机车载荷平衡电脑检测系统专用于铁路机车载荷检测并判定其是否达到平衡。
The locomotive load balance computer testing system is specially used in the testing of locomotive load for concluding whether or not the load is balanced.
(高负载)：用于抓取或平衡最大重量的载荷物。
HILOAD (high load) : used for carrying or balancing the maximum weight load.
LEXS是一个NIEMIEPD框架，它通过将文档分成一个摘要(digest)和一个结构化有效载荷(structured payload)，平衡了互操作性和灵活性这两个对立的目标。
LEXS is a NIEM IEPD framework that balances the competing goals of interoperability and flexibility by separating documents into a digest and a structured payload.
通过优化系统的最优利用率并考虑系统各机器的工作平衡，本文给出了载荷问题三个新的优化模型。
Based on Kusiak's idea, three new models of loading problem with the aim to optimize the utilization ratio ot machines and to balance jobs assigned to each machine are formulated.
承载链直接承受平衡载荷，可大幅度减小主传动链的受力。
The bearing chain bears the equilibrium load to reduce the force on the main drive chain to a great degree.
动态测量包括动态平衡，功效和舵机载荷。舵机载荷对静前沿滞角度后很敏感。
Dynamic measurement includes dynamic balance, power efficiency and servo load. The servo load is highly influenced by static lead lag Angle.
根据气动平衡系统所需功能，设计了压力控制设定、载荷切换控制、执行控制、失压保护和残压释放等功能模块；
All kinds of function modules of pneumatic balance circuits have been designed such as air press regulation, loads switch, execution control, decompression protection and residual pressure exhaust.
介绍自平衡法深层平板载荷试验原理、试验设备及试验方法，并将其与传统单桩静荷载试验进行效益对比分析。
It introduces the principle, equipment and method of deep plate loading test by self-balance method, and compares it with the traditional loading test of single pile.
主传动链与承载链将悬点载荷分解为换向抽汲载荷与平衡载荷。
The main drive chain and the bearing chain divide the polished rod load into reverse pumping load and equilibrium load.
通过对推土机平衡梁和车架纵梁的工作应力测定与分析，掌握了推土机的强度设计方法，为编制载荷谱打下基础。
Through test and analysis of working stress on balance beam and lengthwise beam of dozer frame, a strength design method and the basis for compiling load spectrum are given in the paper.
在平衡裂纹条件下，将塑性部分表达为该载荷与裂纹长度的函数。
Under the condition of equilibrium crack the plastic component of the displacement can be regarded as a function of load and crack length.
HILOAD(高负载)：用于抓取或平衡最大重量的载荷物。
HILOAD (high load) : used for carrying or balancing the maximum weight load.
物理上，这表示HDAJ接头桩的平衡构形在临界载荷处必然发生改变，并且从一个稳定的平衡构形变化到另一个稳定的平衡构形。
Physically, this means that the equilibrium configuration of HDAJ spliced pile must occur branches at a critical load and it changes from a stable equilibrium state to other stable equilibrium state.
本文在分析总结经验法和极限平衡法等理论计算方法的基础上，从快速载荷试验曲线预测的角度对强夯碎石墩的极限承载力进行了研究。
Based on the analysis and conclusion of the theoretical methods, research has been made on the ultimate bearing capacity of gravel stake by predicting the entire curve of fast load test.
为了进一步补偿载荷沿轴向偏移时产生偏转力矩的影响，本文提出了开平衡孔的补偿措施，试验表明补偿效果明显。
In order to further compensating the influence of the deflection moment formed by the load bias along the spool, a balance hole is proposed which has been shown with apparent compensating effect.
给出了自平衡端头载荷问题应力衰减率分析的一种方法。
This paper presents a method for stress decay rate analysis of the self-equilibrated end load problem.
对对称三杆桁架承受载荷后的弹粘塑性平衡问题进行了分析。
The viscoplastic balance of a symmetric three-bar truss supporting the load has been analyzed.
介绍板在单向压缩和剪切载荷作用下的屈曲模态、临界载荷和平衡路径。
This chapter indicates buckling modes, critical load and equilibrium path of plate under axial compression and shear load.
介绍了直线电机驱动抽油机的工作原理、结构和特点，对其悬点运动、载荷及平衡重的计算作了分析，研究了修井作业时应注意的事项。
The working principle, structure and features are introduced in this paper. An analysis of calculation for lifting point movement, load and balance weight is introduce as well.
自平衡法是一种新型的桩基承载力测试方法，与传统静载荷试验方法相比具有许多优点。
As a new method to test pile's bearing capacity, self-balancing method has many advantages over the traditional ones for static loading test.
曲轴上平衡重的安装减小了曲轴所受的弯矩，但也影响了主轴承载荷的大小和分布。
The counterweight is installed on the crankshaft for reducing the bending moment on it, but it will influence the magnitude and distribution of the main bearing load.
通过建立机构的静力平衡方程，分析了切削加工载荷在各条驱动腿之间的分配情况。
The distribution of cutting force between driving legs is analysised by establishing of static force equilibrium equations.
提出接轴平衡力应该采用欠平衡，平衡系数取0.89，这样既可以降低接轴承受的弯矩，又可以降低接轴虎口铜滑块的载荷。
The lower balance force with balance factor 0.89 is adapted to reduce bending of universal coupling shaft and load of copper slider.
本文采用功率谱分析法讨论了作用在三轴汽车平衡悬挂承载部件上的动载荷问题。
By means of spectral analysis method, the problem of dynamic loads acting on the load-carring components of rear bogie suspension system of a truck is analysed in this paper.
工程结构构件在正常使用载荷作用下，根据结构的正常使用承载力极限状态的要求，必须满足力的平衡条件，即构件不发生失稳现象。
According to requirements of the structural serviceability limit state, the members in structure must be satisfied the equilibrium in practice to avoid instability.
该机具有长冲程、软性换向、对称对拉、高度平衡、高效节能、大载荷等特点，经过辽河油田试用，效果良好。
It features long stroke, soft direction changing, balanced height, high efficiency, and high power. The practice shows good efficiency in Liaohe Oilfield.
顺穿法一般在电动钻机上采用，主要考虑到电控操作提升系统比较平稳； 花穿法一般在机械钻机上使用，以受力平衡来缓解气控操作带来的冲击载荷的影响。
The sequent wire-pulling is used in electric powered rig as it has smooth lifting system and cross wire-pulling is used in mechanical rig as balanced force relief impact force by compressed ai.
本文在采用自平衡法静载荷试验的基础上，分别对浙江嘉兴和湖州两个工程中的同一场地挤扩支盘灌注桩与普通直孔灌注桩进行对比试验研究。
To study vertical bearing behavior of the foundation, a shaft diaphragm wall foundation of bridge in loess area was tested for bearing capacity by use of the self-balanced method.
合理地布置平衡重的位置以使主轴承载荷的最大值达到最小，这是平衡重设计的又一问题。
The reasonable disposition of the crankshaft counterweight can minimize the maximum load on the main bearing, it is another problem of the design of the counterweight.
合理地布置平衡重的位置以使主轴承载荷的最大值达到最小，这是平衡重设计的又一问题。
The reasonable disposition of the crankshaft counterweight can minimize the maximum load on the main bearing, it is another problem of the design of the counterweight.
应用推荐