我们看到进行核反应产生中微子的太阳核心的自转速度明显比太阳表面慢。
The core of the sun - where nuclear reactions produce neutrinos - apparently spins more slowly than the surface we see.
考察了聚合反应条件，如溶剂种类、聚合温度、模板浓度、引发剂用量、转速、预聚合时间等对分子印迹聚合物微球特性的影响。
The effects of reaction conditions were studied, including the kind of solvent, polymerization temperature, the concentration of template and initiator, rotational speed and pre-polymerization time.
由于直驱式风力发电机转速较低，定子绕组需要有较多的匝数以输出足够高的电压，因而绕组负载电流的去磁反应较大；
More turns of winding is needed to produce enough voltage because the DPMG rotates at low speed, but the armature reaction is high at same time.
新的天空驱动汽车也注意到了改进中转速发动机的新天空反应的优势。
The new Sky-Drive auto also takes advantage of the improved mid-rev response of the new Sky engines.
欧洲货币单位已经作了改进，以提供一个低转速的反应热和更长期的火花。
The ECU has been tweaked to provide a hotter and longer-duration spark for improved low-rpm response.
通过调整双螺杆挤出机的螺杆转速、不同加热段的温度，确定了接枝反应的最佳工艺条件。
By adjusting the screw speed of the twin-screw extruder, temperatures of different heating stages, the optimal processing conditions for grafting reactions are determined.
试验证明：温度和转速对酸岩反应的反应级数无影响。
Experiments showed that temperature and rotating rate did not affect reaction indices.
准确迅速地反应了发动机转速波动规律。
The microcomputer system exactly and rapidly shows the ratio of fluctuation of speed.
研究了单体质量分数、引发剂质量分数、反应温度和转子转速对接枝聚合物接枝率的影响。
The influences of monomer mass fraction, DCP mass fraction, reaction temperature and rotating velocity on grafting degree were investigated.
采用在熔融挤出过程中提高双螺杆挤出机螺杆转速的方法，研究了机械力引发马来酸酐(MAH)熔融接枝弹性体poe的接枝反应。
Grafting of maleic anhydride (MAH) onto POE performed in melting state through mechanical force initiation by increasing the screw rotation speed of twin-screw extruder was studied.
研究了单体用量、引发剂用量、螺杆转速和反应温度对接枝率的影响。
It studied influencing effects of the content of monomer, the content of DCP, the screw rotating velocity and the reaction temperature on graft ratio.
在低转速时是扩散控制，达一定转速后催化反应为控制步骤。
It is diffusion control at low rotating rate; catalysis reaction is control step when rotating rate reached some degree.
考察了环己烯水合反应工艺中，反应温度、催化剂浓度、搅拌器转速、反应时间以及负荷对环己烯水合反应的影响。
Reaction temperature, catalyst concentration, agitator speed and reaction time as well as reaction load were studied as affecting factors on cyclohexene hydration reaction.
搅拌釜式反应器中的浆液浓度、临界搅拌转速、淤浆悬浮高度和环管反应器中的浆液浓度等参数，既是反应器的设计、优化的重要依据，也是实际生产运行过程中的重要控制变量。
The slurry concentration, minimum agitation speed and slurry suspension height, as the basic parameters in the solid-liquid system, is very important to the design and optimization of the reactors.
通过对提高某化工装置反应器进料泵扬程两种方法的分析对比、实验研究，提出短叶片偏置设计法是提高低比转速离心泵扬程和效率的有效方法。
It is shown after analysis that the efficiency of roto-jet pump is higher than theefficiency of multistage pump and express pump when it operates in the region of low dis-charge and high lift.
在低转速时是扩散控制，达一定转速后催化反应为控制步骤。
It is diffusion control at low rotating rate; catalysis reaction is control step when rotating rate reach...
在低转速时是扩散控制，达一定转速后催化反应为控制步骤。
It is diffusion control at low rotating rate; catalysis reaction is control step when rotating rate reach...
应用推荐