将爆炸衬砌简化为轴对称问题。
轴承中的热传导作为轴对称问题处理。
The heat conduction in rolling bearing can be treated as an axisymmetric problem.
进一步针对轴对称问题，引入等效应变和等效应力。
The effective strain and effective stress are introduced under the condition of axial symmetry.
研究应力杂交有限元方法，推导计算公式，将其应用在轴对称问题中。
Hybrid finite element method is analyzed and applied in the axisymmetric problem, of which the calculation equations are deduced.
利用边界层方法，讨论了第一主曲率为常数的组合旋转壳的轴对称问题。
By using the method of boundary layer, it discusses the axis symmetry problems of the combines rotary shell when its first curvature is in constant.
在考虑竖向附加力作用时，井壁结构的设计计算应按空间轴对称问题考虑。
The calculation made a design for shaft wall structure under vertical addition force should consider the problem of space axially symmetry.
采用坐标变换法导出了圆筒空间轴对称问题稳态热传导温度分布的关系式。
Using the variable transformation method, the formulae of the axial symmetrical wall temperature distribution during steady heat conduction of a hollow cylinder are derived in this paper.
利用已得到的三维轴对称问题的非局部弹性应力的解，采用级数近似展开的方法，求解环状裂纹的边值问题。
Solves the problem of boundary value on an annular crack by using the nonlocal stress solution of an axisymmetric crack problem and approximative method of series expansion.
根据层间完全接触的连续条件，由传递矩阵方法导出了多层压电压磁弹性材料空间轴对称问题的一般解析式。
By the use of the continuity conditions at the layer interfaces, the general solution formulation of multilayered axisymmetric space magneto-electro-elastic media is given.
基于强度折减法，将空间问题简化为平面轴对称问题，利用有限元方法对圆形基坑的稳定性问题进行了分析。
Based on strength reduction method, simplified the space problem as plane axisymmetric problem, the finite element method is used to evaluate the base stability of circular foundation pit.
本文运用增量理论和子结构方法在具体分析组合轴对称问题的基础上，提出了解决一般弹性接触问题的新方法。
Basing on the analysis of combined axial symmetry problem by the increment theory and substructure method, this paper presents a new method for solving the elastic contact problem in general.
本文用这种方法求解了含有一个球形空腔的圆轴在两端受拉时的解答，表明了以此法分析求解空间轴对称问题的可能性。
Based on these formulas, axi-symmetric problems in elasticity can be solved by the complex function technique. As an example, a spherical cavity in ar…
层状压电压磁弹性材料的空间轴对称问题：在柱坐标下，建立了横观各向同性压电压磁弹性材料空间轴对称问题的状态变量方程。
Axisymmetric problem: The state vector equation of transversely isotropic axisymmetric space magneto-electro-elastic media is established in a cylindrical coordinate system.
本工作是用作者提出的迎风格式计算轴对称喷管的定常超音流动问题的一个尝试。
This paper is on an application of the upwind difference scheme proposed by the author in a previous paper.
本文通过引入位移函数使得立方准晶的轴对称弹性问题化为求解一高阶偏微分方程。
Axisymmetric elasticity problem of cubic quasicrystal is reduced to a solution of a partial differential equation with higher-order by introducing displacement function.
本文从有限弹性理论出发对超弹性薄膜轴对称大变形问题进行了一般的数学描述。
In this paper, the problem of large axisymmetric deformation of hyperelastic membrane is reformulated on the basis of the general theory of finite elasticity.
对轴对称稳态热传导问题的弥散逼近数值解作了初步研究。
We have made initial researches on the diffuse approximate solution for stable axisymmetric heat transfer problems.
因此对它的求解，要较相应另攻角轴对称绕流的二点边值问题简便。
Therefore, the solutions can be obtained more easily than that of two point boundary value problems of axisymmetric flow case.
对有限长立井井壁在任意轴对称的法向、切向以及端面荷载的共同作用下的变形问题作了分析研究。
The problems of deformation for shaft lining are investigated under arbitrary axisymmetric normal loads and tangential loads with end loads.
板材成形中同样存在着计算坯料尺寸的问题，如弯曲件展开尺寸的计算，轴对称拉深件坯料尺寸的确定等。
The similar problem on computing blank size also exists in sheet forming, such as spreading size of bending piece, blank size of axial symmetry parts by deep drawing.
对具有任意的自相似指数的轴对称动力学问题进行自相似求解，导出解析解的一般表示。
Axisymmetric dynamics problems with arbitrary index of self-similarity are solved by the ways of self-similarity, and the general representations of the analytical solutions are deduced.
研究含轴对称抛物线曲裂纹平面弹性问题。
The problem of an elastic plane having symmetric parabolic crack is discussed.
针对轴对称目标三维姿态参数中的偏航角、俯仰角的提取问题，提出了一种自动提取目标中轴线方法。
In order to measure the pitching Angle and yaw Angle of the axes symmetry object in three-dimension orientation, an automatic method of extracting the axes of the object has been presented.
本文的主要目的是介绍一种求解轴对称板壳大挠度问题的新的正则摄动方法——自由参数摄动法。
This paper presents a new perturbation method of analysis to solve large deflections problems of plates and shells-Free-Parameter perturbation method (FPPM).
对于轴对称任意径向分层的完全非均匀介质，建立了求解静场问题数值模格林函数的理论及高效计算方法；
The theory and high efficient algorithm is set up to obtain the numerical mode Greens function for static steady field problem in arbitrary cylindrical layered media.
本文研究了一个弹性有限圆柱厚壳的轴对称弯曲问题。
The axisymmetric problems of a thick-walled elastic circular cylindrical shell with finite length are studied.
简要讨论全息CT测量原理，针对光学CT测量中轴对称场的重构问题讨论了环带法。
The principle of holographic ct measurement is introduced briefly, and to the reconstruction of axis symmetry field measured by optical ct, zoned method is discussed.
简要讨论全息CT测量原理，针对光学CT测量中轴对称场的重构问题讨论了环带法。
The principle of holographic ct measurement is introduced briefly, and to the reconstruction of axis symmetry field measured by optical ct, zoned method is discussed.
应用推荐