计算延时时间。
Data acquisition card collects data about the power output to realize a close-loop control, and protection signal of the two controllers to compute the delay time.
在燃料电池发动机和镍氢电池组组成的混合动力系统中，提出了通过一个双向电源变换器实现双电源输出功率混合的控制方法。
For hybrid power system composed of a fuel cell engine and a group of Ni-H batteries, a new control method with a bi-directional power converter is proposed.
针对这种情况，提出了一种双闭环控制结构和模糊控制方法，使得负载变化时保持感应加热电源的输出功率稳定。
To solve the problem, in this paper we put forward a double closed-loop control configuration and a fuzzy control method to ensure the steady output power when the load changes.
本文提出一种新的非线性控制方法，使得PWM开关变换器的输出电压，在负载干扰和电源电压干扰下，具有优良的动态特性。
Under this control strategy, the PWM converter output voltage characteristics is improved if load current vary and line voltage vary.
本文论述的是基于重复控制技术的单相电压型正弦逆变电源，重点是实现输出电压的高正弦度。
This paper studies a single phase voltage SPWM inverter based on repetitive control, whose key point is achieving a good sinusoidal output wave.
弧焊逆变电源输出电流控制是满足不同焊接工艺需求和保证电源可靠运行的关键。
The welding current control for inverter source is the key that meets requirements of varied welding processes and ensures the operation stability and reliability.
根据KA3525的应用特点，设计了一种基于该电流型PWM控制芯片和单片机控制实现输出电压可调的稳压电源电路。
According to the applied characteristics of the KA3525, a regulated power supply circuit based on a PWM controlled chip and controlled by single-chip processor was designed.
本文利用频率跟踪和移相控制技术，使电源输出频率跟踪负载谐振频率变化，以保证最佳加热效率。
It could ensure the best efficiency by making the output frequency to trace the resonance frequency with the frequency tracing technique and phase-shifted control.
业界之发展趋势是要求更低的输出电压、更大的功率、更有效控制电源、以及对负载电流的转变有更快速的反应。
Industry trends lean toward lower output voltages, more power, tighter power regulation, and faster response to changes in load current.
采用基于误差优先判断的PID控制方式来控制斩波器输出电压，从而实现电源输出功率的控制；
Second, the management of power output power can be carried out by PID control mode, which is based on the error of judgment and aims at control the chopper output voltage.
采用基于误差优先判断的PID控制方式来控制斩波器输出电压，从而实现电源输出功率的控制；
Second, the management of power output power can be carried out by PID control mode, which is based on the error of judgment and aims at control the chopper output voltage.
应用推荐