研究了不同轧制方式对硅钢薄带磁性能的影响规律。
The influence of the rolling method on the magnetic properties of thin silicon steel sheets was investigated.
低合金高强度调质钢建议采用一阶段的轧制方式，冷速不宜过低。
Low-alloy high strength quenched and tempered steel suggested using one-stage rolling method, cooling rate should not be too low.
独特的二辊和三辊结合的轧制方式，使得轧制的杆材具有优良的机械性能。
With an unique rolling method combining 2-high rolling stand with 3-high rolling stand, the copper rod is provided with a good mechanic performance.
通过轧制温度、轧制方式实验，以及织构和力学性能分析，研究了轧制工艺对液晶显示背光源用的深冲钼带的组织和性能的影响。
The effect of rolling process on the microstructure and mechanical properties of deep-drawing molybdenum strip was investigated in this paper through changing rolling temperature and rolling process.
折叠。经过轧制或采用其它方式加工的金属沿着轧制金属表面折叠起来，但并未被熔合成完好金属。
Lap. Fold of metal which has been rolled or otherwise worked against the surface of rolled metal, but has not fused into sound metal.
分析了棒材轧制过程中微张力控制的基本原理，以及微张力控制在PLC程序中的实现方式。
The basic principle of micro tension controlling in rolling process of bar and the realization means of micro tension controlling in PLC program were analyzed.
由于再加热炉出料方式设计上的原因，限制了PQF轧机生产线的轧制节奏，从而影响产量。
Some negligence in design about discharge method of reheating furnace limit the speed and the output of PQF mill line.
由于导卫装置采用传统连接方式与轧机紧固一体，因传动链长、固定支点多，在生产中经常出现松动、卡死等现象，诱发轧制事故。
The original guide fittings, which fixedly combined with the rolling mill, because of long drive chain and many fixed points, usually become flexible and seizing, bring on rolling accident.
工艺、设备人员经过周密准备，将再加热炉原有出料方式进行了改造，大幅度提高了轧制节奏，取得了良好的经济效益。
After preparing carefully, the former discharging method is remaked and the mill speed is greatly improved with the better economic benefit.
目前国内钼线材加工方式有两种：轧制-拉伸加工与旋锻-拉伸加工。
There are two ways of producing molybdenum wires, rolling-drawing and swaging-drawing.
本文较详细地分析了六辊轧机在不同传动方式下轧制时辊系的受力情况及其稳定条件。
The roll loads and its steady condition in 6-H mill during rolling under the different drive mode, are analysised in detail in this paper.
该设备能用来测量轧制过程带材的张力和速度，还能用其实现“S”方式轧制时对轧辊的包角调整。
Functions of the device include the measurement of strip tension and mill speed as well as adjustment of flanging the rolled piece with respect to the roll during"S"roiling.
定时方式控制是轧制节奏控制（MPC）模型的控制方式之一。
Timing mode control is a kind of control modes of the Mill Pacing Control (MPC)model for Bao Steel 1580mm hot rolling mill.
轧制力矩过大是轧机主传动系统传动轴断裂的主要原因，传统的电机电流过载保护方式不能真实反映轧机主传动系统扭矩的动力学特性。
The breakdown of transmission shaft in the main drive system is due to too high roll torque. Overpower protection mode of motor current does not reflect the true dynamic character of roll torque.
本试验采用不同包铝方式，不同加热时间，不同轧制道次和道次压下量的安排进行研究。
Various alclad, heating time, rolling pass, reduction is used in the test, and compared surface quality with rate of finished product after rolling.
对比分析了它们各自的工艺特点，着重探讨轧制-拉伸加工方式在产品质量、成本控制、生产效率等方面的优越性。
Their technological characteristics are analysed, and the great advantage of rolling-drawing in the areas of quality, cost control and productivity are especially investigated.
研究了采用熔体发泡法制备的闭孔泡沫铝材料的轧制过程，分析了不同道次压下量条件下泡沫铝的变形特点与破坏方式，探讨了影响泡沫铝轧制能力的主要因素。
The rolling process of closed-cell aluminum foam that was prepared by melt-foaming process was studied, as well as its deformation and failure behavior due to different pass reduction.
台阶截面环件轧制作为火车轮、自行车圈、轴承环、管道法兰盘、管道联接件等部件的主要生产方式，应用极广。
As train wheels, bike rims, bearing ring, piping flange tray and piping link piece etc, ring with outer stepped is applied widely.
以动画的方式模拟轧制过程，给出了一种预测轧制结果、减少实验时间和费用的有效方法。
The results above were expressed in computer animated way. An effective approach to predict rolling results and to reduce test t…
作者采用考虑了弹跳因素的轧制力迭代方式计算了中轧以后各机架的轧制力及轧制尺寸。
The rolling force and the product dimension of each stand were calculated by the reiterative method considering spring value. It was proved that the dimension variation of rough...
作者采用考虑了弹跳因素的轧制力迭代方式计算了中轧以后各机架的轧制力及轧制尺寸。
The rolling force and the product dimension of each stand were calculated by the reiterative method considering spring value. It was proved that the dimension variation of rough...
应用推荐