那金属轴叫凸轮轴，翣在发动机里的每个气门一般有各自的凸轮。
The metal shaft, called the camshaft, typically has individual cams for each valve in the engine.
来自行星齿轮轴的功率通过行星齿轮，只到达一个半轴齿轮，而另一个半轴齿轮保持静止。
Power will go from the pinion shaft through the differential pinions to only one side gear because the other side gear is stationary.
那金属轴叫凸轮轴，在发动机里的每个气门一般有各自的凸轮。
The metal shaft, called the camshaft, typically has individual cams for each valve in the engine.
机轮轴承的断裂和高能中断起飞通常都是由于轴上产生了局部的高热量。
Wheel bearing fractures or high-energy refused takeoffs often result in high local heat on an axle.
轮轴承断裂造成轴的热损伤可能会导致这类情况。
Axle heat damage caused by a wheel bearing fracture may lead to such a condition.
这样外侧车轮轴上的半轴齿轮比内侧车轮轴上的半轴齿轮转动更快。
Thus, the side gear on the outer-wheel axle turns more rapidly than the side gear on the inner-wheel axle.
密封空气被注入到主马达轴（顶部和下部）和驱动马达的齿轮轴的迷宫式密封里。
Seal air is injected into the labyrinth seals located at the main motor shaft (top and bottom) and at the pinion shaft driving the motor.
某发动机用GH4169合金涡轮轴转动锻件由轴部和盘部两部分组成，考虑采用两步锻造法进行生产。
A two-step forging approach was taken in the production of GH4169 turboshaft of an engine, which was an integration of a disk and a shaft.
主动车轮轴是钢坯运输车的关键零部件，采用结构有限元分析软件ANSYS分析了该轴的应力和变形。
The driving wheel's axle is a key parts of the billet transport vehicle, so the axle's stress and deformation were analysed by the structure finite element analysis software ANSYS.
这种自锁性能只能是手柄带动着齿轮轴的转动及齿条轴的移动，而不能是齿条轴带动着齿轮轴的转动。
This performance can only be handle driving a gear shaft to rotate and rack shaft to move, but not gear shaft drive gear shaft to rotate.
在发动机里，机油被供应到旋转在其支承轴内的曲轴和凸轮轴轴颈上。
In the engine, oil is supplied to crankshaft and camshaft journals rotating in their supporting bearings.
中空装配式凸轮轴的技术关键为凸轮和轴体之间的连接。
The key technology of hollow assembled camshaft is joint between the shaft and the cam lobes.
功率经过主动齿轮、从动锥齿轮、壳体和行星齿轮轴来到行星齿轮，然后功率被均分，送到半轴齿轮、半轴，最后到达驱动轮。
Power flows through the drive pinion, ring gear, case, and pinion shaft to the differential pinions. Then power splits equally and goes to the side gears, axle shafts, and drive wheels.
气门摇臂，摇臂轴，摇臂总成，气门导管，凸轮轴盖。
Rocker arm, Rocker arm shaft, Rocker assembly, Valve guide tube, Camshaft bearing Cap.
在小齿轮轴轴轭处拆卸万向节扣夹螺栓。
Remove the universal joint strap bolts at the pinion shaft yoke.
轴承径向和轴向的承载能力都比较大，各配件可替换性强。轴承通过调节偏心外六角来调整芯轴位置进而达到调整侧滚轮轴向尺寸的目的。
With greater axial and radial load rating capacity, good replaceability of components. The shaft can be adjusted through external hexogan then to adjust the axial part dimension.
通过装在轮轴和车桥之间的驱动轴，两端的车轮可以转动。
The wheels swivel on each end via a pivot arrangement between the axle and the wheel spindle.
带整体齿轮的高速轴和带套筒轴承的平衡惰轮轴确保降低机组震动并延长密封寿命。
High speed shaft with integral gear and balanced idler shaft with sleeved bearings to insure a low vibration unit and extended seal life.
本发明涉及一种动力传动装置（1.1），包含一个输入轴（2）连接到一个热机（3）和一个输出轴（4）连接到轮轴（5）。
The invention relates to a power transmission device (1.1) that comprises an input shaft (2) to be connected to a thermal engine (3) and an output shaft (4) to be connected to a wheel shaft (5).
按齿轮轴线的相对位置分平行轴圆柱齿轮传动、相交轴圆锥齿轮传动和交错轴螺旋齿轮传动。
According to the relative position of sub-gear axis parallel shaft spur gear drive, bevel gear drive shaft and intersecting cross-axis helical gears.
与主动后轮同一轮轴的从动后轮，其可呈空转状态，该轮轴并连接于底盘后端下方，而可前、后幌动移动；
The wheel shaft is connected at the lower side of the rear end of the car body, and can swing and move front and back.
从轴管里的后小齿轮轴承盖孔拆卸限深垫片。 记录限深垫片厚度。
Remove the depth shims from rear pinion bearing cup bore in axle housinRecord the thickness of the depth shims.
适合于电机、汽车、传动轴、齿轮轴等。
It is applied on motors, motorcars, transmission shaft, gear axle and so on.
3减速机为垂直轴形式，第一级输入轴为伞齿轮轴，在伞齿轮支承轴承处过渡轴肩处出现较严重的应力集中而发生疲劳破坏。
3 the reducer is in the form of vertical shaft, the first input shaft is the bevel gear shaft, and the more serious stress concentration occurs at the transition shaft of the bevel gear bearing.
在排肥籽轴上和地轮轴架上安装地轮轴地轮。
The fertilizer seed discharging shaft and the land wheel axel frame are provided with a land wheel axel land wheel.
在排肥籽轴上和地轮轴架上安装地轮轴地轮。
The fertilizer seed discharging shaft and the land wheel axel frame are provided with a land wheel axel land wheel.
应用推荐