最后提出转炉炼钢今后的发展趋向。
Finally, it indicates the tendency of development of the converter steelmaking from now on.
各钢厂转炉炼钢生产流程差别很大。
The flow routes of converter steelmaking are extremely diversified for different steelmaking Plants.
LD转炉炼钢法是目前世界上的主要炼钢法。
本发明是属于耐火材料，主要用于氧气转炉炼钢。
The present invention relates to refractory material for oxygen and making in converter.
主要用于转炉炼钢、溅渣护炉，能提高转炉炉龄。
It is used for converter steel making, through the splashing cross to protect the furnace, which can raise the furnace life.
本文介绍一个转炉炼钢副原料称量及卸料的微机控制系统。
This paper introduces a microcomputer controlled system for flux weighing and discharging in LD steelmaking.
确定了转炉炼钢的重点污染因子是粉尘、烟尘和SO2等。
The dust, soot and SO2 were identified as the key pollutant factors.
它对转炉炼钢生产过程和炼钢设计均有一定的实际参考价值。
It is of practical and referential importance to production and design of LD converter refining.
该模型把复杂的转炉炼钢过程控制简化为炼钢供氧时间的控制。
In This model complicate steelmaking process is simplified into control of blowing time.
一种转炉炼钢用全均质含钡挡渣球，属于转炉炼钢用的挡渣材料。
A kind of homogeneous barium-based slag ball used in converter process, belong to slag material used in converter process.
转炉炼钢在吹炼过程中，产生的CO气体具有很高的回收利用价值。
The converter makes steel in blew process, the output of co has the very high recovery use value.
主要简述转炉炼钢、炉外精炼技术的开发、应用、现状和发展趋势。
Development, application, current status and prospect in the steelmaking and secondary refining technologies have been briefly discussed.
本论文的目的是为转炉炼钢终点的自动控制提供一种新的判断参数。
Aimed to provide new set of characteristic parameters for the automatic control of the end-point in this paper.
结合生产实践，对本钢回转窑生产供转炉炼钢用高质量石灰进行研究。
Combined production practices, research is done on the high-quality lime which produced through rotary kiln for converter steel making at Bengang.
本文对复吹转炉炼钢工艺中加入碱渣代替部分萤石和石灰进行了试验研究。
The paper mainly introduced the process of slag-forming by using alkali slag as a substitute to fluorite and lime in top-bottom combined blowing converter.
转炉炼钢过程控制的核心是吹炼终点控制模型，该模型又由三个子模型组成。
The kernel of the converter blowing procedure control is the blowing endpoint control model which is made up of three submodels.
主要介绍马钢转炉炼钢除尘污泥利用技术的开发和在烧结生产中的利用情况。
The proportioning technique of BOF sludge in sintering blend yard developed by Ma-Steel and its operation state were presented in this paper.
简要介绍了转炉炼钢从上料开始到装炉料、吹炼、造渣、出钢、出渣的工艺过程；
The process is briefly presented form loading material, charging furnace, converting, slagging to tapping of steel and slag.
第二部分论述了转炉炼钢中转炉倾动控制、氧枪控制、上料控制及除尘控制的原理。
In the 2st part, the principles of converter gradient control, oxygen lance control, material loading control and dust exhaust control are described.
这就是氧气顶吹转炉炼钢法（LD炼钢法）。这种方法使用氧气来氧化铁水中的杂质。
This was the LD process, which used oxygen gas for the oxidation of impurities in iron.
转炉炼钢过程中，炉渣氧化性直接影响吹炼过程中的化渣速度、炉渣粘度、喷溅情况等。
During the process of converter steelmaking, the oxidbillity of slag had an direct influence on the speed of melting slag, the viscosity of slag and the extent of sputter.
分析了氧气顶吹转炉炼钢的氧气需求量与所配套空分设备氧气供应量之间的不均衡关系；
The imbalance between oxygen requirement from Linz-Donawitz process steel-making system and oxygen supply of supporting air separation unit is analyzed.
转炉炼钢过程中炉渣的岩相特征对转炉的冶炼操作以及炉渣的综合利用都具有重要意义。
Mineralogical morphology of converter steelmaking slag has great significance to smelting operations, as well as to the utilization of steelmaking slag.
介绍了包头钢铁公司转炉炼钢过程控制级的软件结构，详细地说明了应用软件、基础软件。
To introduce the software structure of computer process control system for LD converter of Baotou ironand Steel Corporation.
以理论模型为基础，建立了转炉炼钢控制模型，并将人工神经网络模型应用到转炉控制中。
Based on theory model, the authors set up the control model of converter steelmaking, adopting artificial neural network model.
介绍了档渣球和挡渣塞技术在转炉炼钢的实际应用，有利于降低原材料消耗、增加企业效益。
It is introduced that the technology of slag stopping with ball and bar to converter steelmaking. This technology favours reducing material consumer and increasing economic benefits of enterprises.
介绍了转炉炼钢留渣操作在兑铁时引起喷溅的危害及留渣操作的很多优点和可观的经济效益。
Keeping slag operation in steel making in revolver, with mang advantage and numerous economically benefits, may encounter the danger of melted slay pray when pouring melted iron.
介绍了转炉炼钢留渣操作在兑铁时引起喷溅的危害及留渣操作的很多优点和可观的经济效益。
Keeping slag operation in steel making in revolver, with mang advantage and numerous economically benefits, may encounter the danger of melted slay pray when pouring melted iron.
应用推荐