转动轴上水平安装一块阀板。
The rotation axle is horizontally provided with a valve plate.
这一工作原理就像磁带，只是没有转动轴。
It works like a tape, except that there are no moving spools.
第二空腔承接转动轴。
转动轴的一端通过拉杆和重锤杆与电磁铁相连。
One end of the rotation axle is connected with an electromagnet by a pull rod and a weight rod.
转动轴腔充气密封，消除了粉尘粘结现象。带自动清洗功能。
The rotation drive shaft is sealed with inflatable chamber, eliminating the dust coalescence phenomenon. There is a function for automatic cleaning.
利用等效线弹簧模型近似计算了含裂纹转动轴的自由振动基频。
In this paper a model of the equivalent linear spring is proposed for approximately calculating fundamental frequencies of a vibrating shaft with an arbitrary crack.
罐体底部设置有卸料系统，其螺旋输送器由转动轴座和限位座支撑。
The unloading system is arranged at the bottom part of the tank body, and a spiral conveyor is supported by a rotating shaft seat and a position-limiting seat.
光学系统在平行于转动轴方向(22)上平位移动以便扫描该样本。
The optical system moves in translation parallel to the rotational axis (22) to scan the sample.
本转动轴用轴套安装组合件结构简单，安装连接可靠，拆卸方便。
The shaft sleeve installation assembly for the rotation shaft has simple structure, reliable installation and connection and convenient disassembly.
转动轴用轴套安装组合件涉及固定安装在转动轴上的护轴轴套领域。
A shaft sleeve installation assembly for a rotation shaft relates to the field for a shaft protecting sleeve on the rotation shaft.
方位部分采用转台式结构，俯仰部分把光电传感器与转动轴合二为一。
The part of the azimuth adopts a revolving pedestal, the part of the pitching combines a photoelectric sensor and the axis of rotation.
它包括转动轴、安装在转动轴两端的轴承、安装着轴承的两个轴承座。
The rotating shaft mechanism comprises a rotating shaft, bearings installed at the both ends of the rotating shaft and two bearing seats installed with bearings.
合适的导轴承空隙，才可能同时保障转动轴与支座的振动均在准许范围内。
The appropriate guide bearing gap, it is possible to ensure that the vibration of the rotating shaft and bearings are within the permitted range.
半径是这个转动轴-，转动轴在这里-，距离从这里到这里，你们也许想不到，有15米。
The radius from the axis of rotation — - the axis of rotation is here — and the distance from here to here, though you may not think so, is about 15 meters.
将一种分布式模态参数方法，应用于带有能量消耗和非线性载荷的大型转动轴。
The method USES a modal parameter formulation and is applicable to the case of the energy loss shafts and nonlinear loads.
就在气体进入发动机喷嘴，他们通过一个风扇，这样的一套涡轮叶片转动轴发动机。
Just before the gases enter the engine nozzle, they pass through a fan-like set of turbine blades which rotates the engine shaft.
转动惯性：物体在绕着自己的对称轴转动时，具有保持转速和转动轴方向不变的性质。
Moment of inertia: turning around its axis of symmetry, object has the character keeping speed and the direction of the axis of rotation not changing.
导轴承空隙过小，会把转动轴的振动传给支座和基础，导轴承空隙过大，转动轴振动大。
Guide bearing clearance is too small, the vibration of the rotating shaft will be transferred to the bearing and foundation, the bearing clearance is too large, the rotating shaft vibration.
它的两端安装在球面轴承上，因而对于两端轴承座与转动轴中心线的同心度要求不高；
The both ends are installed on the spherical bearings, therefore, the requirement of concentricity of the bearing seats at the both ends and the central line of the rotating shaft is not high;
从相对平衡的角度分析了刚体定轴转动轴上附加压力产生的原因以及实现自由转动的条件。
From the Angle of relative equilibrium, the paper analysis the reason of the formation of the additional pressure on the axis of fixed-point rotation of rigid body.
而且它能使修整工具转动，可不考虑绕转动轴的转动对两移动轴的影响，故数控编程容易实现。
It can let the dressing tools turn around, influence of running around the rotating axis on the two moving axes wont be considered, thus the corresponding nc programming is easy.
其主要特点是：由被切型材横截面决定其切削刃形状的刀具被安装在转动轴上，随转动轴转动。
The utility model is characterized in that: the transverse sections of shaped sections to be severed determine that the edged cutting tools are fixed on the rotation axes and rotate along.
本实用新型公开了一种钢包保温盖铰链，该机构包括固定槽，转动槽、转动轴、销键、销槽支撑臂。
The utility model discloses a hinge for an insulating cover of a steel ladle, which comprises a fixed slot, a rotating slot, a rotating shaft, a pin key, a pin slot, and a supporting arm.
在单纯水力系统传输特性研究的基础上，又引入转动轴的力矩参数，进行离心水泵的传输特性实验研究。
An experimental study was conducted on the transmission characteristics of hydraulic system of centrifugal pumps with a torque parameter included.
一种空气过滤机，它涉及炭（9）的吸附技术，转动轴（4）穿过输气管（13）与螺旋桨（2）相连。
The utility model discloses an air filter, which relates to the absorption technology of charcoal (9), a rotation shaft (4) is connected with a propeller (2) through a gas pipe (13);
它也可以被写成，这里我写上,你们马上会发现原因，那就是转动惯量,取决于我选择，哪一个转动轴,乘以ω的平方。
1/2I So this can also be written as one-half I, C I put a C there you will see shortly why, because the moment of inertia depends upon which axis of rotation I choose times omega squared.
一种减少磨擦的轴承，主要由包括可自由旋转的硬金属珠的环状轨道构成，转动轴或其他部件因撞碰金属珠而转动。
A friction-reducing bearing consisting essentially of a ring-shaped track containing freely revolving hard metal balls against which a rotating shaft or other part turns.
良好稳定的挥杆要求在整个挥杆的过程中保持身体转动轴的稳定和身体的平衡，整个身体没有大幅度的左右侧向滑动。
Making a great swing is about maintaining the natural balance of the body through the swing, not moving the balance point from left to right like many players are being told to do.
通过连接机构(171)把电动马达(170)与直进用hst式变速机构(35)的直进用转动轴(105)关联安装。
The straight advance rotary shaft (105) of a straight advance HST system speed change mechanism (35) is associated with an electric motor (170) through a link mechanism (171).
本发明涉及一种计算机断层摄影装置，其中来自转子的数据以光 电形式进行传输，在计算机断层摄影装置操作期间该转子绕转动轴转 动。
The invention relates to a computer tomograph, in which data from a rotor, which during operation of the computer tomograph rotates about an axis of rotation, is transferred optoelectronically.
应用推荐