螺旋锥齿轮误差修正试验研究。
Experimental study on the error correction of spiral bevel gear.
分析了误差来源，讨论了误差修正方法。
第二节介绍了向量误差修正模型(vec)。
Section II describes the vector error correction model (vec).
理论推导出光纤横向效应所带来误差的误差修正公式。
Theoretically the error correction formula caused by the crosswise effect of the optical fiber is deduced.
差值法与比值法对不同测量系统的误差修正效果不一样。
In different measurement systems, the error correction effect is also different for the difference method and the ratio method.
文章的最后还简要地介绍了该系统所采用的误差修正技术。
Finally the error correcting technique used in this system is briefly discussed.
误差修正模型是影响箭载GPS定位精度的关键问题之一。
Error correction models are a key factor of influence for the positioning accuracy of GPS receivers on-board rockets.
使用计算机误差修正技术，又进一步提高了仪器的测角精度。
Applying computer error revision technique, the instrument can obtain higher measure accuracy.
初步进行了热轧圆钢直径测量的误差修正实验，得出了若干结论。
The error correction experiment for the hot bar diameter measurement has been performed, and several conclusions are obtained.
以传感器误差修正为例，介绍了该方法在测量数据处理中的应用。
Taking error modification of a transducer for instance, the application of the method is introduced in the field of measurement data processing.
一般常用电波折射误差修正方法存在计算复杂且不具有实时性缺陷。
Radiowave refractive errors correction methods have defect of computing complexity and no real time in common use.
因此要提高GPS的定位导航精度，就必须进行电波折射误差修正。
The refraction error is produced. The radio wave refraction correction for improving the accuracy of GPS navigation and location is necessary.
实测数据计算结果表明，选优后的误差修正模型可有效提高目标定位精度。
Computation results with flight experiment data indicate that the error correction models effectively increase rocket positioning accuracy after optimization.
结合机床调整参数、齿轮啮合原理，建立了螺旋锥齿轮齿面误差修正模型。
The error correction model of tooth surface was established by machine tool adjustment parameters and meshing principle.
论述了大型内球面直径在线测量的原理、测量系统的组成及误差修正方法。
The paper discusses the principle of internal sphere diameter measurement on line, composition of the measuring device and the method of the measurement error correcting.
提出了一种在智能仪器中用补偿函数实现非线性误差修正和标度变换的方法。
A method to realize non linearity correction and scale transformation with compensation function used in intelligent instrument is presented.
最后以测杆弯曲的修正为例，对多坐标测量机的系统误差修正作了初步探讨。
Talking the modification of measuring bar bend as an example the author discussed the system error modification of the multi-coordinator measurers.
通过建立误差修正模型发现：人民币汇率错位自修正机制存在，但功能较弱。
By the error - correction model, the study shows: there exists the malposition error - correction organism of RMB 's rate of exchange, but it functions weakly.
提出了一种基于支持向量回归机(SVR)的三轴磁通门传感器误差修正方法。
An error correction method for three axial fluxgate sensor based on support vector regression (SVR) is proposed.
运用扩展的生命周期模型，我们进一步证实了我国居民消费存在明显的误差修正行为。
Adopting a extension form of life cycle model, we further confirm that consumers' spending exhibits a error correction-type behavior.
计算结果表明，使用经各种误差修正后的测速数据参与初轨计算能有效提高定轨精度。
The result shows that using velocity measuring data after error correction in preliminary orbiting computation can effectively improve the orbit determination precision.
并根据偏心误差模型的特点，对其进行简化，得到易于数学计算的偏心误差修正模型。
Then the model was simplified considering its characteristics, and a modified error correction model was obtained which was less complex in calculation.
导出了频谱仪测量低信噪比时的误差修正公式，并用实验结果验证了理论计算的正确性。
Error correct formulae of low signal to noise ratios measurement are derived on a spectrum analyzer, the experiment results are reported to verify the correctness of theory calculation.
从误差修正模型看，误差修正项均具有反向调整能力，存在短期到长期的动态调整过程。
From the error correction model, We see that the error correction terms all have the ability to adjustment, there are short-to long-term dynamic adjustment processes.
由于采用了数字计权和数字式系统误差修正技术，仪器的精度和稳定性得到很大的提高。
Because of digit weight and digit system error modification, precision and stability of the instrument can be improved greatly.
利用误差修正技术，将系统误差修正到测量允许的范围，大大地提高了系统的测试准确度。
Error correction technique is used to make the system error within the allowed range so that system test accuracy is greatly increased.
为有效提高动态测量精度，动态测量误差修正技术已成为当今引人注目的主要技术措施之一。
Nowadays, in order to improve dynamic measurement precision effectively, the correction technique for dynamic errors has become one of the main techniques.
并运用EG两步法建立二者之间的误差修正模型，得出了进口对经济增长的短期和长期作用。
The Error Correction Model between them is built by EG two-step method with the correlative long-term effect and short-term effect on import.
利用这一方法，可以以软件方式完成噪声倍频程分析的数字计权处理，并且能够实现系统误差修正。
Using this technique, digital weight and digital system error modification for noise octave analyzer can be realized by software.
利用这一方法，可以以软件方式完成噪声倍频程分析的数字计权处理，并且能够实现系统误差修正。
Using this technique, digital weight and digital system error modification for noise octave analyzer can be realized by software.
应用推荐