采用开放式架构设计将重点从硬件设计转向以控制系统为中心的系统设计，同时也增加了软件设计的灵活性。
An open architecture design will add flexibility by shifting the focus of the control systems from being hardware-centric to more software-centric.
详细阐述了一种以芯片TDA7315设计的音频增益控制系统设计方案，同时提供芯片连接关系示意图及软件算法流程图。
A scheme of designing audio auto gain control system based on TDA7315 is introduced, the diagram of chip matching as well as the software flowing chart are also given.
以TMS320 LF 2407为核心设计了燃料电池车离散模型参考自适应控制系统的硬件电路和软件程序。
Taking TMS320LF2407 as the core, the hardware circuits and the software programs of FCEV discrete-time MRAC system are designed.
以步进电机作为控制系统的执行机构，讨论了无模型控制器的输出与步进电机之间的软件连接问题。
The software connection problem between the output of non-model controller and step motor, is discussed using step motor as the actuator of control system.
阐述了光纤连接器生产中的胶固化原理，着重介绍以8031单片机为核心的胶固化机温度控制系统的硬件和软件设计。
A brief principle of glue solidified in producing fiber optic connectors is presented. The hardware and software of the temperature control systems based on 8031 micro computer are emphasized.
以实例介绍了PLC电梯控制系统的组成、其硬件和软件的设计以及怎样用电梯图来编制系统的控制程序。
It detailed introduced composing of the PLC elevator control system, design of the hardware and soft, how to weave control program in graph of elevator for example.
文中以at89c52单片机为核心，阐述了多场合温度测量控制系统的设计，讨论了系统软件、硬件的设计原理和方法。
In the text, it USES AT89C52 as core, elaborated the design of control and temperatures measure system, discuss the design principle of the system software, hardware and method.
介绍了以MCS-51单片机作为处理器的机械式立体车库的特点、工作原理，并给出三车位的控制系统硬件电路图和软件流程框图。
This paper introduces the characteristic of mechanical stereo garage controlled by the MCS-51 serial single-chip, and summarizes the work principle of this system.
本文介绍了以单片机系统来实现一个飞行器的控制系统，详细说明了其中的软件设计技巧。
The paper introduces a design to achieve the flyer's control system with a single chip computer and enter into details on the software design technique.
以某电厂水处理系统为例，着重从反渗透装置的控制系统仪表配置到自动控制的软件设计等方面做了论述和总结。
As a example of a water treatment system, some aspects from control system instrument configuration of reverse osmosis device to software design of automatic control are demonstrated.
以自动数控玻璃雕刻机为例，开发一种基于PMAC的开放式数控系统，该控制系统包括硬件设计和软件设计两大模块。
With the automatic NC glass engraver machine, develop an open architecture NC system based on PMAC, which includes two modules of hardware design and software design.
描述以基于DSP处理器为核心，用于激光快速成型系统的高速运动控制系统软件的体系结构及其开放式设计。
This paper presents an open software design of a DSP - based high - speed motion control system, which is applied in laser rapid - prototyping system.
控制系统的硬件采用了DSP芯片，以保证系统的实时性；软件采用了模糊-神经网络算法，以克服系统模型的不确定性。
DSP chip is applied in hardware design to ensure real-time performance of control system, and fuzzy-neural network algorithm is adopted to overcome uncertainness of control model.
在软件方面，以SVPWM为核心控制算法，用汇编语言完成了整个控制系统软件的编制，包括保护模块、通讯模块等。
As for software, using assemble language of DSP to compile the whole program, including SVPWM module, communication module and protection module.
以大直径LPE炉温度控制系统为例，介绍了世纪星组态软件在工业控制系统中的应用。
With the example of the LPE furnace temperature control system, this paper presents the application of the Century Star configuration software in an industrial control system.
以多功能提取罐监控系统为例，介绍了世纪星组态软件在工业控制系统中的应用。
With the example of the monitoring and controlling system on multi-function extractor this paper presents the application of the Century Star configuration software in an industrial control system.
以基于网络的数字视频监控为基础，论述了数字视频监控中远端摄像仪控制系统的工作原理、帧编码以及软件和硬件的实现方法。
Based on digital network video monitoring, the system to control remote cameras as well as its structure, frame encoding and working mechanisms are explained explicitly.
以MATLAB中动态仿真工具SIMULINK软件包为开发工具，将其应用于该液压伺服闭环控制系统的动态响应计算中，针对上述两种闭环控制系统，给出了考虑干扰量情况下的SIMULINK仿真方法。
A dynamic simulation tool, SIMULINK software package in MATLAB, is taken as the development tool, and applied in the dynamic response computation of the hydraulic servo closed-loop control system.
以pic单片机为核心设计了控制系统的硬件电路和软件流程。
The hardware circuit of control system and the flowchart of main control program for software were designed by using PIC single chip (microprocessor).
本文以自主飞行机器人控制系统项目为研究背景，对基于ARM处理器核的嵌入式实时系统软件构造做了分析。
This thesis works at the back ground of Autonomous Flight Robot project. Thedesign of Embedded Real-Time System software based on ARM (Advanced RISCMachine) is given.
以dsp作为核心控制器，搭建了机械臂控制系统，同时给出了硬件和软件设计方法。
The manipulators control system is set With DSP as the core controller and the hardware and software design method are presented.
以基于嵌入式计算机PC- 104的天线控制系统为例，从软件架构、内存操作、人机接口、性能优化等多方面阐述C语言嵌入式系统的编程技巧。
Taking antenna control system based on embedded computer PC-104 for example, are introduced, including software architecture, memory operation, HMI, performance optimization, etc.
介绍了控制系统的硬件和软件设计，按功能模块说明了以16位单片机为控制核心的硬件电路，并给出了软件流程。
The function module of the system with the 16-bit micro-controller as the central unit is illuminated. This thesis gives the software process.
以TMS320F2812为控制核心，设计了系统的控制驱动电路、采样电路、保护电路、人机接口…更多电路等硬件部分和控制系统软件。
Using TMS320F2812 as the core of the control system, drive circuit, sampling circuit, protection circuits, man-machine interface circuit hardware components and control system software were designed.
并基于S88标准开发批量控制软件，以工业生产中啤酒厂麦汁制备作为实例，给出批量控制系统中实现配方的具体技术。
The batch control software based on S88 standards was developed. With the practice of preparation of brewery wort as example, the specific technique of recipe implementation was given.
介绍了以可编程控制器为核心的高压水除鳞控制系统的工作原理，硬件构成及PLC软件设计。
Introduce the working principle, hardware composition and PLC software design of an iron top-layer removing system with high pressure water based on programmable logic controller.
软件采用模块化设计以实现了机器人运动功能。实验表明样机控制系统合理可靠。
The motion function of robot is achieved by modularized software design. lt has been proved that the control-system has high reliability and it meets the requirement of use in practice.
介绍了以AT 89 C2 0 51单片机为核心控制部件的智能型全自动家用豆浆机的工作原理，并给出了控制系统的硬件和软件的设计方法。
This paper introduces the intelligent soymilk machine's work principle which using AT89C2051 MCU as its center control unit. And the designing methods of hardware and software is given.
介绍了以AT 89 C2 0 51单片机为核心控制部件的智能型全自动家用豆浆机的工作原理，并给出了控制系统的硬件和软件的设计方法。
This paper introduces the intelligent soymilk machine's work principle which using AT89C2051 MCU as its center control unit. And the designing methods of hardware and software is given.
应用推荐