在这些轴承中，有轴角编码器，它们感受到了外面的框的转动，来保持这个东西，指向相同的方向。
And in these bearings here are shaft encoders, and they sense that the rotation that the outer housing makes in order to keep this thing pointing at the same direction.
随着飞行器的临近，y轴角增长的越来越快且当y向的角度达到90度时（即将超越），突然它急转弯朝南飞去。
As the aircraft comes closer the Y angle increases more rapidly and just as the aircraft reaches an Y of 90 degrees (exactly overhead), it makes a sharp turn due south.
利用轴角-数字转换芯片a和旋转变压器，可以组成高精度的多通道测角系统。
Using the resolver - to - digital converter a a multi channel Angle measuring system.
基于多极旋转变压器轴角粗、精组合的原理，提出了一种工程实用的多极旋转变压器轴角—数字转换系统精度的测试方法。
Based on the principle of combination of coarse and fine axis Angle, this paper presented an engineering practical accuracy test method of multi_pole resolver to digital conversion system.
介绍一种光电跟踪系统所采用的轴角编码与数字显示器。
The shaft angle encoding and digital display of an optoelectronic tracking system is introduced in the paper.
介绍旋变及同步机轴角编码器的典型电路设计与调试。
The paper introduces the design and adjustment of resolver and synchronizer axial angle encoder.
为了防止突然断电时造成数据错误，增量式光电轴角编码器通常采用零位光栅提供绝对零位信号。
Incremental optical electric axial Angle encoder usually adopts zero position grating providing absolute zero position in order to prevent from data fault during electricity failure suddenly.
本论文提出微型永磁同步电动机驱动系统的强健控制器设计及其转轴角度估测器。
This dissertation proposes a robust controller design and a position estimator for micro permanent magnet synchronous motor drive systems.
该轴角同步器驱动软件已应用于某装备综合自动测试系统。
The drive software of the shaft angle synchro converter has been applied in a weapon automatic testing system.
文章介绍了双通道旋转变压器型轴角编码组件的研制，并且给出具体设计步骤。
The research and the detailed process of design for the two-speed resolver shaft encoder is introduced in this paper.
介绍了一种针对单圈绝对式光电轴角编码器而设计的基于PCI总线的实时数据采集系统。
A real-time data acquisition system based on PCI Bus was introduced. The system was designed for single-ring absolute optical shaft encoder.
在介绍集成轴角变换器的工作原理后，详细介绍了用于控制力矩陀螺速率控制系统中的测角系统。
In this paper, the Angle measuring system using in Single Gimbal Control Moment Gyroscope (SGCMG) is discussed after introducing the basic theory of resolver-to-angle converter.
运用双速轴角转换原理中的数据组合与数据纠错原理，基于轴角转换芯片rd- 19230，研究一种新型的双速处理器。
Exerting data combination and data correct theory of two-speed shaft Angle converter, it researches a new type two-speed processor based on shaft Angle conversion monolithic of RD-19230.
介绍一种针对正、余弦旋转变压器数字转换器（RDC）模块，用复杂可编程逻辑器件（CPLD）技术实现伺服轴角编码电路设计的方案。
This paper introduces the technology scheme to design radar servo shaft encoder circuit by using CPLD on the rotary transformer and RDC module.
光电轴角编码器，又称光电角位置传感器，是一种集光、机、电为一体的数字测角装置。
Photoelectric rotary encoder, which is also called photoelectric angel position sensor, is a kind of digital angle measuring device combining optics, mechanics and electronics.
光电增量式轴角编码器的输出信号由于其编码原理而在慢速或停止时易受轴抖动影响。
Owing to the encoding principle, the outputs of the Photo incremental Rotary Encoder suffer from disorder when its shaft vibrates, especially when rotating slowly or halting.
阐述了24位光电轴角编码器的结构、工作原理、硬件电路设计处理过程和软件编程特点。
In this paper the structure, operating principle, the design of hardware circuit and the feature software of the 24-bit photoelectric shaft encoder are expounded systematically.
所设计的控制器可以实现两个刚体的角速度运动达到关于惯性主轴角速度的部分同步。
The proposed controllers can achieve partial synchronization for the angular velocity with respect to the principal axes of inertia between angular velocity motions of the two rigid bodies discussed.
光电轴角编码器是一种应用广泛的光电角位置传感器。
The optical electric axial Angle encoder is a kind of widely used optical electric sensor for Angle detecting.
利用轴角-数字转换芯片AD2S82A和旋转变压器，可以组成高精度的多通道测角系统。
Using the resolver-to-digital converter AD2S82A, designed a multi channel angle measuring system.
利用轴角-数字转换芯片AD2S82A和旋转变压器，可以组成高精度的多通道测角系统。
Using the resolver-to-digital converter AD2S82A, design a multi channel angle measuring system.
本文介绍了光电轴角编码器光学、机械结构及原理；码盘设计及各码道功能；
The optical and mechanical structure and principles of photoelectrical angle encoder areintroduced, furthermore, the design of code disk and the function of every code track are pre-sented.
从理论和实践两个方面较为系统地阐述了旋转变压器峰值采样正余切轴角编码方案及其工程设计原理。
From two aspects of theory and practice, this article more systematically expounded the peak sample transformer rotating shaft cotangent coding scheme and its engineering design principles.
光电轴角编码器中的莫尔条纹信号质量决定了整个系统的细分精度。
The signal quality of Moire fringe in photoelectric shaft encoder determines the subdivision accuracy of the whole system.
就耦合效率随半导体激光器对光轴的偏离和对光轴角度的偏转进行了研究，发现耦合效率的变化灵敏度不高；
We studied how the coupling efficiency changes with the fiber position displacement and fiber axial angle variation, and we found that the coupling efficiency is not sensitive to the two parameters.
本文基于高精度绝对式光电轴角编码器，提出采用二阶跟踪微分处理的方法，以准确测量发射车起竖臂工作过程中的角加速度。
The reason of the error in axle-angle position coder for precision tracking and instrumentation radar is analyzed in this paper, and the concrete measures of controlling the error are also proposed.
本文基于高精度绝对式光电轴角编码器，提出采用二阶跟踪微分处理的方法，以准确测量发射车起竖臂工作过程中的角加速度。
The reason of the error in axle-angle position coder for precision tracking and instrumentation radar is analyzed in this paper, and the concrete measures of controlling the error are also proposed.
应用推荐