在4坐标数控机床上实现了几何误差的软件补偿。
The software compensation of geometric error is realized in 4-coordinate NC machine tool.
利用软件补偿处理，提高了陀螺的温度性能和线性度。
Temperature performance and linearity were improved with software compensation.
研究了以神经网络（NN）为模型的软件补偿不同机床热误差。
Software based on neural network(NN) to compensate machine tools therm al deformation is studied.
光纤陀螺温度补偿方法可以分为硬件补偿方法和软件补偿方法。
The method for the compensation of FOG temperature bias can be divided into the hardware method and the software method.
提出和研究了用人工神经网络对其进行温度补偿的软件补偿技术。
The text proposed the temperature compensation with the artificial neural networks to it the software compensation technology.
其次是数控机床全误差模型的建立，误差参数辨识和软件补偿的实现。
Secondly, total error models for an NC machine tool, were developed, the error parameters were identified and the software error compensation was accomplished.
然后，利用所得到的静态温度模型对该加速度计进行温度误差软件补偿。
Then, through the model, we can finish easily the accelerometer's temperature error compensation on the software design.
由于该机型具有弱耦合特性，使得用软件补偿精度的方法变得方便可行。
Due to the weakly-coupled property, it is easy to use software to compensate precision.
针对传感器信号中存在的非线性误差，介绍了硬件补偿和软件补偿两种方法。
Hardware compensation and software compensation methods for nonlinearity in the sensor signal are introduced.
利用若干个位置和姿态下的偏差值，间接计算出机床的结构误差，然后进行软件补偿。
With these values we can use this method to figure out the structural errors and then use software to compensate.
软件补偿方法对系统要求不高，但是它的补偿精度有限，尤其是对高精度的光纤陀螺。
The software method has lower requirement for system but is limited on high precision, especially for the FOG with high precision.
为解决电视摄像机在连续变焦过程产生光轴线的偏移问题，提出了一种动态软件补偿技术。
To solve the optic axis offset of the TV camera, this article proposed a dynamic software compensation technology in continual focal variation process.
实验证明动态误差具有一定的重复性，可用软件补偿，从而提高三坐标测量机快速测量的精度。
The test results show that the repeatability of dynamic errors is good. The errors can be compensated by software method to enhance the accuracy of the CMMs.
其目的是对井下失真信号在地面进行软件补偿和校正 ，以克服电缆、温度等原因造成的信号失真。
The self adaptive filter can reshape downhole signals, and the distorted signals are compensated and rectified by software on surface.
介绍了压电射流角速度传感器的软件补偿技术，给出了压电射流角速度传感器的温度补偿和线性补偿的原理和程序。
The compensation technology for the piezoelectric fluidic angular sensors is discussed, including the principle and program of temperature compensation and linearity compensation.
本文针对在压力传感器电路中采用温度硬件补偿措施成本较高且精度不高的情况，建立了RBF网络软件补偿模型。
Aiming at the problem that hardware compensation has the shortcomings of high cost and low precision, a software compensation model based-on RBF is suggested.
触发电路结构简单，控制灵活，温度影响小，控制精度可通过软件补偿，移相范围可任意调节等特点，目前已获得业界的广泛认可。
Trigger circuit structure is simple, flexible control, temperature, control accuracy can be compensated by software, can adjust arbitrarily limits have won the wide recognition.
在杂散场测量与软件补偿实验中，发现同心圆逆磁线圈感应的杂散信号主要来自垂直场、涡流电流、等离子体电流和纵场电流的变化。
In the experiments of measurement and software compensation of diamagnetism, it is found that stray fields mainly come from the vertical field, plasma current and eddy current.
数控加工后置处理不仅是CAD/CAM技术和数控编程系统的重要组成部分，而且也是实现数控机床几何误差软件补偿的重要途径。
Post-processing of CNC machine tools is the important component of the CAD/CAM technology and NC programming system. Also, it is important way of compensating geometric error by software.
根据误差模型及系数，采用软件进行误差补偿，有效地提高了测角系统的精确度。
The accuracy of angular displacement was increased greatly by software error compensation according to the error model and parameters.
采用WINCC设计测长监控与显示程序，并利用误差补偿技术及完善的软件设计方法，保证了测长系统的高效准确。
The programs for monitoring and displaying are designed using WINCC. The methods for improving efficiency and precision by error compensation and perfect software design are adopted.
介绍了低压配电网无功功率自动补偿控制器的软件和硬件设计方法。
Hardware and software design of reactive power automatic compensation controller for low-voltage distribution systems is introduced.
在系统硬件的基础上完成了温度补偿系统的软件设计。
In a complete hardware system based on the temperature compensation system software design.
介绍一种利用软件实现的引线电阻补偿方法。
A way to compensate the line resistance by means of software is presented.
最后，还介绍了如何在图像处理软件内去补偿印刷阶段的网点扩大。
Finally, guides how to utilize image processing software to compensate dot gain for printing stage are also discussed.
本文介绍其工作原理，自动补偿原理以及应用软件。
The working principle, automatic compensating principle and application software are presented in the paper.
阐述了系统的硬件结构、软件流程、检测原理和补偿的控制策略。
The hardware structure, software design, measuring principle and compensating policy is given in detail.
阐述了它的工作原理、结构及性能特点，并提出了用软件进行温度补偿的有效方法。
It's working principle, structure and properties are reported. A valid temperature-compensated method by software is also given out.
专门针对该型导弹设计的离轴板以及火控软件，尤其是工程实现方面的补偿设计是导弹综合的关键技术。
The special control board and weapon control software for the missile, especially the compensable design used in practice, are key technology for the missile integration.
专门针对该型导弹设计的离轴板以及火控软件，尤其是工程实现方面的补偿设计是导弹综合的关键技术。
The special control board and weapon control software for the missile, especially the compensable design used in practice, are key technology for the missile integration.
应用推荐