采用该技术条件能得到具有独特风味的高质量产品。
The high quality product with unique flavor was obtained using the above technical conditions.
供应的国产部分应符合本地的技术条件如相关和设备的质量、数量和设计。
Portions of the supply for local manufacturing shall be in line with local technical conditions as far as the quality, quantity and design of the materials and Equipment are concerned.
另外业主还提出了额外的技术条件以确保施工标准和质量。
Furthermore the Employer has provided additional technical provisions in order to ensure the standard and quality of the construction.
现代科学技术的成果在医学领域的广泛应用，为人类生存条件的改善和生活质量的提高作出了巨大贡献，但同时也导致了医疗费用的高速上涨。
Widely use of modern technology in medical field not only make contribution to improve human life condition and quality of life by also sharply increase the medical care expenditure.
多媒体技术正在以其独特的优势逐渐走进课堂，为提高教学质量创造了条件。
Multimedia technology is gradually walking into classroom with its unique advantage and it supplies good conditions to raise teaching quality.
以上数据因企业的生产条件、所使用原燃料的质量、原有技术水平和管理水平的不同而有所偏差。
Due to different production conditions, quality of applied raw fuel, and original technical level and management level of the enterprise, the above data will be different.
针对工程实践，简要介绍斜拉索制造的技术条件、原材料、生产工艺、质量保证体系等。
The system of quality control, production technology, raw materials and the technical conditions of the cable manufacture in this engineering practice are presented.
阐述了绿色食品（蔬菜）基地的环境条件与生产过程的环境效应，绿色食品生产的综合技术，其产品质量的监督检验及其生产技术体系。
This article discusses the environment conditions and effects of green produce center, the comprehensive production technology, the supervision of produce quality and the technical system.
论述了油气管道质量、安全性与寿命、失效模式、相关工程判据(评价与控制的指标体系)及技术条件的相关关系。
The present paper deals with the relationship between the quality, safety and life, failure modes, related engineering criteria and technical requirements of oil and gas pipeline.
因此，研究在海空复杂背景条件下的目标识别技术，对获取高质量海面目标信息具有非常重要的意义。
Therefore, researching the target identification technology in the sea and air conditions is very important for getting target information with high quality.
介绍了氰化亚金钾的生产工艺过程、技术条件及所用原料和产品质量情况。
Have introduced the production technology course, technological condition and raw materials and product quality situation used of the inferior gold potassium of cyaniding.
分析主要有三方面影响因素：生产管理体制、生态条件和栽培技术措施影响原料质量和产量。
The analysis has primarily three aspect influencefactor:Production control system, ecosystemterm with cultivation technique measure influenceraw material quantity with the yield.
结论：CLEAR技术在脊柱mri检查中在其它成像条件不变的情况下，可以大大提高图像的质量。
Conclusion: the CLEAR technique could improve the image quality highly in vertebral column MRI examination, while the other image conditions were unchanged.
结果：临床路径管理的关键环节包括操作技术、支持条件、激励机制和质量监管等方面。
Results: the key sectors of clinical pathway management should include the health technology, supportive conditions, incentive mechanism, and quality supervision, etc.
型焦技术是合理利用非炼焦煤资源或扩大煤焦煤资源的有效途径，工艺条件对型焦质量影响很大。
The technology of formed cokes is an effective way for making rational use of noncaking coal resources or extending coking coal resources.
并且使上述两种技术在运用中相互创造有利的反应条件，节约了处理成本，也大大提高了无害化质量。
Moreover, the treatment method makes the two types of technology mutually create favorable reaction conditions during application, saves the treatment cost, and greatly improves the innocent quality.
安装工程开工前的技术准备工作非常重要，它是保证工程进度、工程质量、降低工程成本、搞好现场HSE管理的先决条件。
Technical preparation work is very important, and it is a precondition of ensuring project progress and quality, decreasing project cost and offering good field HSE management.
对于焊接过程中常出现各种干扰，焊接条件时有变化的TIG自动焊而言，改进传感方法和控制技术是提高焊缝质量闭环控制系统控制效果的两大途径。
Due to changing welding condition caused by interference in TIG welding process, to improve the sensors and its control is two ways to promote accuracy of closed-loop control of welding quality.
合同标的的技术条件、质量、标准、规格、数量。
Technical conditions, quality, standard, specification and quantities of the subject matter of the contract.
依据图像恢复技术的要求，高精度成像系统调制传递函数(MTF)是高质量图像恢复的基本条件。
According to the requirement of image restoration technique, high precision modulate transfer function (MTF) of imaging system is the base of high-quality imagery restored.
初步探讨了GIS技术在大气质量模型建模过程中在定义边界和初始条件、数据准备、模型运行处理、可视化结果表现等方面的应用。
The application of GIS technology to the process of atmospheric pollutant dispersion modeling were discussed, including boundary definition, initial state, data preparation and result visualization.
本文根据四大干线的技术条件，论证了提速客货列车的牵引质量，运行速度，行车密度间的合理匹配。
Based on the technical conditions of the four major trunk lines, this article demonstrates the rational match between hauled weight, operating speed and traffic density.
采用了高质量焊接材料和适当的焊接规范参数范围，焊接工艺评定试验结果完全满足产品制造技术条件要求；
High quality welding material and suitable welding parameters were used for the welding procedure qualification test results fully meeting the requirement of the product manufacturing specification.
本文着重论述了近年来在混合造粒技术机理方面的研究进展，特别是粘结剂对于成粒过程和产品质量的影响，并对造粒过程中的控制条件优化进行了评述。
The mechanisms of multi-component, especially the influences of binder on the product and the process of granulation were reviewed and the conditions of controlling were compared and predicted.
论述从模具设计到成品加工过程中，实现省喷涂显示器前框塑料件的技术条件，并着重讨论了各工艺因素对产品质量的影响。
This article introduces the technical conditions achieving the injection moulding saving spraying of plastic bezel in the whole process from the mould design to end-product.
由于该复合加工技术有效地结合了放电加工和机械磨削加工的特点，并且二者互为有利条件，因而能高效率、高质量地加工陶瓷材料。
Proposes the electro discharge mechanical-grinding(EDMG) which combines the virtues of both EDM and grinding. It can be used in machining ceramics with high efficiency and quality.
其质量不高的原因除部分是设备和投照条件不清外，大部分是投照技术人员工作责任心不强所致。
The reasons for the low quality of film are mostly due to technician's lack of responsibility, except for unclear equipment and projection conditions.
对自然气候条件下塑木复合材料的宏观质量变化及颜色变化进行了分析，同时采用差示扫描量热技术对其热学变化特征进行了分析。
The weight and color change of wood plastic composites was analysed and the thermal characteristic was studied by using differential scanning calorimetry under natural weather.
对自然气候条件下塑木复合材料的宏观质量变化及颜色变化进行了分析，同时采用差示扫描量热技术对其热学变化特征进行了分析。
The weight and color change of wood plastic composites was analysed and the thermal characteristic was studied by using differential scanning calorimetry under natural weather.
应用推荐