高迪首创了抛物线拱，其载荷分布完美。
Gaudi pioneered the parabolic arch, with its perfect distribution of load.
并对弯曲载荷分布规律进行了计算分析。
And the distribution law of bending loads is investigated and analyzed.
转速对切削齿上的载荷分布基本无影响。
The rotary speed has no effect on the working load on cutting teeth.
最后，应用函数逼近法获得载荷区内载荷分布方程。
Lastly, loading distributive equations were gained by the method of approximate function.
研究了游隙对单排四点接触球转盘轴承载荷分布的影响规律。
The influence law of clearance on load distribution of single row four-point contact ball slewing bearings is researched.
该应力可通过增加桥接长度减小，因载荷分布于钢板更长区域。
Such stress is reduced by increasing the bridging length, since the forces are distributed over a larger area of the plate.
从应力分布情况来看，前后联合内固定方式更加符合载荷分布原则。
From stress distribution, the anterior combined with posterior approach was corresponding with the principle of load-sharing.
结果表明：优化载荷分布的叶栅和原叶栅相比，总流动损失明显降低。
The test results have shown that the flow losses of cascades with optimized load distribution are significantly reduced in comparison with the original cascade.
提出了轴流通风机沿叶片叶高的载荷分布，按五次方流型设计的方法。
Load distribution of axial fan along to the blade and blade height is put forward according to dynamic design method of quintic equation.
注意到了列车轴向载荷的影响以及由于支撑轨道的刚性引起的载荷分布。
The effect of axial load series of train and the distribution of load by the rigidity of track of support is noticed.
优化结果较好地改善了悬置螺母的载荷分布状况，显示出良好的应用前景。
The results of optimization has improved the states of the load distribution of tension nut and opened up fine prospects for engineering applications.
因为标高决定了各轴承的载荷分布，从而直接影响转子轴承油膜的稳定性。
Because the loading distribution of each bearing are decided by the height mark, which will affect the stability of the bearing.
本文从弹流角度分析了修形前后线载荷分布及最大压力沿接触线的变化规律。
In this paper, the varying rules of the linear load distribution and the largest stress along the contacting lines are analyzed based on the EHL theory.
本文给出了在跨音速流动中，计算三维机翼非定常载荷分布的核函数法和计算结果。
A kernel function method and the results of computing unsteady load on three-dimensional wings in transonic flow are presented in this paper.
钢环组是金属带的关键组件之一，它的载荷分布关系到金属带的承载能力和使用寿命。
Steel ring is a key part of metal V-belt; the load distribution on its has a great influence on its driving capacity and its service life.
分析得到轴向载荷分布关系和预紧力一扭矩关系曲线，计算得到的扭矩系数合理准确。
The distribution curve of axial load and preload-torque is obtained, and the computed torque coefficient is reasonable and accurate.
分析了使用在平面磨床上的圆柱滚子结构、载荷分布、选用原则、使用范围及注意事项。
The structure property, load distribution, selection principle, application scope and points for attention of cylindrical roller bearing used on surface-grinding machine were analyzed.
通过建立齿面坐标系及相应的坐标转换阵，使用了一种能准确计算齿轮载荷分布的方法。
Through the coordinate systems of gear profile and the corresponding matrices of coordinate transformation, the load distribution of external or internal helical gears can be exactly determined.
本文提供了亚音速升力面理论的一种新解法，可求解亚音速流中有限翼展机翼的载荷分布。
A new method based on lifting-surface theory is presented determining the load distributions on finite wings in subsonic flows.
然后，以两套具有不同几何参数及外部载荷的轴承为例，利用静力模型计算了轴承的载荷分布。
Then, two bearings having different geometrical parameters and external loads are used as cases, the loads distributions are computed by using the statics model.
从改进气动载荷分布和边界层特性着手，研制一套可供叶栅优化设计与改型的计算方法与程序。
A set of numerical calculation methods and correspondent software are developed for the optimized design of turbo cascade profiles.
研究了采煤机滚筒截煤时所受的载荷分布情况，提出了用于煤机零部件强度校核的载荷计算方法。
The paper studies load distribution status on shearer cutting drum while it works, puts forward load calculation method used for strength verification of parts of mining machine.
通过对轧机油膜轴承锥套载荷分布的模拟实验研究，给出了轧机油膜轴承锥套载荷测试的新方法。
An new experimental method of measuring load has been developed for oil film bearing on strip rolling mill.
论文包括四部分：紊流风场模型、风力机载荷分析、风力机叶片载荷分布、风力机叶片可靠性分析。
The paper includes four parts: turbulence wind field model, the load of the wind turbine, the load distribution of wind turbine blade, the wind turbine reliability analysis.
对啮合偏移和周节累积误差分别和共同对轮齿载荷分布的影响进行了分析，并将分析结果进行了比较。
This paper has analysed load distribution of gear ring which is affected engaged deviation and cumulative pitch error, and comparing three analysis results.
通过优化找到了一种合理结构，此结构能够使螺母螺牙载荷分布较为合理，减小最薄弱部分承受的载荷。
Then a reasonable structure is obtained. The loading of the screw thread in this structure is reasonable and the loading at the most dangerous place is decre…
在船舶发生碰撞和搁浅后，一方而是船体结构承载能力的削弱；另一方面是船舶浮态和外载荷分布的的著变化。
After collision and grounding, the load - bearing capacity of a ship hull is weakened while the floating condition and the external load distribution of the ship may change dramatically.
另外，对叉型叶根，文中提出了一种简化的接触模型，并根据计算结果给出更合理的销钉孔载荷分布拟合公式。
Furthermore, as for the fork blade roots, a simplified contact model is put forward and according to the calculation results, a more reasonable pin-hole load distribution model is given in this paper.
按照上面所获得的载荷分布规律，把载荷施加在有限元模型上，利用ANSYS计算，得到了应力的分布规律。
On the bases of pressure distribution, applied the load on the element, after a large number of computer runs by using ANSYS, obtained the stress distribution on the worm and worm gear.
按照上面所获得的载荷分布规律，把载荷施加在有限元模型上，利用ANSYS计算，得到了应力的分布规律。
On the bases of pressure distribution, applied the load on the element, after a large number of computer runs by using ANSYS, obtained the stress distribution on the worm and worm gear.
应用推荐