主要介绍长春地区负荷控制系统。
The load-control system developed for Changchun area is introduced.
本文介绍了一种新型电力负荷控制系统。
In this paper, a new electric power load control system is introduced.
实际运行证明，自动变负荷控制系统运行效果较好。
The practical operation proves that the automatic variable-load control system works well.
本文主要论述了球磨机负荷控制系统数学模型的建立与应用。
The research and application of the load-control system were studied in this article.
根据形势的需要，重庆市电力负荷控制系统改造成重庆电力负荷管理系统。
According to the need of situation, Chongqing electric power load system was reconstructed into Chongqing electric power management system.
将该控制器应用于锅炉的单元机组负荷控制系统中，实现了对非线性和大时滞系统的自适应控制。
While the controller is applied to controlling system about unit load of boiler, adaptive control of nonlinear big-lagged system is realized.
电站负荷控制系统的数字仿真表明，该控制器具有良好的控制效果，使负荷控制和汽压控制系统间耦合大大减小。
Digital simulation test for the coordinated control system shows that this controller has better control effect, and the load control system and steam pressure control system are well decoupled.
如何降低甩负荷时汽轮机组的动态超速始终是汽轮机控制系统设计的重要任务之一。
How to decrease the overspeed while the steam turbine suddenly lose full load is one of the important problems to design the control system of the steam turbine.
应用该算法可以克服锅炉的大迟滞和大惯性，能够有效地提高协调控制系统响应agc负荷指令的速率。
Not only it, but also this algorithm can overcome the large lag and inertia for boiler and heightening the responding rate to AGC in boiler-turbine coordinated control system in effect.
电厂负荷和发电机控制系统的复杂性限制了精确解析方法在励磁涌流研究中的应用。
Because of the complexity of the load and the control systems, the quantitative analysis method is not suitable for the problem solving.
煤气冷凝鼓风机组技术改造选用D750 -28型鼓风机，采用增速型液力偶合器调节负荷及计算机控制系统。
In a coal gas blower set for condensation were incorporated D750 28 blower and speed up hydraulic coupler to adjust load as well as computer control system.
提出了一个实现大范围负荷跟踪的火电单元机组智能控制系统。
This paper proposes a power unit intelligent control system implementing wide range load tracking.
在电厂机组运行中，其主要辅机故障脱扣，自动控制系统能快速、安全降负荷并稳定机组运行。
In operation process of the power plant, when the trip trouble happened in its main auxiliary units, its automatic control system can lower the load quickly and safely.
文章设计了基于动态负荷预测的矿用井下皮带输送机控制系统。
An control system of underground belt conveyer is developed on the specific condition in mine based on dynamic load forecasting.
介绍了一种微机双绕组变压器负荷经济运行控制系统的基本工作原理、硬件结构框图和主要技术特点。
The basic working principle, hardware structure and main technical features of a micro computer based control system for transformer economic operation is presented in this paper.
文章针对单元机组负荷控制的特点，采用最优预见控制（OPC）策略设计了基于多变量预见控制原理的单元机组负荷最优预见控制系统，并讨论了预见步数对控制品质的影响。
This paper designed a multivariable load Optical Preview Control (OPC) system for a thermal power unit, and discussed the effect of preview step number on control performance of the load OPC system.
汽轮机和锅炉响应外界负荷变化的动态特性不同，要求控制系统必须很好地协调机炉两侧的动作。
Due to the different dynamic characteristics of turbine and boiler responding to load variation, their coordination through the control system is essential.
其次对模糊理论及模糊控制进行了综述，接着介绍了电解清洗线计算机控制的系统设计，并设计了刷辊的电流负荷模糊控制系统。
Secondly, fuzzy theory and fuzzy control is introduced generally. Then, the computer control system of electrolytic cleaning line and brush roll motor current load fuzzy control system are designed.
实践证明，该方法简单易行，解决了控制系统中负荷分配不均的问题。
The practice showed that this method was simply practical and overcome the variance of load distribution.
介绍了仪表控制系统的供电原则及仪表控制系统的负荷分配方案。
This article introduces the instrument control systems power supply and its relative load distribution plan.
高纯盐酸控制系统能实现自动点火，自动调节生产负荷， 在线控制产品质量，自动联锁保护等优点。
This system can make automatic ignition, automatic interlock, automatic regulate work load, meanwhile it can control the product's quality.
该项研究对操纵负荷系统的性能分析及利用PID控制方案设计控制系统具有一定的参考价值。
This study provides a reference for analyzing performance of control load system and applying PID control project to design control system.
结果表明：在大范围的负荷变化时，控制系统仍具有满意的控制效果。
Results show that the proposed algorithm exhibits satisfying control effects even for large load varying ranges.
本文主要研究和设计了冷轧带钢电解清洗线上刷辊马达电流负荷控制的模糊控制系统并做了建模与仿真。
This paper mainly researches and designs fuzzy control system used in brush roll motor current load control and establishes its object model successfully used in simulation in the lab.
动力堆控制系统是一带不确定参数及干扰的复杂非线性系统，采用常规的古典控制很难保证其热功率精确跟踪负荷的变化。
The classical control method is usually hard to ensure the thermal power tracking accuracy, because the nuclear reactor system is a complex nonlinear system with uncertain parameters and disturbances.
对原协调控制系统作了较大的修改，采用了“智能化”变负荷控制策略，使变负荷快速、准确和稳定。
The original coordinated control system was modified greatly, and the "intellectual" control strategy for load change was adopted to realize quick, accurate, and stable load change.
通过对建筑物动态负荷与小型吸收式制冷机制冷量之间关系的研究，开发了基于PID控制器的小型吸收式制冷机变水温控制系统。
The variable water temperature control system that based on PID controller was studied to deal with dynamic space load and refrigerating capacity of SAAC.
通过对建筑物动态负荷与小型吸收式制冷机制冷量之间关系的研究，开发了基于PID控制器的小型吸收式制冷机变水温控制系统。
The variable water temperature control system that based on PID controller was studied to deal with dynamic space load and refrigerating capacity of SAAC.
应用推荐