分析了俯仰角、偏摆角的误差分离和实时测量原理。
由数据处理软件完成数据的处理、误差分离与修正等功能。
The data processing softwares finish data processing, error separating and revising and so on.
实际分离实验结果验证了误差分离实验装置的有效性与可靠性。
The validity and reliability of the facility is verified by the actual error separation result.
详细推导出三测头误差分离原理用于测量工件圆度误差的数学公式；
The mathematical formulas for roundness measurement has been descussed firstly based on the tri-probe error separation technique.
提出了多位法误差分离技术读数方程，可统一现行的多步法和多点法。
The measurement equation for multi position error separation technique is put forward, and the equation is universal for all the current multi step and multi point methods.
此方法对平台系统或位置捷联系统的误差分离具有较重要的参考价值。
These methods are very helpful to error separation of inertial platform systems or Position Strap-down systems.
提出了“基于付立叶变换的快速误差分离方法”，并建立起相应的数学模型。
A rapid error separation method based on Fourier transform "is proposed, and corresponding mathematic model is also established."
用三传感器误差分离技术测量形状误差时，对传感器间的安装角度要求很严。
When measuring form errors with 3-sensor technique, it is necessary to correctly set the angles of sensors.
采用曲线曲面匹配和误差分离技术对测量数据进行处理，完成了对被测件的评价。
The part is evaluated using the techniques such as curve matching, curved face matching and error separating.
利用自律验证法对本文提出的圆柱度误差分离及重构方法系统地进行了实验验证。
The cylindricity error separation and reconstruction method proposed in this paper was systematically verified.
描述了一种在超精密磨削机床上基于误差分离法的非球面表面形状精密测量系统。
This paper describes accurate surface profile measurement of an aspherical lens on an ultra-precision grinding machine using the error separation technique.
它是在对多步法误差分离技术测量精确度进行理论分析和实验验证的研究基础上提出的。
It is suggested based on research to the accuracy of multistep er - ror separation technique by theoretical analysis and practical experiment.
加速度 表是飞行器的重要传感器之一 ，使用前需进行动态测试、误差分离和补偿。
Objective To provide the basis for medical evaluation of spacecraft, and to measure the impact acceleration of return-cabin of spacecraft.
采用误差分离技术将工件的形状误差从所测信号中分离出来，实现在线测量主轴的径向误差运动。
The profile error of workpiece is separated by error separation technique to realize the online measurement of spindle radial motion error.
本文通过分析研究领域两点法误差分离技术，建立了直线度误差分离数学模型，并进行了计算机仿真。
By analyzing error separation techniques of two-point method in frequency-domain, some mathematical models of separating straightness error are presented in the paper, and computer imitation is made.
由于工具误差分离存在着很强的复共线性，传统的最小二乘方法与主成分方法不能很好的解决这一问题。
Because the separation for GISE is an almost singular regression problem, the classic least square method and principal component method are not satisfactorily for solving the problem.
本文提出的三点式误差分离新方法用以分离旋转轴线的径向误差运动与测量介质或测量对象的形状误差。
A new 3-point error separation method is developed and used in this paper for separating the radial errors of rotating axis and the shape errors of the objects measured.
研究了在数控加工中利用误差分离技术测量线轮廓度误差的新方法，在推导数学模型基础上进行计算机仿真。
The new method of measurement profile error of any line with error separation technique is studied. Based on developing mathematical models, computer imitation is made .
由于火箭的观测设备和处理方法的误差，使数据的质量和性质存在问题，给误差分离和精度分析带来较大误差。
The errors of the rocket observation equipment and the processing method make the quality and property of the data doubtful, bringing larger errors to the error seperation and the precision analysis.
针对球度误差没有实现在位测量的问题，将圆度误差分离技术引伸到球度误差分离技术，并在理论上进行了探讨。
The error separation technique of the sphericity is derived from that of the roundness, and analyzed in theoretically, due to the lack of the on-site measurement of the sphericity.
介绍了圆度误差分离中的频域最小范数混合解，这种混合解比最小二乘解和最小均方误差解具有更好的噪声抑制效果。
A new hybrid minimum norm solution in frequency domain was also considered, which is better in suppressing the impact of noise on error separation th...
制导系统工具误差分离的工作是一个很细致又很严密的工作，为此必定要对测量数据进行检验，并寻找合适的误差分离方法。
It is necessary to check the measured data and to find a suitable error separation method for separating the instrumental error of guidance system.
在超精密加工中，用多测头方法测量工件直线度时，需要采用误差分离的方法分离出溜板的运动误差，并用一定的算法重构工件表面的直线度。
In ultraprecision machining, multi probe methods are widely used for measuring the straightness error of the workpiece to separate the straightness motion error of the carriage.
本文分析了影响纳米三坐标测量机测量精度的误差源，建立了纳米三坐标测量机的误差模型，并针对不同的误差源提出了相应的误差分离方法。
This paper analyses the influences of every error source of the precision of CMM. Establish the error model of CMM, and design different method of error calibration for different error source.
在对管切割中影响尺寸精度和相贯线形状的误差源进行分析的基础上，提出了一种示教再现的误差补偿切割方案，并建立了相应的误差分离模型。
Based on analysis of error sources which influence pipe-cutting precision, a scheme of teaching and reappearing cutting is advanced and the corresponding error separating models are founded.
将这些误差进行分离，可以指导仪器的的校正；
Separate these errors, the instrument can be revised properly.
本文探讨了主轴回转误差运动中偏心分量的分离问题。
In this paper further study is given to separate the eccentricity from the rotation error of a spindle.
最后给出了分离多阶确定性误差的通式。
At last, the general equation for separation of high order definite error is also presented.
本文通过动态测试数据处理来分离测量结果、系统误差和随机误差。
This paper discusses a method to separate -measurement result from systematic error and random error by processing dynamic measurement data.
本文通过动态测试数据处理来分离测量结果、系统误差和随机误差。
This paper discusses a method to separate -measurement result from systematic error and random error by processing dynamic measurement data.
应用推荐