数值结果表明该方法是带筋支撑板有效的计算机辅助优化设计方法。
Numerical results illustrate the method is an efficient computer aided optimal design method.
根据该模型开发了铝型材挤压平模工作带长度和模孔配置的计算机辅助优化设计系统。
Based on this model a computer aided optimum design system of die bearing length and openings layout for aluminium profile extrusion is developed.
本文叙述了在合理选择铣刀的基础上，对钛合金的端铣切削参数进行了计算机辅助优化设计。
The computer aided optimum design for end milling parameters of Ti-Alloy, based on milling tool selection is dealt with in the paper.
但对于基本参数的优化设计至今尚未见报导，本文对全滚动活齿传动的计算机辅助优化设计作了初步探讨。
But the optimizing design about basic parameters still has not been seen as yet, the disquisition pilot study on the computer assisted optimization design of Oscillatory Roller Transmission.
笔者将数学规划理论与计算机程序设计方法相结合，通过实例对多股螺旋弹簧的计算机辅助优化设计进行了初步探讨。
The disquisition pilot study about the computer assisted optimization design of a screw spring of many radices using math layout theory conjoint to computer programmer method with a exemplity.
介绍了北京钢铁研究总院采用计算机仿真技术与计算机辅助设计技术，开发出具有优化功能的钢管冷拔过程CAD系统通用软件。
The paper introduces CAD system of steel tube cold drawing process which is a software with optimum function developed by Iron & steel General Institute on basis of computer imitation technology.
在没有经验公式参考的条件下，通过编制MATLAB程序完成辅助网络的设计和优化。
Under the condition of having no experience formulation, I designed and optimized the parameter of auxiliary network by MATLAB programme.
结果表明，该优化网络算法具有较快的收敛速度和良好的预测性能，能够成为合金设计有力的辅助手段。
The results show that the network with the optimal algorithm has a high speed of convergence and good quality of prediction, which will be an effective assistant method for alloy design.
此外，该软件也可作为遗传优化和模糊控制器设计的辅助教学软件。
Besides, this software can also be used to computer aided instruction in the integrated optimal design of a fuzzy controller.
本文以尺寸链理论为基础，通过对二阶矩可靠性指标的应用到装配尺寸链的研究，建立计算机辅助公差优化设计的尺寸模型。
Thus a kind of computer aided optimum tolerance design model is built, by the reliability index of second moment based on the Dimension chain theory.
计算机辅助机构最优综合或优化设计问题主要包括两个方面。
Two principal respects are embodied in the computer-aided optimum syn - thesis or design for planar linkages.
本文旨在介绍应用计算机辅助优化寻求最小阻力流体形状的设计和研究方法。
The present paper aims at introducing to a computer aided design and optimization method for deeply submerged shapes in a viscous fluid under parallel inflow conditions.
该技术在辅助铸造工艺设计，优化工艺方案以及缺陷分析等方面可以提供有力的支持。
This simulating technology could give powerful support for aiding the design of foundry technology, optimizing foundry process and analyzing the cast defects.
在光学系统计算机辅助设计、模拟与最优化工作中，广泛采用了非衍射基价值函数的各种评价函数。
In optical design using Computer-Aid-Design, Simulation, and Optimization (CADSO), it is customary to use various kinds of non-diffraction-based merit function.
在实验的基础上，用工程近似法推导出在四辊组合孔型轧制圆系统产品时的力能参数，建立了轧制圆型系统产品的计算机辅助孔型及优化设计。
On the base of experiments, the author deduced some power energy parameters of round bar in four roll pass system, established the computer aided roll pass design.
根据型钢产品计算机辅助孔型设计c ARD的特点，本文采用了动态规划法进行产品优化设计。
According to features of section steel CARD, this paper has introduced dynamic programming method to make roll pass optimum design.
本文从理论上提出计算机辅助设计对焊条进行配方优化设计方法，为焊条的研制提供一条新途径。
It is a new approach for the formula of covered electrode by introducing computer aid optimize design.
结合指令集模拟器、汇编器以及调试器，设计了一个面向VLIW处理器的辅助程序优化环境。
Combined the ISS with an assembler and a debugger, a software optimization development environment for block cipher specific VLIW processor is constructed.
在理论分析、模拟试验和实际使用的基础上，对辅助卸油装置的结构进行了优化设计。
On the basis of theoretical analyses, simulation tests and application actuality, an optimized design on the structure of auxiliary unloading system is made.
介绍了计算机辅助工程(CAE)技术中常用的两种技术：有限元分析和优化设计。
The paper introduces two technology: finite element analysis and optimal design, which are often used in computer-aided engineering (CAE).
优化模型是铁路站场设计优化及计算机辅助设计系统的基础。
Optimization model is the foundation of optimal design and computer aided design system in the design of railway stations.
它是建立在近代数学最优化方法和计算机程序之上，解决复杂设计问题的一种有效工具，是计算机辅助设计(CAD)应用中的一个重要方面。
It is an available tool based on modern optimization method and computer program, resolving complex design problem. It is an important aspect on computer aided design (CAD).
结合包装工程学科的有关领域，论述了计算机辅助包装设计、分析与优化的若干进展，介绍了网络辅助包装设计技术。
This paper discusses the advance of computer aided design, analysis and optimum in packaging engineering, and introduces the technology of net aided packaging design.
一个新产品的功能和成本水平基本上已在产品设计阶段就确定了。研究降低成本的设计技术就是为了给设计师提供一套行之有效的降低和优化成本的辅助设计工具。
The objective of the study of design technique for cost reduction is to provide the designer an effective way to assist them lower and optimize the cost of products.
在推导数学模型和力学模型方面，借助了反求工程、优化设计、计算机辅助等现代设计方法。
On the aspect of creating mathematics and mechanics model, the modernistic design method such as inverse-do engineering, optimization design, CAD was adopted.
在此基础上通过理论分析和计算机辅助分析 ，完成电路的优化设计。
Then the design and optimization are described. Finally the simulation results prove its performance meeting design specification.
在此基础上通过理论分析和计算机辅助分析 ，完成电路的优化设计。
Then the design and optimization are described. Finally the simulation results prove its performance meeting design specification.
应用推荐