本文推出章动提取角度误差信号的算法。
The algorithm of extracting angular errors through nutations was developed.
讨论了全息光学头聚焦误差信号检测的基本原理。
The principle of the detection of the focusing error signal in a holographic optic head is dis - cussed.
误差信号；
对相位舍位误差信号作了分析，得到了其频谱分布的规律。
The phase error signal due to the phase truncation is analyzed, and the regularity of its spectral lines is obtained.
分析表明：最优策略实质上是以零控脱靶作为误差信号的反馈控制。
Our mathematical analysis shows that the optimal strategy is actually a feedback control that takes zero -effect miss as error signal.
用光电容积描记器检测误差信号，用电螺管作为液压机构的推动器。
The error signal is detected by the transmittance photoelectric plethysmograph. An electromagnetic solenoid is adopted for use as the hydraulic actuator.
记录仪动态准确度的测量最好通过记录试验过程中的误差信号大小来实现。
Recorder in the process of dynamic measurement accuracy by record test best size of the error signal.
如图1 - 5所示，串模噪声是叠加到希望的输入信号上的误差信号。
Normal mode noise is detected as a peak noise or deviation in a DC signal.
传输当前块的预测误差信号和运动向量，这描述了参考画面中预测器块位置。
A prediction error signal and a motion vector for a current block are transmitted, describing the location of the predictor block in the reference picture.
不排除有个别场合，例如在讨论噪音的测量问题时，某些误差信号的随机性质不容忽略。
There will be a few occasions, such as in the discussion of noisy measurements, where the random nature of certain error signals cannot be ignored.
分析了变参数PID控制器各个参数随着误差信号的变化趋势，得到它们的关系表达式。
Analyzed the variation trend of the Variable parameters PID governor with System error, and received their expression.
本文用几何光学描述了离轴探测调焦误差信号与系统参数的关系，并与实验结果进行了比较。
Characteristics of the defocusing error signals are expressed in the terms of an off-axial detection system by geometric optics. The results are compared with experiment.
在详细地分析了系统误差信号的局部收敛性的基础上，推导出了系统误差局部收敛的充分条件。
Based on the detailed analysis of the local convergence of the system's error signals, the sufficient condition of the system error's local convergence is derived.
在预定航路基础上利用时间误差信号生成侧向机动指令，通过航路动态规划，实现对攻击时间的控制。
According to the time error, the yaw maneuvering command was generated and route dynamic planning on the basis of the pre-determined route was done to control the impact time.
即通过采用一个中间分支来解决误差信号归一化的问题，通过多径搜索来解决锁相环容易失锁的问题。
Namely the middle branch was used to solve the first problem, and the way of searching multipath was used to solve the second problem.
在光通信APT技术中，位置误差信号的提取是非常关键的一环，相应地探测器件的选择就显得至关重要。
But in the laser communication of APT technique, the position error signal's distill is very important, correspondingly, the choice of the detector seem to be to importance.
在实际工作时，考虑数据采集时所引起的误差，利用数字滤波中的程序判断法以控制误差信号在允许的范围之内。
In practice, considering the error caused by data sampling, author has made use of program judgement method which belongs to digital filter method to make error signal be within allowable scope.
该算法利用误差信号的相关值去调节步长，解决了算法收敛时间与稳态误差间的矛盾，为实际应用提供了更大的灵活性。
The algorithm utilizes the correlation of output error signal to adjust the step size, solves the inconsistency problem of misadjustment and convergence time, and allows more flexibility in using.
并分析了反射镜作用范围与需要校正的误差的关系，跟踪探测器输出误差信号与物方跟踪误差，以及与跟踪镜控制量的关系。
The relationship of the steering range of FSM and the errors corrected, the detector output and objective error, tracking control system input are analysed.
然后介绍了一种新的基于指定输入—输出空间的迭代学习控制思想，它即不需要对误差信号求导数，也不需要知道被控对象的对偶映射。
Then introduce a new theory of ILC based on prescribed input-output subspace, it requires neither derivatives of the error signals nor dual mapping.
本文根据对干扰调频制导导弹系统的欺骗式干扰机理的研究，建立了针对调频制导导弹的干扰的数学模型，并对目标方位误差信号进行分析。
This paper mainly studied the mechanism of fraudulent infrared jamming aimed at the FM guided system. We put forward the jamming signal pattern and built the mathematical model.
该非线性PID算法构造了增益参数关于误差信号的非线性拟合函数，算法能够同时保证响应速度快、超调量小以及自适应能力强的系统特性。
The nonlinear function is given by the nonlinear PID algorithm, and the algorithm can guarantee the system have the property of the fast response, a little over shot and strong self adaptive.
本文经过重新定义增广误差信号，给出了有延时情况下线性时不变离散时间单输入单输出被控对象的模型参考自适应控制系统的超稳定性设计方法。
This paper presents a hyperstable scheme for designing discrete model reference adaptive control system for lineartime-invariant SISO plant, based on a redefined augmented error signal.
从系统功能设计过程出发，在分析反馈系统工作原理及其功能角色模型构造特点的基础上，认为反馈信号在输入端可等效为正、负、零三种误差信号。
In this paper, based on the functional role model theory, the reasoning rule and the technique of FMEA, which are facing to Built in Test BI.
它能根据规则实时调整顺馈系数，使得微分顺馈作用尽可能补偿速度误差信号，提高跟踪精度，仿真结果表明，这种微分顺馈系数的实时自整定是有效的。
The adaptive adjustment of this kind of compensator makes it possible to reduce velocity error, and improve tracking performance. The simulation examples have shown its effectiveness.
提出了一种自适应变步长恒模盲均衡算法，利用剩余误差信号的自相关函数估计值作为控制步长的因子来自适应改变步长的大小，克服了恒模算法存在的固有缺陷。
A new variable step-size CMA blind equalization algorithm is introduced to conquer the defects of CMA, in which the step size is controlled by the estimation of error signal's autocorrelation.
通过测量信号在卫星和天线之间传播所需的时间，汽车的位置可以被锁定在100米误差之内。
By measuring the time required for a signal to travel between the satellites and the antenna, the car's location can be pinned down within 100 meters.
这款车将遵循差分式全球定位系统以纠正它在电离层和对流层行驶中全球定位卫星信号引起的误差。
The car will be guided by a differential GPS system that corrects errors arising in global positioning satellite signals as they travel through the ionosphere and troposphere.
这款车将遵循差分式全球定位系统以纠正它在电离层和对流层行驶中全球定位卫星信号引起的误差。
The car will be guided by a differential GPS system that corrects errors arising in global positioning satellite signals as they travel through the ionosphere and troposphere.
应用推荐