最后给出输出光束特性的预测。
The prediction of the optical performances are presented last.
最后给出输出光束特性的预测。
输出光束直接耦合进入12信道的光纤阵列中。
The outputs of the VCSEL array are directly butt coupled into a 12 channel fiber array.
阐述了对激光器输出光束进行空间整形的必要性。
The necessity of spatial shaping for laser beam is explained.
通过这项技术,可以有效提高光纤输出光束的光亮度。
The use of the lensed fiber can improve the fiber output beam brightness greatly.
实验验证了激光器输出光束质量随出光时间的延长而逐渐变坏。
The correlative experiments show that laser output beam quality becomes worse when the laser works longer.
报导用CCD摄像机检测激光器输出光束的指向稳定性的实验结果。
The experiment results of laser output beam pointing stability by measured with CCD camera is prevented.
在端面抽运和边缘抽运时,比较了正支和负支非稳腔的输出光束特性。
The beam characteristics with positive and negative branch unstable resonators were compared for end-and edge-pumped lasers.
本文认为,输出光束的漂移主要是器件不稳定热传导引起毛细管摆动所致。
This paper suggests that the main cause of the beam drift of laser output is capillary sway due to unstable thermal conduction.
为了改善光纤激光器的输出光束特性,将光纤端面加工处理成近似凸球面。
In order to improve the beam properties of fiber lasers, the fiber-end surface is processed similar to a convex spherical surface.
滤光片中的液晶厚度、液晶分子的排列方向比较灵活,输出光束不发生偏离。
The thickness of the liquid crystal and the arrangement of liquid crystal molecule are flexible, there are no deviation in the outgoing beams.
实验结果表明,抽运功率越高,热焦距越小,热效应对输出光束质量影响越严重。
The experiment shows that the higher the pump power is, the smaller the thermal focal length is, and the worse the thermal effect influent the output beam quality.
使用非均匀反射镜,可以起到软边光阑的作用,改善了输出光束的光场分布特性。
Using variable reflective mirror, as a soft edge diaphragm, the intensity distributions of output laser are improved.
随着大功率激光器的研制成功和推广应用,光纤输出光束的质量制约着激光器的应用。
With the successful development and promotion application of high-power laser, the quality of optical fiber output beam constraints the application of optical fiber.
介绍了一种改善准分子激光输出光束光强均匀性的新方法,给出了实验结果和简要的分析。
In this paper, a new method to improve the intensity homogeneity of the output beam of an excimer lasers is introduced. Experimental results and a concise analysis are presented.
采用矩阵光学理论和实验相结合的方法,分析了输出镜对双棒串接固体激光器输出光束的影响。
Influence of position of output mirror on beam of two rod solid state laser has been analysed by means of matrix optics and experiment.
然后分别描述了用光束质量分析仪器对宽脉冲激光器输出光束进行测量的装置、方法和测试结果。
Respectively, the width-pulse laser beam measured the output of the devices, methods and test results have been survey by the laser beam analyzing system.
提高系统能量转换效率与输出光束质量一直是研制高功率固体激光系统极为关注的两类重要问题。
How to improve the output energy and beam quality were two most noteworthy problems in the building of high power solid-state laser facility.
最后测量了单横模激光器在非稳腔下的输出光束质量,以及系统的效率,并对测量结果进行了分析。
At last, has measured the quality and efficiency of exporting light beam in the signal horizontal model laser device, and analyze the measuring result.
讨论了激光晶体的热效应以及激光模半径与泵浦光斑半径匹配对激光输出功率和输出光束质量的影响。
The influences of thermal effects and the matching of the laser mode radius with the pump spot radius on the output power and beam quality are discussed.
根据KM6太阳模拟器光学装校系统的技术要求,文章提出了半导体激光器输出光束的两套准直方案。
To meet the technical requirements of KM6 solar simulator optical adjustment system, two kinds of schemes are put forward to collimate the semiconductor laser beam.
本发明简单易行,在随时满足系统对激光需求的基础上,大幅度地提高了脉冲调q激光器的输出光束稳定性。
The invention is simple and easy in operation, and vastly improves the output beam stability of the pulse tuning Q laser on the basis of satisfying the demand of the system on laser at any time.
然后分别在空腔和考虑热透镜效应的情况下对输出光束的光场分布进行了理论模拟,并讨论了热透镜效应对输出光场分布的影响。
Then the output intensity distributions are simulated with or without considering the thermal lens effect. And the influence of the thermal lens effect is discussed.
二极管泵浦固体激光器(DPL)输出光束的方向在某个微小范围内存在随机变化,这种光束指向性的波动在某种程度上严重制约了DPL的应用。
The output beam of diode pumped solid-state laser(DPL) has minute random variation in direction, which results in the restrictions on the appliance of DPL.
光束质量好,输出激光稳定性高,打标效果较易调试。
With good beam quality, the stability of output laser power, it is easy to adjust the marking effect.
应用研究的前提是获得能够满足应用要求的X射线激光输出,因此如何获得高亮度、高相干性、高光束质量的饱和X射线激光输出是X射线激光研究的首要内容。
The basis of applications is the output of X-ray laser with high brightness, high coherence, and good beam quality So it is a main aim and contents for studies to achieve X-ray laser.
当固体激光器运转在低阶混合模时,既可得到较高的功率输出,又可保证较好的光束质量。
A solid state laser operated at lower-order mixed mode possesses both advantages of high output power and good beam quality.
计算结果表明,这种热效应对激光输出平均功率与光束特性有不可忽视的影响。
The calculated results show that its effects on the average laser output power and beam quality are noticeable.
部分端面抽运的板条激光器是一种新型固体激光器,配合混合腔可以实现在大功率下保持高光束质量的激光振荡输出。
Partially end-pumped slab laser is an innovative solid state laser. Combining the hybrid resonator with partially end-pumping, the output power can be scaled at high beam quality(called InnoSlab).
部分端面抽运的板条激光器是一种新型固体激光器,配合混合腔可以实现在大功率下保持高光束质量的激光振荡输出。
Partially end-pumped slab laser is an innovative solid state laser. Combining the hybrid resonator with partially end-pumping, the output power can be scaled at high beam quality(called InnoSlab).
应用推荐