这种装置采用软件可编程技术，对不同的备用电源方式，改变整定控制字的方式，从而可适用于各种场合。
The equipment can change the manner of setting control word for various spare power supply modes to fit various situations by software programmable technology.
介绍了一种基于数字信号处理器(dsp)的频率电压紧急控制装置的设计方案，重点阐述了系统的硬件搭建和软件框架。
The design of the emergency control equipment for frequency and voltage based on digital signal processor (DSP) is presented with the hardware build and the software frame mainly discussed.
该装置包括分压器、同轴电缆、触发电路、信号处理、数据采集、控制和分析软件。
Divider, coaxial line, trigger, signal processing, data acquisition, acquisition control and waveform analysis software is included in the device.
本文报告了一种粮食烘干过程中的温度控制装置的研究及应用。给出了系统组成原理和构成方法，介绍了关键软件的编程方法。
Application of a temperature control device in the drying process of grain was studied to present the principle and the method of the system and introduce the method to program the key software.
介绍了一种跳汰机自动控制装置的设计思路，给出了相应的硬件组成和软件设计方法。
Elaboration is made in the paper of considerations concerning jig automatic control device and related hardware components and software design are also given.
介绍了反射式共聚焦光学系统的搭建，整个过程分为显微镜光学系统、扫描装置、检测系统、软件控制四个部分。
This article, introduces setting up of reflectance confocal microscope which is divided into four parts:optical system, scanning system, detecting system and software controlling system.
试验装置采用DELPHI作为开发软件，设计出试验装置的计算机控制软件和相应的IC卡计费软件。
The experiment equipment applies the DELPHI as the develop software tool to program the computer control software and relevant IC card charging software.
文章重点阐述利用无刷直流电动机构建的井下压力闭环实验装置和以无刷直流电动机为控制核心的软件平台。
The paper places emphasis on the closed-loop system of pressure based on BLDC motor and the correlative software.
阐述贵州瓮福磷酸一铵装置JX 300X自动控制系统的结构特点、硬件配置和软件实现等内容。
The structural feature, hardware configuration and software etc. of DCS (JX300X) automatic control system in Guizhou Wengfu MAP plant is described.
本文论述了自动化专业综合工程实验装置的设计方案、硬件配置、控制策略及软件设计。
This paper talks about the control system of micro-beer production line, mainly about its design program, hardware configuration, control strategies and software design.
重建他们的软件版本是不是一种选择（源控制装置）但他们计划在未来升级。
Rebuilding their version of the software is not an option (source control screwup) but they are planning an upgrade in the future.
为了更好地与电力系统其他装置通信、便于操作、优化控制效果，引入了上位机和VQC软件，使人机界面更加友好。
For better communicating with other communication device, convenient operation, improving control effect, upper computer and VQC software is adopted, it make man-machine interface more friendly.
以某电厂水处理系统为例，着重从反渗透装置的控制系统仪表配置到自动控制的软件设计等方面做了论述和总结。
As a example of a water treatment system, some aspects from control system instrument configuration of reverse osmosis device to software design of automatic control are demonstrated.
本文介绍了苯乙烯小试装置微机监控系统的硬件，软件设计和系统的控制方案及控制算法。
In this paper, the hardware, software, control schemes and control algorithm of the microcomputer supervising control system are introduced on styrene pilot test installation.
本文主要介绍微型机的单元自动控制装置在分布处理系统中的作用及其硬件结构、软件任务，以及在水电站的水轮发电机组控制中的应用。
This paper describes the function of RTU in the distributed system as well as its hardware construction and software task, and recommends its application to the control of water turbine generators.
该软件作为一种开放式，可视化的上位机软件，结合本系统的控制装置，可应用于电力部门的远动信道监测系统。
As a visual open telemechanics channel detecting software, it can be applied to most power system's telemechanics generally combining with control devices.
最后，介绍了整个控制装置的软件和硬件实现，并详细叙述了所采用的措施和方法。
Finally, the paper introduces the software and hardware realization of the device, and recounts the measurements and ways adopted in detail.
在此模型中，把实车上使用的控制软件和车辆数值计算机械结构模型结合起来，再现了倾摆主动控制装置的动力学。
In the model the dynamics of the tilting active control devices are reproduced, combining the numerical mechanical model of the vehicle with the control software used on the real vehicle.
分析了吸液率的测量原理，对测定装置控制系统的硬件结构、软件设计和HMI画面组态进行了较详细的说明。
The detail of its control system on hardware configuration, software design and HMI pictures configuration have been illustrated.
介绍了一种用于实现铡草机和青贮添加剂喷洒装置相联动的自动控制仪的工作原理和硬、软件设计。
This paper introduces an automatic controller for a chaff cutter coupled with a spray equipment of silage additives.
该系统可作为计算机控制系统教学的演示装置，亦可进行系统硬、软件设计、调试及控制算法的仿真研究。
The device can be used as a demonstration of computer control system as well as an emulation research for both the software and hardware designing and debugging of the control algorithm.
设计了适合本系统的磁场耦合线圈，开发了控制线圈和声音播放的软件系统，实现了磁诱导睡眠状态下协助记忆装置的研制。
The complete software for magnetic stimulation control and sound player was programmed into the chip. The system with the promotion of memory based on magnetic stimulation was successfully developed.
简要分析了聚酯装置热媒炉原控制系统存在的问题，给出了改造方案的硬件配置和软件设计内容。
Main problems of previous HTM furnace control system in polyester plant are simply analysed. It is given that hardware configuration and software design of modification plan.
分析了由位置控制器、直流传动装置和PLC组成的半浮芯棒连轧机组限动链控制系统的硬件配置及软件组成。
Hardware and software configuration of drive system with position controller, DC drive unit and PLC for a retainer of semi-floating mandrel mill are analysed.
对实验平台的水下对接装置、水声定位系统和控制主机进行了具体的介绍，对实验平台的功能、硬件组成和软件设计进行了详细的说明。
The underwater docking device, the underwater acoustic ranging system and the host computer are described in this paper. The hardware and software of the experimental platform are also introduced.
本文研究一种基于单片机控制的通讯电缆断点测试装置，给出了硬、软件实现的初步方法。
This thesis discusses a device with single chip computer for the measurement of cut point of communication cables, it also gives the way to design the hand and software.
本文介绍了单板计算机控制的LED多功能变色矩阵显示装置软件设计方法。
The software design for multifunction, color-variable led matrix display controlled by a single board computer is described.
本文扼要地阐述了自行研制的电加热炉温度计算机解耦控制系统实验装置，包括硬件配置、实验软件平台以及解耦控制算法。
Based on the PC control of electric stove temperature decoupling system is given in this paper, include it's hardware, software and decoupling arithmetic.
介绍炼油装置生产过程中现场总线控制系统应用，以及控制系统总体设计、控制系统应用软件开发。
The field bus control system was used in the process of oil refining. This system solution was designed and the application software development to this control system was described.
推导出适用于微机控制的数学模型，介绍了实验装置、软件设计及实验结果。
Aside from an experimental apparatus and result, a mathematical model applying to control is derived. The controlling rule and structure are simple.
应用推荐