探讨了扫描面位置误差的补偿方法。
这里还详细讨论了砂轮尺寸误差的补偿方法。
In this paper Compensation method of wheel sige deviation is discussed in detail.
在此基础上，进一步提出了自由曲面测量误差的补偿方法。
On the basis of above research, the measuring error compensation method for free-form surface is proposed.
利用机构误差的分析和检定技术，完成非实时误差的补偿。
The error analysis and testing techniques were used to complete the non- real-time error compensation.
讨论了超宽带收发系统的误差，并提出了收发系统误差的补偿方法。
An error compensating method is put forward after the UWB transmit-receive 'system error being discussed.
通过补偿机床螺距和丝杠间隙误差，实现了机床线性定位误差的补偿。
The lin ear positioning errors are compensated by the compensation of the thread pitch a nd thread clearance in the machine tools.
通过分析计算数控铣削过程中刀具变形引起的误差，提出对这种误差的补偿方法。
Through analyzing and accounting evocable error of tool's transmutation during milling process, the compensatory method to the error in NC machining has been put forward.
仿真结果表明，在高动态环境下，对划船误差的补偿提高了系统的速度解算精度。
The simulation results show that the sculling compensation term in the velocity integration algorithms can not be neglected for the high accuracy GFSINS in highly dynamic environments.
根据动力调谐陀螺与重力相关漂移项的特点，提出了双轴平台陀螺漂移误差的补偿方法。
Methods of error compensation for gyro drift of two axes platform is presented according to DTG characteristic.
该方法利用BP网络较强的非线性映射能力，网络通过学习能实现对传感器系统误差的补偿。
This method utilizes the nonlinear mapping ability of the BP neural network. By training, the BP neural network achieves the error compensation for multi sensor system.
提出了倾斜误差的检测方法并设计了检测装置，利用改进的BP神经网络模型实现了倾斜误差的补偿。
The error associating with the working distance and inclination angles is measured by using a specially designed device, and compensated via an improved BP neural algorithm.
同时还可以根据测量的体积定位误差数据生成误差补偿的代码，进而可以对其进行体积定位误差的补偿，大幅度提高了数控机床加工精度。
Meanwhile, the LDDM software can automatically generate the compensation codes according to the measured data, then these codes would be loaded into CNC controller to improve volumetric position a...
在捷联惯导数字迭代算法中，姿态算法有效处理了导航坐标系旋转的影响，利用位置矩阵求解位置的方法很容易地解决了涡卷误差的补偿问题。
The rotation effect of navigation coordinate is well compensated in SINS attitude algorithms. Scrolling error compensation can directly be used in the position matrix update algorithms.
该方法使用了时频同步跟踪环路，从数据子载波提取相位误差，并利用频域插值补偿多个用户的估计频偏。
The system uses time-frequency tracking loops to extract phase errors from data subcarriers with frequency interpolation to compensate for the estimated carrier frequency offsets.
因此，初始定向误差和陀螺漂移的影响不能忽略，必须对其进行估计和补偿。
Thus, the effects of initial alignment errors and gyro drifts can not be neglected and must be estimated and compensated.
但是帧1中经过运动补偿的像素具有子像素位置误差。
But the motion compensated pixels in frame 1 have sub-pixel positional errors.
论文将基于神经网络算法补偿传感器测量误差的方法，应用到水利测量技术中。
The method which sensor error is compensated with the artifical neural network algorithms is applied to the hydraulic measurement technique.
本文主要阐述了称重传感器的工作原理、误差补偿、主要参数选择。并进行了技术经济性分析。
This text has mainly explained and weighed the working principle of the transducer, the error compensating, the main parameter choosing, and has carried on technological economy analysis.
假如参考端温度的变化没被补偿，就会有相应的毫伏电压变化，结果会导致温度测量的误差。
Should there be an uncompensated variation in the reference junction temperature, there will be a corresponding change in millivolt with a resultant error in temperature measurement.
阐述基于模糊优化算法的导航系统惯性元件误差补偿方法。
The method of error compensation for inertial elements in navigation system based on fuzzy optimal algorithm is presented.
当在传感测量中加入平移系统误差时，该方法的补偿精度不变，而传统标定方法的测量精度明显下降。
But compensated precision isn't changing, when there is transferring system erros the measuring precision of the traditional calibration method is apparently descension.
采用WINCC设计测长监控与显示程序，并利用误差补偿技术及完善的软件设计方法，保证了测长系统的高效准确。
The programs for monitoring and displaying are designed using WINCC. The methods for improving efficiency and precision by error compensation and perfect software design are adopted.
提出基于新天线阵的补偿方法，理论上可以完全消除整个测向机的系统误差。
A proposed relevant compensate method can counteract all system errors of the whole Direction-finding machine in theory.
根据误差模型及系数，采用软件进行误差补偿，有效地提高了测角系统的精确度。
The accuracy of angular displacement was increased greatly by software error compensation according to the error model and parameters.
深入分析了引起系统测量误差的原因，并利用神经网络对线结构光测量系统进行误差补偿，提高了系统的测量精度。
The reason that caused measurement error is analyzed deeply. The paper makes use of the neural network to compensate linear structured light measurement system, so improve the measurement precision.
现有的密度补偿模型不适合高温高压饱和蒸汽的流量测量，密度补偿精度较低，导致蒸汽流量测量误差较大。
The existing density compensator model does not fit high temperature and pressure saturated vapor, the density compensator precision is low and causes big error in saturated vapor measurement.
针对感应同步器测角系统，提出了一种自动检测测角误差、辨识误差模型系数和补偿误差的方法。
A method that measuring angular displacement error, identifying parameters of error model and compensating error automatically was put forward based on inductosyn angular measuring system.
分析计算了精密测量中温度误差的影响，讨论了减少和补偿温度误差的方法，并就仪器温度误差的建模问题进行了探讨。
This paper analysed and calculated the thermal effects on precision measurements, discussed methods for reducing and compensating thermal errors and then goes further into the model construction.
分析计算了精密测量中温度误差的影响，讨论了减少和补偿温度误差的方法，并就仪器温度误差的建模问题进行了探讨。
This paper analysed and calculated the thermal effects on precision measurements, discussed methods for reducing and compensating thermal errors and then goes further into the model construction.
应用推荐