所述的电动机由调速器控制转速。
The rotating speed of the electric motor is controlled by a speed governor.
频率信号是水轮机调速器控制系统基本的输入量。
Frequency signal is a primary input to hydro turbine governor control system.
多年来用调速器控制速度是唯一控制系统频率的措施。
For many years governor speed control was the only available means of controlling system frequency.
多年来用调速器控制速度是唯一控制系统频率的措施。
Research on the AC Speed Regulation Controller for Cranes Control System;
该机床直接用电主轴驱动主动轮带动锯丝运动，由变频调速器控制锯丝的速度。
The driving wheel was driven by a electric spindle, and the cutting speed was controlled by converter governor.
用数学的方法对数字式电子调速器控制柴油机转速的调节过程进行了描述与分析。
Regulation process of digital governor system used to control diesel engine is described and analyzed by way of mathematics.
本文在考虑发电机最优励磁控制的基础上，进一步加入调速器控制，构成励磁与凋速器的综合最优控制。
This paper bases on the optimal excitation control of generator, adding the governor control, the excitation and governor comprehensive optimal control has been built.
介绍WOOD W ARD505型电子调速器控制功能，分析调速系统在运行中出现问题，提出解决办法。
Presents the control functions of WOOD WARD505 electric speed adjuster, analyzes problems existed in speed adjust during operation and puts forward relative solutions.
本文从感应电机的静态特性出发，分析了通用电压矢量控制变频调速器的制动功能。
Based on the static characteristics of induction motor, this paper analyzes the braking function of general voltage vector controlled frequency converter.
通过建模、仿真及现场试验，提出了机组并联于大电网工况下的调速器PID参数整定范围和应有的机组功率控制模式。
On the basis of modeling, simulation and field test, proposed are the PID parameter setting range of the governor under the large grid operating condition, and the power control mode of the unit.
通过PLC实现，表明用模糊-PID控制理论构筑的调速器其有适用性广，可靠性高的优点。
The experiment with PLC shows that the governor with Fuzzy-PID control has such advantages as wide adaptability and good reliability.
水轮发电机组的负荷控制主要通过对调速器的控制来实现的。
Load regulating of power generator is always finished through the regulating to the regulator.
采用直流调速器和可编程控制器的结合来实现飞锯机模拟。
In this system, the PLC and the DC speed-regulator are combined to simulate the operation of flying saw machine.
船舶主机的调速器主要采用比例积分微分(PID)控制规律。
Most of speed controllers of main engine in ship use PID control method.
用TPY3系列调速器对牵引机的速度进行闭环控制，提高线速度的稳定性，从而提高生产效率和产品质量。
TPY3 series speed-adjusting system can realize closed loop control to speed of traction machine, the stability of line speed is increased, so production efficiency and product quality are improved.
本文介绍了一种基于8098的双神经元预测调速器，包括它的控制算法以及电气部分和液压部分的工作原理。
This paper presents a double-neuron predictive governor based on 8098 microprocessor including its control algorithm and operational principle of electric part and hydraulic part.
利用该模型可分析各参数对发动机控制的影响进行仿真，并利用仿真的结果指导6105Q柴油机数字式电子调速器的参数整定实验。
By this model, simulation about speed regulation of 6105Q diesel engine is made. Based on the result of simulation, the control parameters are got by experiments.
针对常规pid控制器在水轮机调速器不能在线进行参数自整定的问题，结合模糊控制技术，提出了PID参数模糊(FUZZY)自整定。
Aiming at the problem that conventional PID controller of water turbine regulator can not on_line identify and decide parameter itself, FUZZY PID is proposed by combining with FUZZY control technique.
调速器的一个神经元在线预测对象动态特性，另一个神经元在线控制对象。
In the governor, one neuron predicts the plant dynamics online, another controls the plant online.
针对柴油机数字式电子调速器的特点，设计了一种转速模糊控制算法，并在以16位嵌入式单片机为核心的柴油机数字调速系统中实现了这种算法。
According to the feature of the diesel digital speed control system, a FLC algorithm is (developed) and realized in the diesel speed control system based on the 16-bit embedded microcontroller.
控制器：最高效率脉宽调制电子调速器。
Controller: Pulse Width Modulation electronic speed control for highest efficiency.
本文提出把模糊pi调节用于水轮发电机组的调速器，并研究发现不同的过程有不同的模糊控制规则。
In this paper, fuzzy PI control is introduced into the governor of hydro turbines and different fuzzy control rules are suggested for different processes.
介绍在烧结机环冷余热回收工艺中应用小型DCS、PLC与变频调速器所构成的控制系统。
The control system for heat-recovery process from circulating cooling of sintering machine is introduced. In this system small- sized DCS, PLC and variable frequency speed adjuster are composed.
采用具有全程调速器的内燃发动机、发电机、逆变弧焊电源，以及二次控制系统构成发电电焊两用机。
Generating and welding dual use set consists of generator, welding inverter, automatic control system, and internal-combustion engine controlled by speed regulator.
本文主要研究了交流变频调速器的网络控制功能。
The paper researches primarily the network-control function of inverters.
现代水轮机调速器的主要功能是起机组频率调节器和机组功率控制器的作用。
Main functions of the governing system are following: frequency regulation while unit isolating from power system, power control while unit operating in power system.
通过对机械式离心调速器系统增加一个延迟反馈控制器，利用它控制系统从混沌运动转化为周期运动。
A method of controlling chaos by employing a delayed feedback controller is developed to guide chaotic motions towards regular motions.
本课题研制电子调速器来控制汽油发电机转速，以降低转速超调，提升发电机性能。
This study develop a Digital electronic governor to control rotate speed of Petrol generator in order to reduce rotate speed fluctuate, improve it's performance.
本课题研制电子调速器来控制汽油发电机转速，以降低转速超调，提升发电机性能。
This study develop a Digital electronic governor to control rotate speed of Petrol generator in order to reduce rotate speed fluctuate, improve it's performance.
应用推荐