研究两个单输入控制系统的同时稳定问题。
The problem of simultaneously stabilizing two single input systems is studied.
小巧轻便真空开关提供的监测水平，提供一个“对象笼罩”输入到控制系统。
A compact lightweight switch offered to monitor vacuum levels, which provide an "object gripped" input to the control system.
例如，源代码控制系统Subversion提供了许多二级命令，您在输入其他参数之后另外输入这些命令。
For example, Subversion, the source code control system, provides a number of secondary commands that you type in addition to other arguments.
电子控制系统基本上由计算机或电子控制组件、发动机显示线束、输入的传感器和输出的执行器组成。
The electronic control system consists basically of the computer or electronic control module, engine wiring harness, input sensors, and output actuators.
分析了单饱和输入下控制系统的相空间分布规律并给出了具体的饱和输入下非线性控制系统的空间结构。
The phase space of control systems with saturated input is analyzed and the space structure of control systems with saturated input is presented.
以典型的航天员推离动作对飞船的扰动力矩作为控制系统仿真的输入参数，分析姿态控制系统受到扰动后的响应。
Put the disturbance moments of typical astronaut's push-off act as the input datas of the control system simulation, and analyze the response of the attitude control system after disturbed.
基于CPU 224的输入输出点数有一定的局限性，此控制系统将显示灯部分只表示出了一组红绿灯指示工作与停止。
CPU 224 based on input and output points have certain limitations, the control system will show some light to show only a set of traffic lights work and stop instructions.
本文讨论了一种仿人智能控制方法，并将其具体应用于二输入、二输出的液位控制系统。
The paper discusses an artificial intelligent control means which is particularly used in the liquid level control system with double input and double output.
就输入存在饱和特性的离散时间参考模型自适应控制系统进行了探讨。
This paper researches the adaptive control system of discrete time reference model of input saturation character.
这些条件也可用来解决实际控制系统的动态输入输出解耦问题。
These conditions can be used to solve the decoupling problem of dynamic input and output of an actual control system.
这种方法节约了PLC的输入口，为PLC控制系统的操作面板的设计提供了便利的手段。
Input modules of PLC can be saved and a convenient means for design of operational board in PLC control system is provided.
根据输入、输出的要求对控制系统的硬件进行设计，包括数据采集、人机通道的设计。
According to input, the output request has carried on the design to the control system hardware, including data acquisition, man-machine channel design.
由于在补偿方法中采用了数字滤波和样条插值技术，使得所建立的控制系统对任意的输入作用都具有良好的稳定性和补偿效果。
Since digital filter and spline interpolation technique have been adopted in the compensation method, the developed control system is both stable and effective to arbitrary input signals.
本文对于包含多输入多输出控制器的鲁棒控制系统作了系统化的研究。
A systematic procedure has been developed for the synthesis of robust regulatory control systems comprising multi-input multi-output controllers.
提出了带有周期通信序列（PCS）的多输入与多输出分布式网络化控制系统的故障诊断方法。
The fault diagnosis of multi-input and multi-output distributed networked control system with periodic communication sequence(PCS)was investigated.
设计一种以串行输入为基础，串并混合方式输出的多路控制系统。
A multiplex control system based on serial entry and output in series-parallel mixed mode is designed.
虚线表示，通过攻角指示器，有可能直接输入到控制系统去。
The dash line indicates the possibility of a direct input to the control system through an angle-of-attack indicator.
针对多输入多输出非线性锅炉-汽机系统在大范围运行工况下参数发生变化的情况，设计了基于渐近跟踪控制的T - S模糊控制系统。
T-S fuzzy control system based on asymptotic tracking control is designed for a MIMO nonlinear boiler-turbine system whose parameters vary under the operating condition within wide range.
本文首先针对带有参数不确定性和输入饱和的控制系统进行分析。
In this paper, we firstly analyze the control systems with uncertain parameters and input saturation.
基于变结构控制原理，本文提出了一种变结构控制系统的设计方法，它允许多种形式的参考输入。
Based on the principles of a variable structure system a design method for the variable structure control system with a variety of reference inputs is proposed in this paper.
针对单输入非线性控制系统，提出了一种目标全息反馈的非线性控制设计方法(NCOHF)，以解决非线性控制系统的多目标控制问题。
This paper proposed the nonlinear control design method with objective Holographic Feedbacks (NCOHF) that could solve the multi-objective control problems of the single input nonlinear control system.
在输入方式、控制系统及数据共享、资源共享等方面对SCK电火花线切割机床进行了重大改造。
We have made a major reformation on SCK electric spark linear cutting machine in terms of control system, data sharing, resource sharing etc in the input mode.
针对单输入单输出和多输入多输出网络控制系统中存在的时延抖动和时延偏移问题，提出了在控制器和执行器前设置缓冲区的方法。
For the problems of delay jitter and delay skew consisting in SISO and MIMO networked control systems, the method of setting buffers before controller and action is bring forward.
第二种情况是非线性元件在控制系统的任意处而其输入是已知的。
In the second case, a nonlinear element may be situated anywhere in a control loop while the input of the element is known.
由于模型中存在参数的不确定性，利用定量反馈理论原理，设计了变速器输入轴速度鲁棒控制系统。
Owing to the existence of uncertainty in the model, a robust control system of transmission input speed is designed using quantitative feedback theory.
通过解耦，三轴转台系统成为三个单输入，单输出线性系统，为理论分析设计控制系统提供了转台模型。
The model is transformed into three single input and single output linear systems, and then it can be analyzed and designed by the linear system theory.
本文介绍了几种典型的汽车自动变速器锁止离合器电子控制系统，并分析了其输入、输出和控制策略。
This paper introduces some typical electronic control systems for vehicle automatic transmission's lock-up clutch, and analyses the input, output and controlling tactics of the systems.
基于矩量分析，作者提供了一种求单输入线性控制系统极点配置问题的新算法。
A new efficient algorithm for the pole assignment problem of single-input systems is presented in this paper.
本文将预测过程模拟成一个“模糊控制系统”，以预测因子作为系统的输入，预测量作为系统的输出。
This paper simulates the forecast process as a"fuzzy control system", takes the forecast factors as the input data , and the forecast quantities as the output data.
本文将预测过程模拟成一个“模糊控制系统”，以预测因子作为系统的输入，预测量作为系统的输出。
This paper simulates the forecast process as a"fuzzy control system", takes the forecast factors as the input data , and the forecast quantities as the output data.
应用推荐