转子轴支承为双列调心滚子轴承。
Rotor shafts are supported on double-row radial spherical roller bearing.
在传动轴启动和停转的过程中,软支承的摆架会有非常明显的振动,硬支承的摆架则没有这种现象。
During the start and stop of the drive shaft, the swing frame of the soft support will have a very obvious vibration.
在冷热两种状念下进行了轴系合理校中计算,并确定中间轴临时支承的位置、法兰间偏移与曲折值各安装工艺参数。
Rational aligning calculation of propulsion shafting in cold and warm conditions, and confirm several fitting technics parameters include of temporary supports, sags and gaps between flanges.
对于传动轴平衡机来说,硬支承所能达到的精度也远远超出了实际需要。
For the drive shaft balancing machine, the hard bearing can achieve the accuracy is far beyond the actual needs.
可以使用加大芯轴的尺寸,允许同时起到支承簧圈的作用。
Can be used to increase the size of the core shaft, allowing to play the role of the support spring.
给出了带集中质量和弹性支承阶梯轴的横向固有振动分析方法。
This paper presents an analytic method for lateral natural vibration of step beams with lumped masses and elastic supports.
托架支承在导轴上。
该软件包含有三大功能模块:系统隔振性能分析模块、支承参数灵敏度分析模块和主惯性轴分析模块。
It has three functions, such as vibrate-isolation performance analysis, bearing parameters sensibility analysis, principal inertia axis analysis.
轴,支承转动零件并与之一起回转以传递运动、扭矩或弯矩的机械零件。
The axis, the supporting rotation components and rotates together with it transmits the movement, the torque or the bending moment machine parts.
对船舶轴系进行冲击响应计算,通常在轴架支承处采用弹性边界处理,取一个近似的支承静刚度。
The support brackets are simulated by springs when calculating shock response of a ship shaft system, and the stiffness of spring usually takes an approximate value.
摇臂围绕支承轴旋转,气门与摇臂相对应的一端压下。
The rocker arm pivots around its supporting shaft so that the valve end of the rocker arm is forced downward.
为了降低刚性车轮产生的振动,在车轮和支承轴之间设计了由金属橡胶构成的减振器。
To reduce vibration from rigid wheels, a vibration absorber made of mental rubber is designed for each shaft of the wheels.
对于推力轴承,与轴紧配合并一起运动的称轴圈,与轴承座或机械壳体孔成过渡配合并起支承作用的称座圈。
For thrust bearings, and shaft tight and together with the movement of said shaft washer, and bearing or mechanical shell holes into the transition and play supporting role with the said seat.
在发动机里,机油被供应到旋转在其支承轴内的曲轴和凸轮轴轴颈上。
In the engine, oil is supplied to crankshaft and camshaft journals rotating in their supporting bearings.
主要在弹性支承连续梁临界轴力求解方法的基础上。提出自锚式悬索桥主梁临界轴力的实用简化计算方法。
Based on the method of calculating the elastic support continuous beam bridge's steady, a practical and simplified method is provided to analyze girder's stability in plane.
新型高精度框架支承系统经受了恶劣环境条件的考验,已成功地应用于四轴稳定平台。
This system has experienced the severe environment condition and has been used successfully in four-axis stable platform system.
该马达外壳通过支承在其中的驱动轴法兰连接在变速箱外壳上。
The motor housing is flange-mounted, along with a drive shaft mounted therein, to the gear housing.
由于轴的几何形状及支承方式的复杂性,转轴临界转速计算中的许多问题,是困难的问题。
Because of the complexities in geometric forms of the axle and the supporting Patterns, most of the calculations of the critical speed of turning axle are difficult.
耳轴组件的支承是每根臂末端的空气轴承,轴承上的闸瓦起定位作用。
The trunnion assembly is supported by air bearings at the end of each arm and is held in position by brake shoes at each bearings.
笔者根据汽车传动轴的布置形式,对传动轴的中间支承和变速器输出轴的受力特性给予分析。
He illustrates that torque on intermediate support and transmission output shaft is related to the arrangement of intermediate support, and measures to keep them in good condition.
通过数值仿真和实验研究远轴端eord支承的单盘柔性转子系统的不平衡响应。
Numerical simulations and experimental investigates were carried out for unbalance response of a single disk flexible rotor system with far shaft end mounted on EORD.
两段传动轴之间有一个中间支承轴承,并由万向节连接。
The two-section propeller is supported by a center bearing and coupled together by universal joints.
本文把随轴一起振动的转子惯性力及支承反力,看成是作用在轴上的外力。
The inertial force and supporting reaction force created by the vibration of rotors with axle are regarded as external forces on the axle in this paper.
支承旋转或往复运动的轴的支承件叫轴承。
Supports provided to locate revolving or reciprocating shaft.
分析落轴冲击对轨道结构产生的动态响应,比较弹性支承块及短轨枕埋入式整体道床轨道结构的动力性能,并用现场实测数据进行验证。
The track dynamic characteristic, which is verified by the on-the-spot experiment, is compared between the Low Vibration Track(LVT) and the short sleeper buried ballastless track.
轴系由轴本身、联轴器、安装在轴上的传动件、紧固件等各种零件以及轴的支承组成。
Axis system is made up of axis itself, transmission part installed on axis, connecting part and support of axis.
滚动轴承作为轴的支点用来支承轴及轴上零件,通常的轴都有两支点。
Bearing for pivot of the axis is used as a supporting shaft and parts on the shaft, the shaft usually has two poims.
一种悬挂式传动轴中间支承结构,属于汽车及工程机械传动构件。
A suspended drive shaft intermediate bearing structure pertains to an automobile and engineering mechanical transmission component.
这种夹具可支承固定在这种太阳能吸收器的支承结构上的两根耳轴,吊耳设置在支承结构的顶端。
The fixture supports two trunnion shafts attached to the support structure of the receiver Lifting lugs would be located on the top end of the support structure.
这种夹具可支承固定在这种太阳能吸收器的支承结构上的两根耳轴,吊耳设置在支承结构的顶端。
The fixture supports two trunnion shafts attached to the support structure of the receiver Lifting lugs would be located on the top end of the support structure.
应用推荐