结果清楚地显示，深承台板的载荷传递机制与相应的双向剪切破坏模式。
The results clearly illustrate the load transfer mechanism in the deep pile cap and the subsequent failure mode of two-way shear.
基于临界边界单元法，研究温度场中具有蠕变效应的冻土接触载荷传递问题。
The problem of transmission of loaded contact frozen soil with creep effect in the temperature field is studied using critical boundary element method.
人和猕猴膝关节发生扭转和拉伸损伤时的平均载荷传递比分别为8．6和1．3。
The mean load transfer ratios between human and rhesus monkey knee joints are 8.6 and 1.3 for torsional and tensional injuries respectively.
建立一个理论模型来模拟致动器和母体之间的动态载荷传递以及产生的弹性波传播。
A theoretical model is developed to simulate the dynamic load transfer between the actuators and the host medium and the resulting elastic wave propagation.
主轴的功能是支撑叶轮，将扭矩载荷传递给齿轮箱，而将其它载荷传递给底座等支撑结构。
Spindle's function is to support the impeller, transmit the torque load to the gear box and other loads to the base and other supporting structures.
铁素体迅速应变硬化和铁素体到马氏体的载荷传递使双相钢具有较高的初始应变硬化速率和较高的强度。
The higher initial strain hardening rate and higher strength of dual phase are attributed to rapid strain hardening in ferrite and the load transfer from the ferrite to martensite.
在分析单桩的载荷传递机理、单桩的破坏模式的基础上，重点探讨了单桩沉降的载荷传递法和剪切变形法。
On the basis of load transfer mechanism and destruction patterns of single pile, load transfer method and shearing deformation method for subsidence computing of single pile are mainly discussed.
实验结果表明：人体和猕猴肘关节在发生扭转和弯曲损伤时所承受的平均载荷传递比分别为3．65和4．28。
The results show that the mean load transfer ratios between human and rhesus monkey elbow joints were 3.65 and 4.28 for torsional and bending injury respectively.
提出了载荷传递因子的概念，给出了卸荷拱高度的计算公式和载荷传递因子的计算公式，解决了关键块上的载荷计算问题。
Based on that, the formulae of lithology factor and time factor of load transmitting were established. By means of these formulae, the problem of load calculation for roof key block can be solved.
井下使用的机械装置，用于向另一个井下部件传递一种冲击载荷，尤其当该部件被卡住时。
A mechanical device used downhole to deliver an impact load to another downhole component, especially when that component is stuck.
该系统可完成有关过盈配合的最小配合面压强、传递载荷所需的最小过盈量等参数的计算，为过盈配合的设计与计算提供了一个高效的工具。
The minimum fitting pressure and tightness using to transfer load can be easily calculated. It provides an efficiency tool for tight fitting's design and calculating.
根据本文所建立的谐波齿轮传动运动传递模型，对空载和载荷下啮合情况进行了研究。
At last, based on motion transmission, the state of meshing in no load and load condition is studied.
传递函数法是动态载荷识别的一种方法。
The transfer function method is a method of dynamic load identification.
通过温州软土地基中超长钻孔灌注桩静载荷试验和桩身轴力的测试，探讨了软土地基中超长钻孔灌注桩的承载力性状和荷载传递机理。
In this article, the bearing capacity behavior and load transfer mechanism of super long bored pile in Wenzhou soft clay are discussed, on the basis of the static loading test and axial force test.
通过载荷试验证明，挤扩支盘桩由于桩身不同位置设置了多个支或盘，使其荷载传递性状发生了根本的改变，因而它的承载力及沉降等方面也发生了变化。
It is proved by loading test that the loading transfer behavior of squeezed branch piles has changed because at different places of the pile body are located many branches or disks.
根据单桩静载荷试验的结果，全面系统地分析了挤扩支盘桩的承载机理、荷载传递性状和FEM模拟结果。
Bearing mechanism, loading transfer behavior and results of FEM simulation of squeezed branch pile are analyzed systematically in this paper based on results of static loading test.
根据输电线路钢管杆的受力特点，将钢管杆简化成受复杂载荷作用的变截面梁的纵横弯曲和扭转问题，并采用传递矩阵方法进行分析求解。
Based on the stress performance of steel pole of transmission line, the steel pole is simplified as a matter of cross bending and torque with variable sections and complex loads.
这些载荷通过立管传递到井口和套管，在连接和焊接处形成临界疲劳区。
These loads are transferred through the riser to the well - head and casing system, causing fatigue at critical connectors and welds.
计算结果表明，在进行复合地基载荷试验时，载荷板下的垫层厚度及变形模量会对复合地基的荷载传递特性以及沉降产生影响。
The numerical calculation show that load transfer and settlement of composite groundsill is affected by the thickness and modula of soil layer .
它主要用来支承传动零部件，传递扭矩和承受载荷。
It is mainly used to support transmission parts, transmission torque and load to bear.
摘要作为汽车的主要承载件和传力件驱动桥壳承受了载货汽车满载时的大部分载荷而且还承受由驱动车轮传递过来的驱动力、制动力、侧向力等并经过悬架系统传递给车架和车身。
Abstract as the mainly carrying and passing components of the vehicle, the automobile drive axle housing supports the weight of vehicle, and transfer the weight to the wheel.
在飞机结构中，机械连接是传递力学载荷的主要方式。
Mechanical joint provide the primary means for transferring load among components in the construction of aircraft structures.
根据静载荷试验结果，研究褥垫层厚度对荷载在水泥土搅拌桩四桩复合地基中传递的影响规律。
The load transfer mechanism of cement-soil pile composite foundations with different cushion heights were studied according to the results of static loading tests.
而转向架是车辆系统的主要组成部分之一，它传递各种载荷，并利用轮轨间的黏着保持牵引力的产生。
And the bogie is one of the major components of a vehicle, it transfer every kind of forces, and produce tractive force using adhesion force between wheel and rail.
辅助夹具有效地传递了压缩载荷和扭转载荷，并保持力和力矩中心线在试验过程中始终不变。
The compressive load and torque were transferred effectively. The Central Line of the force and torque...
辅助夹具有效地传递了压缩载荷和扭转载荷，并保持力和力矩中心线在试验过程中始终不变。
The compressive load and torque were transferred effectively. The Central Line of the force and torque...
应用推荐