服务转换器模式也是通过对简单服务代理模式扩展而来。
The service translator pattern also extends the simple service proxy pattern.
服务转换器模式引入了转换,允许对ESB 提供的接口采用与最终提供者不同的格式。
The service translator pattern introduces transform(s) which allow the interface(s) presented by the ESB to differ from that of an end provider.
此模式是服务转换器模式的专门化模式,由于自身的特殊性,它可以应用于一系列其他模式。
This pattern is a specialisation of the service translator pattern and is included in its own right as it has a very specific rationale which may apply across a range of other patterns.
此模式对转换器和路由器模式进行了扩展,支持备选服务提供者(使用不同的接口提供语义等效的服务)概念。
This pattern extends both the translator and router patterns and supports the concept of alternate service providers who offer semantically equivalent services with differing interfaces.
这个转换器期望用户输入mask属性中给定的格式(模式),然后将其输入转换为基本的字符串。
This converter expects users to input data in the format (pattern) specified in the mask attribute and then knows to translate the input into a basic string.
这种语法转换器会遍历每条规则,并试图查找一个匹配的模式。
The syntax transformer will go through each rule and try to find a matching pattern.
在OutsideIn转换器的情况下,当启用了此模式时,将不会从临时文件位置删除源文件和转换后的文件的副本。
In the case of OutsideIn convertors, when this mode is enabled, the copy of the source file and the converted file are not deleted from the temporary location.
最专业的和易于使用的3D视频转换器,允许用户将2D视频转换为3D,将三维到二维以及三维模式转换。
The most professional and easy-to-use 3D Video Converter, allowing users to convert 2D videos to 3D, convert 3D to 2D as well as convert 3D modes.
论文系统地研究了DC/DC转换器的工作原理和控制模式,为XD1124的设计提供了理论指导。
This paper analyses the basic principles and control modes of DC/DC converter, which is the theory guidance of the design and the implementation of XD1124.
在分析峰值电流模式升压转换器原理的基础上,设计了一种结构新颖,高精度高性能跨导误差放大器。
On the basis of analyzing the principle of peak-current-mode-controlled boost converter, a novel transconductance error amplifier with high accuracy and high performance is presented.
当一个不完美的两个设备之间的接触-例如与热敏传感器和A至D转换器端口-发生时,温度检测有可能成为这样的模式,如下所示。
When an imperfect contact between two devices - for example between the thermistor sensor and the A-to-D converter port - occurs, the detected temperature may become like this pattern, as shown here.
同时在反相位模式和在同相位模式操作的运动转换器(64)产生工件的复杂运动。
The motion converter (64), operating simultaneously in an opposing phase mode and in phase modes, produces a complex motion of the workpiece.
从而验证了同轴插板式模式转换器的可行性。
The experiment demonstrates the feasibility of the coaxial fin-inserted mode converter.
在辅助电源方面,采用低空载损耗之返驰式转换器架构,提供待机模式下所需之系统电源。
To achieve the standby mode system operations, the Tinyswitch flyback converter which features low no-load loss is used for the auxiliary power circuit.
本文设计了一种S波段高功率微波天线的馈源系统,该系统由双模圆锥喇叭和矩-圆模式转换器两部分组成。
This paper designs a S-band feed system for HPM antenna, which consists of a dual-mode conical horn and a rectangular-circular mode convertor.
在这种结构中,高斯模可以转移到环形模,因此这种光纤可以作为一种模式转换器。
In this structure, the Gaussian mode could be transferred to the ring mode. So FEPCF could used as a mode convertor.
本文针对滞环电流控制模式buck - boostDC - DC转换器,设计了其中的电流检测部分。
In this paper, current detection circuits which could be used for hysteresis current control mode buck-boost DC-DC converters were designed.
在第二子模式(“低输出功率子模式”)中,使用脉冲宽度调制来调节VOUT,但转换器开关频率固定在第一频率。
In a second sub-mode ('low output power sub-mode'), VOUT is regulated using pulse width modulation, but the converter switching frequency is fixed at a first frequency.
分析了ADC转换器单端模式下对电压信号的采集过程和DMA控制器对外部存储器写入数据的过程。
The process of data acquisition with ADC controller in single-ended mode and the process of data storage with DMA controller are described.
本文阐述了我院自行研制的气垫床工作模式转换器的结构、工作原理及应用效果。
Describes the structure, working principle and applicable effect of the conversion machine for air cushion bed, which is developed by our hospital itself.
在1.2MHz的工作,这升压转换器可以操作的P -模式优越的瞬态响应,或更严格的输出调节的PI -模式。
Operating at 1.2mhz, this boost converter can operate in either P-Mode for superior transient response, or in PI-Mode for tighter output regulation.
由于高功率源采用BJ-32波导输出信号,故馈源系统中还应包含一个矩形到圆形的模式转换器,将TE10模转换为TE11模。
Since the high power signal is transmitted from the BJ-32 waveguide, a mode convertor from rectangular TE10 mode to circular TE11 mode in the feed system should be provided.
可选型号:模拟电压控制模式,双功能模式,转换器和移相器操作有可选输入。
Optional models: Analog Voltage controlled models. Dual function models, selectable input for either translator or phase shifter operations.
本文分析了采用滞环模式控制的转换器的工作原理,介绍了几种传统的可用于DC-DC转换器的电流检测技术,比较了各种电流检测电路结构。
This paper analyzed the working principle of hysteretic mode control, introduced and compared several traditional current detection techniques which could be applied for DC-DC converter.
图像数据转换器205以帧内模式转换并传送转换开始帧的图像。
An image data conversion unit (205) converts the image of a conversion starting frame into an intra-mode, and outputs the converted image.
图像数据转换器205以帧内模式转换并传送转换开始帧的图像。
An image data conversion unit (205) converts the image of a conversion starting frame into an intra-mode, and outputs the converted image.
应用推荐