本文对于包含多输入多输出控制器的鲁棒控制系统作了系统化的研究。
A systematic procedure has been developed for the synthesis of robust regulatory control systems comprising multi-input multi-output controllers.
本文介绍带有未建模动态的倒立单摆非线性模型的全局自适应实际跟踪输出控制器的设计。
This paper introduces an adaptive practical output tracking control algorithm for inverted pendulum which is a nonlinearly parameterized system with unmodeled dynamics.
根据高频机箱中受控对象的使用要求，采用AT 89 C52为核心电路，设计了多路电压量输出控制器。
According to usage request of controlled objects in high frequency box, adopt AT89C52 for the core electric circuit, designed multiplex voltage output controller.
因此，在控制器中，我们会访问模型，并获得所有创建完毕的模型，这样，所有视图所要做的就是输出某些数据。
So in the controller, we are going to be accessing the Model and getting it all set up so all the view has to do is spit out some data.
另外，在Console中，请注意来自控制器servlets .GoogleSearchServlet的输出向我们提示了在调用视图results . js p为浏览器处理结果之前发生了什么事情？
Also, in the Console, note that output from the controller servlets.GoogleSearchServlet gives us hints of what went on before the view results.jsp was called to render the results for the browser.
修改getMsg.rhtml视图模板以输出在Helloadmin控制器类的getMsg方法中定义的 @service_output变量的值。
Modify the getMsg.rhtml view template to output the value of the variable @service_output, which is defined in the Helloadmin controller class's getMsg method.
只有在需要多种表示输出类型，并且输出类型被单一的控制器及后端支持时才使用XML/XSLT。
Use XML/XSLT only in cases where you have multiple presentation output types that must be supported by a single controller and back-end.
对于离散时间线性系统的输出反馈设计，我们考虑使用预测型降维观测器的积分控制器。
For the output feedback design of discrete-time linear system, we consider the integral controller using prediction type reduced-order observer.
微分动作(字母d表示)测量并对过程信号变化率进行反应，调整控制器的输出以达到最小的突出峰。
Derivative action (referred to by the letter d) measures and responds to the rate of change of process signal, and adjusts the output of the controller to minimise overshoot.
如果两个控制器的信号输入端并联输入，其输出端用矩阵方式连接后，将扩展成256路。
If two signal importations of controller carry to merge the importation, its exportation will expand after carry use the matrix method conjunction 256 roads.
讨论了网络控制系统在输出反馈情况下随机最优控制器的设计；
The design of stochastic optimal controllers of networked control systems with output feedback is also presented.
一个真空开关是提供广泛的监测和提供输出，以便与系统控制器。
A wide range of vacuum switches are offered to monitor and provide output to integrate with the system controller.
设计出传感器输入输出信号调理电路和试验台架液压激振系统、磁流变阻尼器控制器的功率放大电路。
Design the signal adjust circuit for sensor, and the power amplification circuit for the hydraulic pressure system of test platform and the controller of magnetorheological dampers.
在仿真试验中用动态神经网络所得到的控制算法对模型的输出进行跟踪控制，从仿真结果图可以看出这种控制器能获得较好的控制效果。
Control parameter gotten by dynamic neural network is used to control the model's output in simulation. The result concludes that the controller can get better control result.
在本章，我们将向你演示控制器是如何实现的，以及你能够把控制器用来接收并生成输出的不同方法。
In this chapter, we will show you how controllers are implemented and the different ways that you can use controllers to receive and generate output.
文章应用模糊控制技术，设计一种二输入三输出自适应模糊pid控制器，对锅炉水位进行控制。
Fuzzy control technology was applied to design a two-input and three-output self - (adapting) fuzzy PID controller to control the water level of boilers.
数字控制器可以控制使用一个本地温度，其输出可以是任何行业标准相匹配的电源控制器的用户可配置的模拟输入。
Digital controller can be used with a local temperature controller, the output of which can be any industry standard matched to the power controller's user-configurable analog input.
在此基础上，构造出了模糊控制器的输入输出语言变量值的隶属度函数和模糊控制规则。
So the membership function of input and output lingual variables and control rules are formed in this thesis.
论文的主要结果有(1)对双速率采样系统，分别给出了基于状态空间模型和输入输出模型下的预测控制器的设计方法。
The main results are: (1) For a dual-rate sampled system, the design methods of predictive controller based on state-space model and input-output model are given respectively.
其他常见的是CXD2500等等，依照他们的语法方式不同，有些飞利浦伺服控制器也输出EIA J信号，而不是输出i2s的。
Other common ones are CXD2500 etc etc. Depending on the way they are programed, some Philips servo controller also outputs EIAJ signals instead of I2S.
采用单一传感器的单输入单输出回路控制器在工业控制领域应用非常广泛。
Single input and single output loop controller using one sensor is widely applied in the industrial control field.
一种含有三个离散输出值的多位置控制器。
A multiple - position controller which has three discrete values of output.
在某些使用场合，控制系统需要较多的可编程控制器输出点数而对控制功能要求不高。
On some occasions, the controlling system requires more programmable controller output points and does not require higher controlling functions.
本文将最小误差激励(mee)法推广应用于多机电力系统分散输出反馈控制器的设计。
This paper proposes the application of extended minimum error excitation (MEE) method to designing decentralized output feedback controllers for multi-machine power systems.
通过对一个非线性质量块-弹簧-阻尼器系统输出反馈控制器的设计和计算机仿真，验证了方法的有效性。
The output direct feedback controller design and simulation results of a nonlinear mass-spring-damper mechanical system show that these methods are effective.
通过对一个非线性质量块-弹簧-阻尼器系统输出反馈控制器的设计和计算机仿真，验证了方法的有效性。
The output direct feedback controller design and simulation results of a nonlinear mass-spring-damper mechanical system show that these methods are effective.
应用推荐