本文主要完成对软件系统的设计。
This paper mainly completes the design to the software system.
同时完成了软件系统的设计实现。
并结合硬件系统，进行了相应软件系统的设计。
And the software system designed combined with its hardware system.
文章介绍了机器人施釉主控软件系统的设计与实现。
The paper introduces the design and realization of the main control software system of the robot glazing system.
并讨论了其硬件系统和软件系统的设计方法及功能。
The design and function of both hardware and software are discussed.
获得正确的体系结构，这对于软件系统的设计至关重要。
Getting the right architecture, which is often crucial to the success of a software system design.
本文重点讨论了定位仪的硬件和软件系统的设计与实现方法。
The design and implementation methods of hardware and software systems of the orientation instrument are discussed in detail.
第三章构建了虚拟现实系统，包括硬件的组成与软件系统的设计。
The third chapter is about the construction of the virtual reality system, which includes the software system design and the hardware system design.
详细介绍该仪器的总体框架、主要模块的电路和软件系统的设计。
Details on the design of overall framework of equipment, the main module circuit and software system.
本文介绍一个计算机辅助教学软件系统的设计思想和关键技术要点。
This paper describes the design consideration and executive points of a computer assisted instruction system.
四是对计算机软件系统的设计思路、工作原理和实现方法进行了阐述。
The last is to elaborate the working principle, designing mentality and realizing method, computer software.
文中还介绍了软件系统的设计和主要功能，给出了实际测得的光谱图。
The design and main functions of the software system are introduced briefly. Spectra from practical measurements are given.
本文介绍了色谱柱切换系统控制软件的主要功能以及软件系统的设计。
The designing of chromatographic columns switch system control software and the main functions of this software are introduced in this paper.
建模技术在复杂软件系统的设计、开发、集成和测试中起着重要的作用。
Modeling technology plays an important role in design, development, integration and test of complex software systems.
其中，着重对该仪器软件系统的设计和数据串行通信机制进行了分析和研究。
It puts emphasis on the design of instrument's software system and the mechanism of data's serial communication.
对DRM系统架构、数字接收机的设计，以及软件系统的设计做了总体描述。
It also generally described DRM system's structure, design of hardware digital receiver and software system framework.
系统地阐述了计算机辅助焊接件展开图形自动生成软件系统的设计方法与原理。
The paper discusses the design method and principle for "Automatic Creation Software System of Outspread Drawing for Welding".
本文主要研究了基于pc机的面向结构健康监测的集成软件系统的设计与实现。
This dissertation studies the design and realization of a PC-based integrated software system for structure health monitoring.
我参加了该项目的研发工作，主要负责软件系统的设计、开发和调试等方面的工作。
I participated in the grinding a job of this the item, work of the aspect such as design, development and debugging etc of primary cognizance software system.
文中提出了智能控制方案及控制输出实施方案，介绍了控制器硬件结构与软件系统的设计。
It puts forward a control plan and the control output implementation scheme. The structure of controller hardware and the design of software system are also introduced.
而进行软件系统的设计和实现，可对星上加密功能进行模拟，而在地面接收系统中实现解密功能。
The design and realization of software system can fulfill the requirement of decryption in receive system on the ground.
对电饭煲的模糊控制原理进行了深入的探讨，并分析了其硬件控制电路的组成和软件系统的设计。
An approach is made to the fuzzy control axiom of electric rice cookers, accompanied with an analysis of the constitution of the hardware control circuit and the design of the software system.
论文还详细介绍了软件系统的设计思想，阐述了视觉检测软件的工作原理以及各功能模块的作用。
The paper also introduced the software system, analyzed the composition of the software system, working principle and the module function.
介绍了一种高性能的电热锅炉控制系统，对其系统功能、硬件系统配置和软件系统的设计进行了讨论。
This paper has introduced a high quality electricity boiler control system and discussed the system function, hardware arrangement and software consistence.
根据平显模拟系统的功能要求，进行了硬件系统和软件系统的设计，并对模块的实现方法进行了说明。
Based on the function of the Head-up display simulation system, this paper gives the design of the hardware and software systems, and carries out the explains of the module.
介绍了根据GB92 2 2 88《水管锅炉受压元件强度计算》而开发的实用软件系统的设计思想。
Introduces the main ideas of the software system that is developed from China GB9222-88(Strength calculation of pressure parts for water tube boiler).
作者还以实现算法为中心，完成了主要的硬件设计和DSP目标板的软件系统的设计以及上位机程序的设计。
Surrounding the actualization of the algorithm, the author accomplished the main hardware and software design of the DSP target. The upper computer software has also been designed.
整个软件系统的设计采用面向对象技术，对端口直接读写，有效封装D O S 通信代码，缩短了开发周期。
The whole system is designed to write and read LPTX port directly and to encapsulate effectively DOS code based on OOP techniques, thus shortens development period.
整个软件系统的设计采用面向对象技术，对端口直接读写，有效封装D O S 通信代码，缩短了开发周期。
The whole system is designed to write and read LPTX port directly and to encapsulate effectively DOS code based on OOP techniques, thus shortens development period.
应用推荐