设计了一种满足超声波振动镗孔要求的镗刀。
The boring cutter for ultrasonic torsion vibration boring holes is designed and the technique of design is discussed.
介绍一种新的气体超声波振动电火花加工方法。
A new method of ultrasonic vibration electrical discharge machining in gas is proposed in this paper.
其结果，超声波振动不传递到手指，能防止被灼伤。
As a result, the ultrasonic vibration cannot be transmitted to the finger thereby to prevent the same from a burn.
在加工过程中，通过超声波振动，工件加工工艺得到改善。
During machining, ultrasonic vibration of workpiece can improve the machining process.
本文对在淬火油槽内用超声波振动提高油冷却能力的试验进行了研究。
This paper deals with the experimental study of improvement on the oil cooling ability by producing ultrasonic wave vibration in the quenching oil trough.
介绍了超声波振动拔管的原理，以及超声波振动拔管换能器的设计情况。
The paper covers information regarding the working principle of the ultrasonic vibration pipe-drawing process and the design of the energy transducer as well.
研究结果表明，采用超声波振动处理的方法，可显著地降低铸锭内的含气量。
The results were attained in the experiments: by using the method of ultrasonic vibration treatment, the value of porosity volume is decrease obviously.
本文以超声波振动切削为例介绍了超声波振动加工中自动调谐技术的实现方法。
Taking ultrasonic vibration cutting (UVC) as an example, this paper puts forward a method of tuning automatically for ultrasonic vibration machining (UVM).
用筛分通过率表示，一般情况下比不加超声波振动筛增加通过率50%—400%。
In screening pass rate, usually passing rate of 50% - 400% more than without ultrasonic vibrating screen.
本文对超越性现象产生的条件、规律进行了试验和理论分析，丰富了超声波振动切削理论。
In this paper, the experiments and theoretical analyses are made about the occurring conditions and regularities of this phenomenon, which enriches the ultrasonic vibration cutting theory.
介绍了基于超声波平行轴珩齿的超声波振动系统的设计原理，重点介绍了确定各组成部分参数的方法。
This paper introduces the design principle used for ultrasonic parallel-axes honing, the key is to confirm the parameter of every part.
爱因斯坦也无法知道由盘型传感器产生的超声波振动能将空中这些玻璃微珠钳除，再在它们悬垂在空中移动时进行测量。
Nor would he have known that ultrasonic vibrations from a plate-like transducer would shake those glass beads into the air to be tweezed and measured as they moved in suspension.
从切削运动、切削量、磨粒性能三个方面分析了超声波振动珩磨的切削机理，并归纳了超声波振动珩磨的特点。
The cutting principles including cutting motion, cutting quantity, and grain performance of ultrasonic vibration honing are analyzed, and its specialities are generalized.
采用油作为加热介质对焊锡进行加热，再通过超声波振动去除电路板上的焊锡，从而把电路板上的元器件拆卸下来。
Using oil as heating medium to heat soldering tin, then disassemble it by ultrasonic vibration and consequently disassemble the PCB's components.
论述超声波振动珩磨振动系统的原理，通过振动试验分析振动系统中的变幅杆、弯曲振动圆盘、振动子系统的振动效果。
The principle of vibration systems of ultrasonic vibration honing are discussed. The vibration effect of horn, curved vibrating disc and child system are analyzed by experiments.
基于超声波传播的机理，提出了一种无需清洗液且有别于常规超声波清洗机理的超声波振动清洗方法，并阐明了选取各超声参量时应注意的问题。
A ultrasonic vibrative cleaning method is introduced and it′s cleaning mechanism is analyzed theoretically, some points for attention in choosing ultrasonic parameter are expounded.
换能器由阵列微压电结构组成，这种压电材料在合适频率下的振动能够将电信号转换成超声波。
Transducers are made from arrays of tiny piezoelectric structures that convert electrical signals into ultrasound waves by vibrating at an appropriate frequency.
本文介绍了超声波电机振动模态形式及其选择的原则。
The selective principle of ultrasonic motor's vibration mode and the form of resonance mode are introduced in this paper.
超声波马达是一种由超声振动而获得驱动力的新型电机。
Ultrasonic motor is a new type of electric machine driven by ultrasonic vibration.
柱体型超声波电机依靠圆柱定子的弯曲振动驱动转子旋转。
The cylindrical type ultrasonic motor USES bending vibration of cylindrical stator to drive rotor.
将超声波变幅杆与弯曲振动刀杆作为一个系统加以研究。
The ultrasonic horn and bending vibration cutter are studied as a system in this paper.
本文提出了一种用于分析环形超声波电动机定子振动固有频率的简便、有效的方法。
The paper puts forward a convenient and efficient method on the analysis of vibration natural frequency for ring ultrasonic wave motor stator.
根据弱刚度零件端面切削实验，研究了超声波椭圆振动切削对弱刚度零件的切削效果。
Based on experiments of the face cutting of the weak workpiece, effects of the ultrasonic elliptical vibration cutting on the weak workpiece are researched.
振动模态选择是超声波电机设计的重要环节，也是影响电机性能的重要因素。
The selection of vibration mode is very important during the design of ultrasonic motors. It is also a significant factor infecting motor's performance.
金属的超声波检验就是把超声振动施加于弹性材料上，并观测该振动内部所产生的作用。
The ultrasonic metal inspection is the application of ultrasonic vibrations to materials with elastic properties and the observation of the resulting action of the vibrations in the materials.
混响消减相关技术还可应用于地震数据分析、超声波检测、生物医学、振动声学、雷达声呐等其它方面。
This technology may also find applications in various aspects like seismic data analysis, ultrasonic measure, biomedicine, vibration acoustics etc.
本文对超声波纵向振动内圆磨削系统进行了系统的研究。
The ultrasonic vibration hole grinding system has been studied in this paper.
介绍了利用超声波在液体介质中传播，使质点产生强烈振动而引起交变压力的原理。
It introduced the principle of alternating pressure caused by particle vibration, when ultrasonic propagating in liquor medium.
介绍了一种复合型超声波电机的振动设计理论，这是超声波电机设计理论中的一个重要部分。
A vibration design theory is introduced in this paper, which is an important part of the theoretic of ultrasonic motor.
介绍了一种复合型超声波电机的振动设计理论，这是超声波电机设计理论中的一个重要部分。
A vibration design theory is introduced in this paper, which is an important part of the theoretic of ultrasonic motor.
应用推荐