配套型控制仪的最大输出位数是固定的，它适用于相应规格的脉冲袋式除尘器。
The maximum output digits of supporting type control device are fixed, which is suitable for the pulse bag house of the corresponding specification.
当接收到短脉冲检测开始触发信号时，向自动增益控制放大器(201)输出一个增益控制信号，以便用最大值进行放大。
Upon reception of a burst detection start trigger signal, a gain control signal is output to an automatic gain control amplifier (201) so as to perform amplification with a maximum value.
在此基础上提出了利用输出电压的脉冲微分反馈对这类电路系统中的混沌进行控制的方法。
Then based on the above analysis, we present the method of using output voltage pulse differential feedback to control chaos in the buck converter.
控制仪每次输出一位的驱动电压，一个驱动电压持续时间，称为脉冲宽度。
The control device creates driving voltage output every time. One driving voltage has duration, called a pulse width.
研究了多重化逆变器的一种控制方法，采用逆推的方法确定各单元的触发脉冲，通过多重移相叠加原理得到正弦波输出。
A new control method of multiunit inverter is described, which determines the triggering pulse for each unit to obtain the sine wave output through multiple-phase shifting superimposition principle.
控制简单，使用方便。所输出的参数容易辨认和调整。操作界面可以选择非手工排队和脉冲。
Controls are simple and easy to use. Output parameters can be easily identified and adjusted. Operator interface has optional hands free aligning and pulse triggering.
研究了非线性模糊脉冲系统的静态输出反馈鲁棒模糊控制问题。
The problem of robust output feedback fuzzy control of nonlinear fuzzy impulsive systems is considered in this paper.
只要控制接收器中超辐射的光电转换电平，就能控制打开Q开关时的反转粒子数，也就能稳定输出的巨脉冲激光。
So we can control the population which can trigger the Q-switch by controlling the superradiant convert electrical level in the superradiant detector and then the laser output can be stabilized.
每来一个时钟脉冲，N位加法器将频率控制数据m与相位寄存器输出的累加相位数据相加，并将结果送相位寄存器输入端。
Frequency controlled data (m) plus an accumulative phase data output by a phase register in an N-bit adder when a clock pulse comes, the result is sent to the input port of the phase register.
该运动控制卡能同时采集四轴的编码器脉冲信号，输出四路模拟电压控制伺服电机，同时能控制I/O信号的输入和输出。
The card can collect four axes' encoder pulse signals simultaneously, and control servo motor by four output analog voltage. Furthermore, it can control input and output I/O signals.
改变变频器的输出电压或输出电流有二种不同的方法，即PAM脉冲幅值调制控制和PW M脉冲宽度调制控。
Change the inverter output voltage or output current are two kinds of different ways, namely, PAM pulse amplitude modulation control and PWM control pulse width modulation.
控制仪通电后数码管显示和按键输入正常： （1）输出LED指示灯没有亮，电磁脉冲阀也不动作， 则有可能SD-M-3002电路损坏。
After the control device is powered on, nixie light display and key input is normal: (1)Output LED indicator is not lit and electromagnetic pulse valve does not work.
两种形式的输出幅度可以通过改变直流电源电压或通过改变脉冲宽度(脉宽调制pwm)来控制。
Output amplitude in both modes can be controlled by varying the DC source voltage or by varying the pulse-width (pulse-width modulation, PWM).
实验结果表明，采用微机软件实现脉冲移相控制，可有效地改善脉冲对称度，提高整流输出电压精度。
The experimental results show that the pulse shifting phase control by using software can improve effectively the pulse symmetry and the precision of the d. c. output voltage.
通过使用可编程控制器中的专用脉冲输出指令和高速计数器，实现了对辐照仪步进电机的精确控制。
The accuracy control of the motors in Gamma-ray irradiation of blood is realized by means of the inner pulse output code and the high-speed counter in PLC.
为了将传感器输出的轮速信号转换为abs电子控制器只能识别脉冲信号，设计开发了专用信号处理电路。
In order to transform the wheel speed signal to the form that can be identified by the ABS ECU, we design a special signal processing circuit.
在运动控制模块中最主要的工作有步进电机脉冲的发送、方向控制、输入输出信号的处理等。
The motion control module is responsible for pulse transmission, direction control and input-output signals' disposal.
控制器控制脉冲发生器所输出的脉冲的定时，以使得每个脉冲的周期与预定衰减量相关。
The controller controls the timing of the pulses output by the pulse generator such that the period of each pulse relates to a predetermined decay amount.
拦截器的发动机为带脉冲型发动机，从而限定了作动器的输出集。对于该拦截器的姿态控制，提出了基于决策树的控制方法。
The idea of control based decision tree was proposed for attitude control of the space interceptor with the on-off actuators.
利用可编程序控制器脉冲输出指令控制步进电机的转速、方向和移动距离，从而实现精确定位。
PLC used Pulse Output Function to control the stepper motor speed, direction and distance of movement, accordingly realizing the purpose of exact orientation.
通过控制激光通过声光窗口的光束大小来约束声光开关的上升沿时间，以此判断对输出光脉冲的形状的影响。
The characteristics of Q-switched pulses with different rise time of AOM regulated by the laser beam size along the window of AOM are presented.
利用工控机控制继电器选择不同的充放电电容，就能调节输出陡脉冲的脉宽。
Controlling relays to choose different capacitors with ICC, the width of output pulse can be adjusted.
此方法无须接口电路改造，利用软件，由CTC (O)通道定时，PIO输出正弦调频脉冲和方向控制脉冲。
This method USES software only and need not reform the interface circuits. The CTC (0) fixes time and PIO gives sine modulated pulses.
针对阳极控制电源的输出脉冲宽度变化大的特点，采用串联固态开关控制阳极电压。
Since the output pulse width of the anode control power supply had varied greatly, the series-connected Insulated Gate Bipolar Transistors(IGBT) switch was applied to anode control power supply.
针对阳极控制电源的输出脉冲宽度变化大的特点，采用串联固态开关控制阳极电压。
Since the output pulse width of the anode control power supply had varied greatly, the series-connected Insulated Gate Bipolar Transistors(IGBT) switch was applied to anode control power supply.
应用推荐