该图像传感器集成了一个可编程偏移和增益为每32LVDS输出通道放大器。
The image sensor integrates a programmable offset and gain amplifier for each channel of the 32 LVDS outputs.
在某些使用场合，控制系统需要较多的可编程控制器输出点数而对控制功能要求不高。
On some occasions, the controlling system requires more programmable controller output points and does not require higher controlling functions.
在系统的设计中，保留了传统的可编程控制器（PLC）的多点输入和多点输出控制的要求。
The demands of control of multiple input and output in the conventional PLC are maintained.
PGA309作为数字化可编程信号调理芯片，主要用于电阻桥式压力传感器，将微弱的传感器桥路信号进行放大输出。
As a digital programmable chip of signal conditioning chip, PGA309 is mainly used in resistance bridge pressure sensors, it amplifies and outputs the weak signal from the sensor.
介绍了一种新型单道，将超大规模可编程集成电路FPGA和一种新的方法相结合，对脉冲幅度甄别的输出信号直接进行处理。
A novel SPHA comprised by FPGA and a signal processing method that can avoid the error output of traditional SPHA is introduced in this paper.
调制器输出由三个级联的有限脉冲响应（FIR）滤波器及后置的一个用户可编程后处理器处理。
The output of the modulator is processed by three cascaded finite impulse response (FIR) filters, followed by a user-programmable post processor.
LTC 6915是具有14级可编程增益的仪表放大器，采用轨对轨输出，其增益可通过串行或并行接口方便设置。
The LTC6915 is a precision programmable gain instrumentation amplifier with rail - to - rail output. The gain can be programmed to 14 levels through a parallel or serial interface.
介绍了可编程视频输入编码芯片SAA7111和可编程视频解码输出芯片SAA7185工作原理和接口电路设计。
Introduces operation principle and interface circuit design of Video Input Processor SAA7111 and Video Output Processor SAA7185.
介绍了人们在实践中总结出的关于可编程序控制器的输入输出点数的扩展及节省的方法。
This article introduces the methods concluded from practice about the expanding and saving of data units of imput and output capability of PLC.
输出时钟信号还具有可编程的相移和占空比调节等高级时钟变化功能。
The output clock signal has advanced clock shift ability such that the phase shift and duty cycle are programmable.
它的输出纹波和噪声较低，并内置测量和基本的可编程功能。
Its output ripple and low noise, and built-in measurement and basic programmable functions.
除了许多的可编程功能，还提供了两款PNP开关输出和一个4到20毫安的电流输出。
In addition to many programmable features, it also provides two PNP switch outputs and a 4 to 20 ma current output.
通过使用可编程控制器中的专用脉冲输出指令和高速计数器，实现了对辐照仪步进电机的精确控制。
The accuracy control of the motors in Gamma-ray irradiation of blood is realized by means of the inner pulse output code and the high-speed counter in PLC.
该系统实现了可编程输入输出（PIO）和超级直接存储器存取（UDMA）两种模式，实际运行效果良好，达到USB2 .0的高速率传输要求。
The system realizes two modes of PIO and UDMA. The running practice shows good effect and the high speed transmission of USB2.0 is achieved.
具备特定功用的控制输入和可编程输出继电器。
Control inputs and programmable output relays for specifics functions.
调制器输出由一系列低通滤波器处理，最后一个滤波器具有默认的或用户可编程系数。
The modulator output is processed by a series of low-pass filters, the final one having default or user programmable coefficients.
荟英社的可编程温度控制器采用了紧凑的设计和两个开关输出或一个模拟输出。
EGE's programmable temperature controllers feature a compact design and two switching outputs or one analog output.
两线串行接口，实现输出会被强制平仓，调整和上升和下降，在可编程的摆率与测序的延迟时间。 输入和输出电压，以及输入和输出电流和温度是可读的。
The two-wire serial interface enables outputs to be margined, tuned and ramped up and down at programmable slew rates with sequenced delay times.
利用可编程序控制器脉冲输出指令控制步进电机的转速、方向和移动距离，从而实现精确定位。
PLC used Pulse Output Function to control the stepper motor speed, direction and distance of movement, accordingly realizing the purpose of exact orientation.
基于EPP协议的特点，应用复杂可编程逻辑器件(CPLD)开发了移位寄存器输出接口。
Based on the properties of Enhanced Parallel Port (EPP), an interface of shift register output has been developed using Complex Programmable Logic Device (CPLD).
可编程控制技术可针对不同的电火花条件，改变高压整流装置的输出电压，以保持适中的火花率，从而使收尘器的收尘效率达到最佳。
According to various conditions of electric spark, the programmable control technology can be used to chang the output voltage of the high voltage rectifier unit to keep the spark...
可编程补偿电路能够用来多路复用来自每一个放大器电路的不同的放大输出信号并且提供数字输出。
A programmable compensation circuit can be utilized to multiplex different amplified output signals from each of the amplifier circuits and to provide a digital output.
本文采用GE -I系列可编程控制器（PLC）的计数器来模拟鼓形控制器，由于用软件来实现，因此编程、修改灵活方便，而且总步数和输出点数可以满足所有场合的需要。
GE-I Series PLC is used to simulate drum controller in this paper. Because of implement with software, it is easy to modify program, and its total steps, output points can be used in all conditions.
该控制器配有6个可编程继电输出器，可供控制和报警。
This controller has six programmable relay outputs that can be used for control and alarm.
控制热输出与定时器或可编程恒温器。
Control heat output with a timer or programmable thermostat.
该驱动板以现场可编程逻辑门阵列为DSP与编码器、脉冲命令和功率模块等电路之间的接口，以最新的智能功率模块(IPM)作为功率输出驱动芯片。
FPGA is used as interface between the DSP and the encoder, pulse command and power module. The latest intelligent power module (IPM) is used to provide the function of power stage.
此种响铃器实际为一种可编程时间控制器，它提供定时控制输出接口，可方便地用于各种定时控制。
Such loud bell device reality is a kind of programmable time controller, it offers and controls and exports the interface regularly, can be used in various kinds of to control regularly conveniently.
调制器输出由一系列低通滤波器处理，最后一个滤波器具有默认的或用户可编程系数。
The modulator output is processed by a series of low-pass filters, with the final filter having default or user-programmable coefficients.
调制器输出由一系列低通滤波器处理，最后一个滤波器具有默认的或用户可编程系数。
The modulator output is processed by a series of low-pass filters, with the final filter having default or user-programmable coefficients.
应用推荐