现在已经有两名学员在剑桥工作了一个月,使用已经上市的软件开始为巡航状态的发动机性能建立对象模型。
Already, two trainees have been at Cambridge University for a month, using commercially available software to begin setting objectives for the performance of the engine during cruise.
他利用公司的主打软件,建立了一个缺少地球自转离心力的虚拟模型。
He used ArcGIS, the company's flagship software, to build a virtual model of the planet in the absence of centrifugal force.
Viega与McGraw在《建立安全的软件》(addison -Wesley, 2002)一书的95页提出了通过问题与答案进行密码重置的较好模型。
A good model for password resets via question and answer was proposed by Viega and McGraw on page 95 of Building Secure Software (Addison-Wesley, 2002).
“你拥有的整个商业模型建立在四周的恶意软件上,”他说。
"You've got a whole business model built up around malware," he says.
与建造物理模型或者使用数学模型不同的是,软件设计者靠编写高层的代码来建立“模型”。
Instead of building physical models to scale, or using mathematical models, software designers typically "model" by writing high level code.
对这些故障数据进行分析,最终建立了一个基于此软件系统的可靠性模型。
Finally, I establish a software reliability model based on the software system by analyzing these failure data.
本文基于ANSYS软件建立了车架结构的实体单元模型,对汽车车架结构进行静力和动力分析的研究。
This article, based on ANSYS software, has set up the entity unit model of the frame structure, and made a research on static and dynamic analysis.
因此,我们利用UML和形式化方法来设计面向方面程序,并建立相应的面向方面软件设计模型来设计实时系统。
So we express the AOP using UML and formal methods, and establish the Aspect-Oriented Software Design Model correspondingly to model real-time systems.
在开发夹具数字化手册软件基础上,分析了夹具网络协同设计系统的体系结构和数据流程,建立了基于ASP的系统模型。
On the basis of exploitation of digitized fixture design handbook, analyzed the framework and data flow of the fixture network collaborative design system, and set up system model based on ASP.
并利用通用有限元软件ANSYS建立其力学模型并求解。
Utilized general FEM software ANSYS to establish mechanical model and solve.
建立了基于组件技术的模型规范和软件体系结构,实现组合式的仿真应用构建模式。
Component software technology based on model specification and software architecture is established, which realized simulation system constructing mode of composing.
为了建立发动机数学模型和验证CRUISE软件模拟计算的精度,分别做了发动机稳态试验和整车性能试验。
The engine stable experiment and passenger car road test were done in order to build the engine model and testify the accuracy of the simulation by CRUISE.
水文地质概念模型是用GMS软件中的概念模型方法建立的,并用预估—校正法对模型进行了识别。
The hydrogeology conceptual model is build with the conceptual model method in GMS software, and predict-adjust method is used to calibrate the model.
利用流线方法建立化学驱提高原油采收率潜力预测模型,研制了相应的化学驱潜力预测软件。
The chemical flooding potentiality predictive model was established on streamline method, and the corresponding software was also developed.
本文采用软件无线电思想,建立了系统实现模型,并论证了系统模型的可实现性。
Using software radio, this paper set up a model of the system, and demonstrates the realization of the model.
运用大型有限元软件MARC,建立轧制模型,编写过程文件,设置不同的轧制条件参数。
Second, using large-scale finite element method software—MARC establishes the rolling model, and compiles the process file, and sets up the different rolling condition parameters.
方法:近红外漫反射光谱法结合OPUS软件,建立定性鉴别模型。
Method: a qualitative model was established by NIR DRS and OPUS software.
建立了合理的数据结构及适当的类等级,从而完成了整个软件系统的面向对象分析和设计模型。
And then, data structure and classes grade were built up, the objects and the model of the software system were completed.
在传热学的基础上建立了激光焦点在透明材料内部作用时的温度场模型,借助于大型有限元分析软件ANSYS进行了数值模拟。
Based on heat transferring, a thermal field model of Laser Inner Cutting system was established and numerically simulated with the help of finite element software ANSYS.
采用ANSYS有限元分析软件,建立了由南京昊中建筑设备租赁有限公司提供的型号为QTZ40塔机的有限元模型。
The element mode of QTZ40 tower crane was founded by the software of ANSYS, which was produced by the Wuzhong Architecture Equipment Lease limited Company in Nanjing city.
运用有限元软件ABAQUS建立钢筋混凝土桥面板与橡胶支座的有限元模型,设置接触属性来模拟二者之间的接触作用。
Using ABAQUS to build the finite element model of reinforced concrete hollow slab and rubber bearing, simulate contact effect between them by set contact property.
在详细的考虑转向机构、前后空气悬架、车身等部件的基础上,利用ADAMS/VIEW软件建立了某中型客车的操纵稳定性多体模型。
A handling simulation multibody model of a midibus is built using ADAMS/VIEW after we consider the steer system, front and rear air suspension.
因此采用大型有限元计算软件建立甲板局部结构模型,对系泊工况下甲板局部加强进行强度校核。
Therefore, we adopt finite element software to establish finite element model of local deck structure, calculate structure stresses and to check its strength.
并结合建模软件建立储层沉积微相模型,实现了测井解释成果的定量化应用。
It establishes reservoir microfacies using modeling software to realize quantitative application of well logging interpretation.
运用DEFORM软件建立仿真模型进行模拟分析,对圆锥套圈的成对闭式冷辗扩的可行性和优势进行了验证。
Using the DEFORM software, the simulation model was established and analyzed, the feasibility and the superiority of the closed type cold rolling with pair taper ferrule were justified.
结合大型有限元软件ANSYS,建立了筏形基础地基相互作用体系的全三维有限元模型。
Using general-purpose finite element program ANSYS, a three-dimensional finite element model of interaction between raft foundation and groundwork soil is established.
运用系统动力学原理,应用stella5.1.1软件建立种植业优化模型。
Based on the system dynamics principle, I build optimize model of the plantation by applying STELLA5. 1.1 software.
由此建立了软件系统演化模型。
The evolving model of software systems is established consequently.
由此建立了软件系统演化模型。
The evolving model of software systems is established consequently.
应用推荐