免费控制工具，以及在它们基础上自行开发的系统，只为检查文件的输入输出提供了初步的支持。
Free source control tools, and the homegrown systems based on them, provide only rudimentary support for checking files in and out.
输入输出都是未知的或仅仅初略定义的，过程转换缺少必要的精确性，并且质量控制也是未定义的。
The inputs and outputs are either unknown or loosely defined, the transformation process lacks necessary precision, and quality control is not defined.
Chrome系统可能只提供很少的硬件控制功能和输入输出方式。
Chrome OS tablets will likely have very few hardware controls and little in the way of inputs and outputs.
它也指挥着CPU和输入输出设备之间的控制信号。
It also directs these control signals between the CPU and input and output devices.
在此基础上，构造出了模糊控制器的输入输出语言变量值的隶属度函数和模糊控制规则。
So the membership function of input and output lingual variables and control rules are formed in this thesis.
本方法以实际系统的输入输出信号为依据，实现系统建模，用被控对象传递函数的逆作为串联控制器来对系统的动态特性进行控制。
Using the input and output signal, the method can model the system, and can control the dynamical property of the system with the inverse transfer function of the controlled object as the controller.
设计出传感器输入输出信号调理电路和试验台架液压激振系统、磁流变阻尼器控制器的功率放大电路。
Design the signal adjust circuit for sensor, and the power amplification circuit for the hydraulic pressure system of test platform and the controller of magnetorheological dampers.
在系统中专门设计了输入输出点处理电路，它可以实现32个输入点信号的输入和实现32个输出点的控制。
Processing circuits of input and output are designed specially, which can realize the input of 32 inputting signal and control of 32 outputs.
基于CPU 224的输入输出点数有一定的局限性，此控制系统将显示灯部分只表示出了一组红绿灯指示工作与停止。
CPU 224 based on input and output points have certain limitations, the control system will show some light to show only a set of traffic lights work and stop instructions.
该编码器具有十分灵活的控制方式，以满足不同的输入输出以及质量等要求。
This encoder has a very flexible control mode to meet the diverse inputs, outputs and quality demands.
论文的主要结果有(1)对双速率采样系统，分别给出了基于状态空间模型和输入输出模型下的预测控制器的设计方法。
The main results are: (1) For a dual-rate sampled system, the design methods of predictive controller based on state-space model and input-output model are given respectively.
给出了机械模型、控制模型和两者间的输入输出，以及目标运动模型的建立方法。
The modeling methods of mechanic model, control model, output and input between these two models, and object motion model were given.
这些条件也可用来解决实际控制系统的动态输入输出解耦问题。
These conditions can be used to solve the decoupling problem of dynamic input and output of an actual control system.
保护装置集成了监测、运算、控制、输入输出及通信等多种功能。
The protection device integrates many kinds of functions such as monitoring, calculation, control, input, output and communication.
输入输出受限非线性系统的预测控制问题，可以看作是一个难以直接求解的约束非线性优化问题。
Predictive control algorithms for a multivariable nonlinear system with limited inputs and outputs can be formulated as a constrained nonlinear optimization problem which is hard to solve.
主要论述了在PLC控制系统中，为了提高系统的安全可靠性，PLC的输入输出接口应注意的事项和较实用的接线方式。
The paper mainly discussed the practical connection modes in the PLC the points of attention for PLC control system, so as to improve input and output interface and the system safety and reliability.
经验过程的模型是通过将观察到的输入输出进行分类，将限制其在一定范围内发生的控制进行定义得到的。
Models of empirical processes are derived categorizing observed inputs and outputs, and defining controls that cause them to occur within prescribed bounds.
采用广义输入输出包含原理将多余度控制系统表示为多重包含系统，使之易于分析与设计。
A generalized input and output inclusion principle is used to express the multiple redundant control systems so that the analysis and design procedure are simplified.
可以证明多模型自适应控制器能够保证闭环系统是输入输出有界稳定的。
The closed-loop system is proved to be bounded-input and bounded-output stable when the multiple model adaptive controller is used.
涉及的嵌入式网络化装置是一个具有以太网接口的分布式输入输出装置，主要应用于工业自动化控制领域，对大型设备实施远程监控。
The embedded network device resarched is a distributed I/O device which has an ethernet interface, it is applied mainly in industrial automatic control field to monitor heavy-duty equipments remotely.
因此，该LCD显示系统可作为多种嵌入式工业控制领域的输入输出设备。
Therefore, this LCD display system can be used as the input and output control device in many embedded industrial control fields.
控制器的设计是直接基于称为伪偏导数的向量，伪偏导数是通过新型参数估计算法，根据给出的永磁直流直线电机非线性系统模型的输入输出信息在线导出的。
The design of controller is based directly on pseudo- partial-derivatives (PPD) derived on-line from the input and output information of the system using a novel parameter estimation algorithm.
本系统硬件结构采用了一种基于工业控制计算机（IPC）的工业控制解决方案：在IPC上执行控制逻辑，IPC直接通过I/O板卡处理输入输出。
This system hardware construction adopts an Industry control solution based Industry control computer, which carry out control logic on IPC, IPC handle input and output by I/O plank card.
提出了两种模拟二极管正向导通输入输出特性的数学函数，进行数字序列峰值因数的控制。
Two input-output soft-clip functions that mimic the diode full-wave soft clipping have been designed to control the peak factor of digital sequences.
该算法能够控制子任务执行顺序和降低控制输入输出延迟。
This scheduling algorithm can control the execution sequence of subtasks and reduce control input output delay.
在认真分析了巡航控制系统的基本原理，确定了输入输出信号以后，提出了一种闭环控制的巡航控制系统设计方案。
After analyzing the basic principle of CCS and defining input signals and output signals, a kind of close-looped control scheme is brought forward.
控制系统包括电控柜、控制台，显示器和电脑。控制系统具有良好的人机界面、数据输入输出功能、图形显示系统。
Including power panel, control desk, monitor display and PC computer, the PLC control system has friend interface, data input and output, diagram display.
首先，采用PD控制器控制倒立摆，采集倒立摆的输入输出数据；
Firstly, a PD controller is used to stabilize the inverted pendulum, and the inverted pendulum′s input and output are sampled.
所以，本论文最后采用了遗传算法对输入输出语言变量的隶属函数进行优化以改善模糊控制器的性能。
So, at last, Genetic Algorithms are capitalized on to optimize the membership functions of the input and output linguistic variables of the fuzzy controller so as to better its performance.
在这篇论文中，只使用静态模型来获取稳定状态下输入输出的关系，从而简化了建模过程和控制器的设计。
In this paper, only static models were used to capture the input-output relationship in the steady state, which simplifies both the modeling pro-cess and the controller design.
应用推荐