FAG单列角接触球轴承72b和73 B系列有一个40度的接触角，因此它们能够提供较高的径向载荷。
FAG single row angular contact ball bearings of series 72b and 73b have a contact Angle of 40. They can therefore accomodate high axial loads.
圆锥滚子轴承适用于径向和推力，但也接受联合载荷和倾斜力矩。
Taper roller bearings are suitable for both radial and thrust forces but also accept combined loads and tilting moments.
径向力：与轴承的轴线所垂直的载荷；它和轴向力是影响轴承设计和应用的两个力。
RADIAL FORCE : The load on a bearing perpendicular to the axle, this and the Thrust load are forces that affect the design and application of bearings.
机床用圆锥滚子轴承可同时承受径向和轴向载荷，双列圆锥滚子轴承可承受双向轴向载荷。
Tapered roller bearings for machine tools can be both radial and axial loads, double row tapered roller bearings can withstand two-way axial load.
圆柱滚子和推力滚针组合轴承yrt系列具有旋转精度高、可承受较大的径向载荷和双向轴向载荷以及大的倾覆力矩等特点。
YRT series cylindrical roller and thrust needle roller combined bearings, with high rotation accuracy, can support heavier radial loads, double direction axial load and inclined torque, etc.
单列角接触球轴承能够提供径向和推力载荷。
Single row angular contact ball bearings can accommodate radial and thrust loads.
滑动轴承座由上盖、底座、剖分轴瓦(铝青铜)，安装螺栓组成，主要承受径向载荷。
Plain Bearing Block Housings are made up of cap, base, aluminum bronze bushing and installing bolts, which mainly bear radial load.
滑动轴承座由上盖、底座、剖分轴瓦(铝青铜)，安装螺栓组成，首要承受径向载荷。
Plain Bearing Block Housings are made up of cap, base, aluminum bronze bushing and installing bolts, which mainly bear radial load.
否则必须给轴承施加径向载荷，例如，通过提高皮带张力或空转扭矩，或采用其他手段。
If this is not the case, the bearing must be subjected to an additional radial load, e. G. by increasing belt tension or idling torque, or by other means.
四列圆锥滚子轴承其性能与双列圆锥滚子轴承基本相同，但可承受更大的径向载荷和双轴向载荷。
Four row circular cone roller bearings its performance and double row circular cone roller bearings basic same but may withstand the bigger radial direction load and the two axle to the load.
本文利用拟动力学法，同时考虑径向负荷、轴向负荷、自身离心力以及陀螺力矩作用的影响，建立了高速滚珠轴承载荷分布的分析模型。
Considering radial load, axial load, centrifugal force and gyroscopic moment acted on the ball bearing simultaneously, an analysis model based on quasi-dynamic method was set up in this paper.
深沟球轴承可承受径向，轴向，或复合载荷和由于设计简单，这种类型的轴承可以生产，以提供高准确度和运行的高速运行。
Deep Groove ball bearings can sustain radial, axial, or composite loads and because of simple design, this bearing type can be produced to provide both high-running accuracy and high-speed operation.
当有径向载荷作用时， 自主式轴承能抑制轴颈位移并因此使轴承获得无穷刚度。
When radial load is applied, the active bearing can surpress the displacement of the shaft, thus obtaining an infinite stiffness.
这类轴承没有填充槽，除径向载荷外，还能承受双向作用的轴向负荷，即使在高转速下也是如此。
Does not fill the tank of these bearings, in addition to radial loads, but also can withstand the axial load in both directions, even at high speeds as well.
如果不是这样，必须使对中滚针轴承承受额外的径向载荷。
If this is not the case, the alignment needle roller bearing must be subjected to an additional radial load.
结果表明，轮毂轴承径向外部载荷与轿车侧向加速度呈线性关系，轴向外部载荷与侧向加速度呈二次非线性关系。
The results show that the lateral acceleration and the radial CWEL plots as a straight line, but the lateral acceleration and the transverse CWEL in quadratic nonlinear correlation.
圆锥滚子轴承主要用以承受径向载荷为主的径向与轴向联合载荷。
Taper roller bearings are generally used to support combined load mainly consisting of radial load.
深沟球轴承属于不可分离型轴承，主要承受径向载荷，也可承受一定量的轴向载荷。
Deep groove ball bearing is inseparable bearing, mainly it can be subject to radial load and some axial load as well.
径向载荷的变化对轴承径向刚度的影响可以忽略。
The effect of radial load to radial stiffness can be neglected.
其次，由轴向定位预紧轴承受径向载荷时各滚子的变形，推导出轴承的径向刚度计算公式；
Second, the calculation formula of radial rigidity is deduced according to the deformation of rollers under the radial load with axial position preload.
四列圆锥滚子轴承其性能与双列圆锥滚子轴承基本相同，但可承受更大的径向载荷和双轴向载荷。
Four row circular cone roller bearings its performance and double row circular cone roller bearings basic same, but may withstand the bigger radial direction load and the two axle to the load.
调心滚子轴承主要用来承受径向载荷，同时也能承受一定的轴向负荷。
Spherical roller bearings are used to bear mainly the radial and also certain axial load.
深沟球轴承主要承受径向载荷，也可承受一定量的轴承载荷。
Deep groove ball bearings mainly take radial load as well as take moderate axial load.
本文阐述对轻载荷可倾瓦径向轴承的静态与动态性能的调查研究。
This paper describes the investigation into the static and dynamic performance of a tilting pad lightly loaded journal bearing.
静压轴承可以承受较大的径向载荷，可以使测量较大的轴承，扩大了检测的范围，减少了检测成本。
The hydrostatic bearings can bear larger radial load, can measure larger bearings, and can enlarge the detection range and lower the detection cost.
外圈是以轴承中心点为球心的球面， 向心球轴承具有自动调心性， 深沟球轴承滚动体与内、外圈滚道之间是线性接触， 外球面轴承能承受大的径向载荷。
The outer rig is sphere that based on the bearing's center, the rolling entity linearly come into touch with raceways of inner and outer ring, which can support greater radial loading.
径向载荷和轴向载荷对接触角的变化影响较大，直接关系到滚珠轴承的失效情况；
The radial and axial loads affect the ball contact angles relating to the bearing failure.
轴承主要用于承受以径向载荷为主的径向与轴向联合载荷。
Tapered roller bearings are generally used to support combined load mainly consisting of radial load.
单列角接触轴承背对背的配对形式，可承受两个方向的轴向载荷，同时可承受径向载荷。
Double row angular contact ball bearings are a form of back-to-back pairs of single row angular contact ball bearings, which support axial load in both directions as well as support radial load.
圆锥滚子轴承主要用以承受以径向载荷为主的径向与轴向联合载荷：外圈可分离，组装容易。
Tapered roller bearings are generally used to support combined load mainly consisting of radial load. Their cups are separable for easy assembling.
应用推荐