用载荷传感器验证载荷控制。
载荷传感器精度满足或超过ASTME4标准。
The accuracy of the load cell meets or exceeds ASTM E4 standard.
载荷传感器包括用于可释放地接收电缆的互补插头的连接器，例如插口。
The load sensors include connectors, such as jacks, for releasably receiving a complementary plug of a cable.
当处于称重位置时，压力构件被直接连接到地面，使得载荷传感器的载荷元件承受平台的载荷。
In a weighing position, the pressure member is coupled directly to the ground, such that the load cell of the load sensor bears the load of the platform.
主载荷传感器将由它本身和从载荷传感器提供的重量数据加在一起，用以提供组合的重量结果数据。
The master load sensor sums the weight data provided by itself and the slave load sensors, for providing combined weight result data.
其中一个载荷传感器可以是用于接收被称作从载荷传感器的其它载荷传感器的重量数据的主载荷传感器。
One of the load sensors can be a master load sensor for receiving weight data of the other load sensors, referred to as slave load sensors.
介绍支承在载荷传感器上的大直径大负荷筒仓支座的一种设计计算方法，并给出了一个工程实例的设计计算结果。
Design calculation method for lug of large diameter and heavy load silo which mount on sensor cell has been introduced, and calculation results of a real engineering has been showed.
针对传感器弹性体的重要性，本文应用有限元分析软件ANSYS对二维轴承载荷传感器弹性体进行了结构优化设计。
Aiming at the importance of the elastomer, based on the ANSYS, the thesis has realized the structure optimization design of the elastomer of two-dimensional bearing load cell.
称重器还包括用于携带该称重器的各个模块的刚性箱，当被打开并且被载荷传感器支撑在一表面之上时，所述箱适于用作称重平台。
The scale also includes a rigid case for carrying the various modules of the scale, the case being adapted for use as a weighing platform when opened and supported by the load sensors over a surface.
ASIP是一个用于U - 2侦察机和“全球鹰”无人机的信号情报传感器载荷，由诺斯罗普·格鲁曼公司任务系统分部的电磁系统实验室商业部门开发。
ASIP is a signals intelligence sensor payload developed by Northrop Grumman Mission Systems sector's Electromagnetic Systems Laboratory business unit for use on both the U-2 and Global Hawk.
美军将对无人机的传感器载荷和电子设备进行调整以便对不同类型的人员进行扫描。
Sensor payloads and electronics will be adjusted to scan different kinds of terrain.
测试该机的有效载荷包括光电吊舱，红外传感器，及位于康瑞埃军营的通过无线电和卫星实时联系的地面站。
The payload on the test Patroller includes an optronics pod, infrared sensors, and a real-time link through radio and satellite channels to the ground station at the Canjuers Army camp.
AAI公司和CERDEC中心正考虑将多种有效载荷集成到无人机上，包括信号情报、传感器和通信系统。
Many payload varieties are being considered for integration, including signals intelligence, sensor and communications.
冲击过程中的接触载荷由压力传感器及数字信号处理系统实时测量。
The contact force during impact process was measured by force sensor and data signal processing system in real time.
通过计算机控制，加力机构可以对微小试件按力或位移控制方式加载，载荷大小通过传感器直接由计算机数字化。
The loading frame can work in either load-control or displacement-control mode, and signals from the load sensor are digitalized with the control computer.
智能夹层中光纤法珀腔传感器的应变与载荷之间具有良好的线性关系。
The experimental results present that the strain of optic fiber Fabry-Perot sensor is better linear with loading of bending beam.
通过对捷达轿车的道路试验，研究了汽车行驶速度、载荷及轮胎气压对轮速传感器脉冲数相对差值的影响。
Through the road test on JETTA passenger car, research the effect of the vehicle velocity, load and tire pressure on the relative difference of pulse counts of wheel sensors.
采用车辆板弹簧作为称重传感器的弹性体检测车辆载荷时，板弹簧的迟滞严重影响了载荷检测的精度。
When vehicle leaf springs are used as elastic body of the weighing transducer to measure vehicle load, the measuring precision is severely influenced by the hysteresis of leaf springs.
传感器上的载荷信号输送到发射机经天线发送到接收机，输出扭矩数值。
A load signal on the sensor is transmitted to the transmitter and then is sent to the receiver through the antenna so that the torsion value is outputted.
此时，压电陶瓷PZT的探针是抵在传感器膜片的中心点处，如果使用均布载荷模型进行计算和分析，将会产生较大的误差。
Then, PZT piezoelectric ceramics sensor's probe is contact with the center of diaphragm, if we use the uniform load model to calculate and analyze, it will cause error in micro displacement detection.
动力钳和自动旋紧管箍机的载荷压力传感器：设计用在动力钳或钻杆的组装和拆卸应用中。
Power Tongs and Torque Turns Load Cells: Designed for use in power tongs or drill pipe make-up and break-out applications.
通过瞬态响应特性分析，得到传感器在承受实际的油膜载荷作用下的响应特性。
And with transient response analyse, the sensor's response under the actual oil film pressure was obtained.
讨论了该弹性元件的力学参数与传感器性能指标间的关系及其偏心载荷问题。
The relationship between elastic element mechanical parameters and load cell performance character, as well as problems regarding eccentric load, are also discussed.
本实用新型是一种测量液压缸行程及其载荷的传感器，适用于测量液压缸的当前行程及载荷值。
The utility model is a sensor for measuring the strokes and the load of the hydraulic cylinder and is suitable for measuring the current stroke and the load of the hydraulic cylinder.
本实用新型是一种测量液压缸行程及其载荷的传感器，适用于测量液压缸的当前行程及载荷值。
The utility model is a sensor for measuring the strokes and the load of the hydraulic cylinder and is suitable for measuring the current stroke and the load of the hydraulic cylinder.
应用推荐