本文介绍了这种辅助测量工具的结构原理和测量方法。
The article introduces the structural principle and the measuring methods of the tool.
结合作最新的研究成果，重点对结构光法和辅助测量棒法测量作了介绍。
The characteristics and principles of structured light method and AMP method are analyzed in detail.
详细介绍了油管接箍内螺纹计算机辅助测量系统的机械、软硬件结构与原理。
This paper discusses the mechanical, hardware, software configurations and principles of CAT system for joint internal thread in details.
以整个超声振动系统为研究对象，根据力电类比原理，利用计算机辅助测量导纳圆。
The whole ultrasonic vibration system is taken as a researchful object, and the admittance circle, aided by computer, is measured according to the theory of force-electricity analogy.
FARO是一家全球性科技公司，主要从事计算机辅助测量设备和软件的开发和销售。
FARO is a global technology company that develops markets computer-aided coordinate measurement devices software.
网络分析仪结合了频率合成技术、采样技术、宽带扫频技术、计算机辅助测量等新技术。
Network analyzer adopt these new technology such as frequency synthesis, sampling technique, broad-band sweeping and computer-assisted testing.
介绍了一种采用计算机辅助测量设备的接地阻抗的方法，叙述了该方法的原理及硬件通道。
The paper introduces a method using the computer as assistant equipment to measure earthed impedance. It depicts the principle and hardware channel of the method.
实验和计算验证表明，这种测量方法是有效的，可以用于机器人校准、机器人辅助测量以及机器人辅助手术等领域。
The proposed methods are verified through experiments and real data computation, which can be used for robot calibration, robot aided measurement and robot aided surgery etc.
可访问性——测量门户对辅助技术的兼容性，或者测量门户对辅助标准的遵从性。
Accessibility a "measures the compatibility of the portal to assistive technologies or measures the adherence of the portal to assistive standards."
该标准采用了自动反馈和辅助加热器技术，大大缩短了测量时间，提高了校准速度。
Because the automatic feedback and auxiliary heater techniques are used in this standard, the measuring time is greatly reduced, and a high calibration speed is gotten.
该文介绍了研发的汽车安全辅助驾驶系统中通用测量控制模板的各部分组成和设计方法。
This paper presents each component and its design method of general-purpose measurement control board for safety driving assist System.
为了测量拖拉机动力输出轴的输出功率，设计了一套计算机辅助测试系统。
We design a set of computer aided test system for measuring the output power of the tractor motive power shaft.
辅助压力和温度测量让多频相位荧光计是发光探测传感器设计、试和校准的理想选择。
Auxiliary pressure and temperature measurements make the MultiFrequency Phase Fluorometer an ideal choice for luminescence sensor design, testing and calibration.
采用磁栅转矩传感器和一种新的微机辅助相位差检测方法，研制了一套新型动态转矩测量系统。
Based on the magnetic grid torque transducer and a new computer aided method to measure phase difference, a new measuring system for dynamic torque is developed.
结论：应用位相测量轮廓术和逆向工程软件进行单侧眼眶部缺损修复的计算机辅助设计是一种切实可行的方法。
Conclusion: the use of phase measuring profilometry and re software is a convenient and effective method to the computer-aided design for the restoration of unilateral orbital defect.
辅助铁心绕有1 ~ 1000匝的等效测量线圈，从这个铁心上测量到样品的磁通变化。
The flux change in the specimen can be measured from the auxiliary core on which there is an equivalent measuring coil of 1-1000 turns.
还研制了用光学方法测量叶栅前后有关水滴尺寸及其分布的一系列辅助装置。
Series of assistant equipments have also been developed for measuring water-droplets sizes and their distributions in front of and behind the test (cascade) by using optics method.
设有电脑绘图基本原理课、高级电脑辅助设计应用课、测量图绘制课和建筑绘图课。
Courses include computer drafting fundamentals, advanced computer-aided design (CAD) applications, survey drafting, mechanical drafting, and architectural drafting.
对医学图像中指定区域的参数测量在辅助医生诊断和收集病变信息上有着重要的作用。
It plays a very important role on auxiliary medical Diagnosis and collecting information of pathological changes for parameter measurement of designated area in medical image.
用光纤辅助双色红外探测仪和三明治薄膜热电偶同时测量了磨削弧区的温度响应。
The temperature responses in the grinding zone were measured simultaneously using a two color infrared detector and a sandwiched foil thermocouple.
地面伽马能谱测量作为地质填图的辅助手段应用于浅覆盖区是一种尝试。
The ground gamma spectrometry as an auxiliary means for geological mapping in areas with shallow overburden areas is a new trial.
目的探讨采用医学图像分析软件辅助三维CT测量计算眼眶容积的方法及其可靠性。
ObjectiveTo establish and elucidate a feasible method by CT- scanning-based computed tomographic analysis for the volumetric measurement of orbit.
设计了单片机控制双臂电桥测量低电阻电路、多谐振荡测量电容电路、辅助调平电桥电路、输出显示等电路。
The two-arm bridge measuring low resistance circuit of MCU control, multivibrator measuring electric capacity, auxiliary leveling bridge circuit, output display circuit are designed.
目的应用优化计算机辅助解剖测量技术，为经皮逆行髋臼前柱螺钉内固定术提供解剖学基础。
Objective to investigate the optimization technique for computer aided measurement and provide anatomical data for the retrograde acetabulum anterior column screw percutaneously.
针对目前的接地电阻测量方法的缺点，提出了以计算机辅助分析为基础的短电流极引线测量方法，并对电流引线长度的选取作了分析。
With a view to the deficiency of grounding resistance measurement at present, a new method with short current-electrode wire based on computer auxiliary analysis is presented.
本文针对足球比赛中实时信息的提取，设计了一个基于摄影测量的数字辅助直播系统。
This paper designed the digital assisted broadcasting system based on photogrammetry, and it's used for real-time information extraction from soccer match.
结合计算机技术，提出了微机辅助的数字式矢量电压测量系统的设计方案。
Combining with compute technologies, the author puts forward a microcomputer based digital vector voltage measurement sys...
对O形圈模具型腔精确加工中的工艺、测量及加工偏差等几个关键问题进行了分析，并针对实例进行了计算机辅助设计。
The text analyses some key problems of accurately machining of O circle mould cavity, including its technology, measurement, and machining error, and then puts forward a CAD example for it.
对O形圈模具型腔精确加工中的工艺、测量及加工偏差等几个关键问题进行了分析，并针对实例进行了计算机辅助设计。
The text analyses some key problems of accurately machining of O circle mould cavity, including its technology, measurement, and machining error, and then puts forward a CAD example for it.
应用推荐