另一些观点包括制造一种检测器来试验原子核的旋转动量能否被测量出，或者运用该技术来制造超灵敏的触角。
Other ideas include building a detector to see if the spin of an atomic nucleus can be measured, or using the technique as an ultrasensitive antenna.
试验结果验证了采用非接触式光电检测技术测量中应变率材料力学性能的可行性。
The feasibility of measuring the mechanical property of material in the mid strain rate condition with the non contact photoelectric detecting technology is verified by experimental results.
为了测量笑声，他在试验对象的腹部皮肤上，特别是横膈膜位置安置了传感器，并且检测肌肉的运动。
To measure laughter, he attaches sensors on the skin of a tested subject's stomach, particularly the diaphragm, and detects muscle movements.
试验研究表明，本文提出的检测方法和系统对针尖的长度和直径测量精度均达到纺织部技术标准。
The experimental study has shown that, with the measuring method and system presented in the paper, the measuring precision of length and diameter all come up to technical standard.
目的建立一种电离测量法14 c尿素呼气试验，用于快速检测幽门螺杆菌感染。
Objective To develop a novel 14 C-urea breath test (UBT) with Geiger-Muller counters for detection of H. pylori infection.
用动态接触电阻测量系统进行了电磁继电器失效检测试验，监测了其触点闭合过程的接触压降。
The contacts voltage of counterpart contacts in the close course of electromagnetic relay is observed and recorded in its failure tests using dynamic contact resistance measurement system.
为了验证噪声检测系统的精度和可靠性，在半消声室和普通房间内，分别对标准声功率源和小型电机作声功率对比测量试验。
To verify the accuracy and reliability of the system, contrast tests on reference sound power source and small motor are performed respectively in a semianechoic chamber and a common room.
用动态接触电阻测量系统进行了电磁继电器失效检测试验，检测了其触点闭合过程的接触压降。
The contact voltage-drop of counterpart contacts in the closing course of electromagnetism relay is observed and recorded in its failure test using dynamic contact resistance measurement system.
针对不同型号的皮托管进行了较系统的试验，旨在研究检测杆和安装角对皮托管测量的影响。
Aiming at investigating how the air horn and mounting angle affect a Pitot tube measurement, experiments were carried out on various Pitot tubes.
文章通过在转油站试验应用YSL-1G新型含水分析仪，检测其对不同原油含水率测量的准确度，并进行了综合评价。
The article carried out comprehensive assessment on the metering accuracy for the oil with different watercut using the new Type watercut analyzer YSL-1G on the experimental oil transmission station.
试验结果表明，采用以上这些方法在低信噪比强窄带干扰情况下，对于LF M信号具有较高的正确检测概率及参数测量精度。
The experiment result proves that high detecting probabilities and parameter measuring accuracy can be obtained by these methods under low SNR and strong narrow jamming conditions.
分别采用有限元分析和试验标定法对支撑鼓泡塔的悬挂系统进行检测，结果表明微位移的测量方法准确、可行。
The Finite Element Analysis and experiment method were applied respectively to validate the veracity of the micro-displacement method. And the results show that this measurement method is feasible.
通过试验分析证明，可以用单一标样校准检测线，并用于测量较宽范围的氮含量。
By the test analysis, it is approved that using a single standard can calibrate the detection line, and this single standard can also be applied to measure the nitrogen content in the wider range.
试验分析表明，测量精度达到设计要求，实现自动检测纤维根数和计算线密度值。
Test result proved the precision of the equipment. It realizes measuring numbers and counting linear density of fibers automatically.
将转角传感器测量曲率半径方法应用于板材滚弯加工过程的成形检测之中，论述了采用转角传感器测量板材曲率半径的原理及其测量方法，通过试验研究分析得出该测量方法的优越性及造成测量误差的主要原因。
In this paper the method of volving angle sensor measurement of curve radius is used to examine the plate forming curve in the process of forming and its′ principle and methodology is explained.
试验结果表明：器件噪声测量可以应用于故障器件的不解体检测。
This approach can locate fault components in fault device and compare input-resistances values of the amplifier by analyzing measured noise power-spectrum.
对多次火炮试验获得的炮弹运动图像检测结果表明，研究的图像提取算法简单易用，通用性较强，提高了参数测量的精度。
The test result for shell movement images obtained indicate that, the image extraction algorithm is easy to use and universal, the precision of data measurement is increased.
本发明公布了一种飞机驾驶杆力测量组件及其测量方法，属于航空工程试验检测领域。
The invention discloses an aircraft driving lever force measuring component and a measuring method thereof, which belong to the field of aeronautical engineering test detection.
开发了基于容积补偿法的局部压迫式指动脉血压连续测量用新型检测装置，对该装置的检测性能和精度进行了试验评价。
A new cuff unit for measuring instantaneous blood pressure at the finger based on the volume-compensation method by local pressurization is developed, and its characteristics are evaluated.
试验和检测表明，该测试仪测量数据准确可靠、重复性好，操作方便，安装调试简单，可以在实际检测中应用和推广。
Test and inspection showed that the tensiometer is accurate, reliable, repeatable, and easy to operate, simple to install and adjust. It can be used and promoted in the actual detection.
设有测量室和试验室各一个，负责各项试验和检具、检规校正管理等，针尖拥有各种先进检测设备对产品进行控制。
We set up a measurement room and a laboratory which in charge of all kinds of testing and management of all the inspection tool and gauge.
从试验和分析结果看，在制定正确的测量策略和进行精确的数据处理的前提下，选用电涡流测距传感器进行辊型在线检测是可行的。
The real tested roll profile is obtained. From the experimental results and the analyzed results, under the preconditions that the proper measuring strategy is planed and the data are accura…
经三种不同的外部条件处理后，使用无损检测设备（FFT）和力学试验机对杉木单板层积材试件静曲强度和弹性模量进行测量。
MOE and MOR of LVL which were made of Douglas-Fir were measured by FFT and loading machine after treated under three different conditions.
系统通过水池调试、水库试验，证实该技术动态范围大、抗干扰能力强、对弱信号具有检测能力强、测量精度高等特点。
The parameters can be recorded by the system. The results from tests at tank and reservoir demonstrated that the technique has characteristics as foll…
系统通过水池调试、水库试验，证实该技术动态范围大、抗干扰能力强、对弱信号具有检测能力强、测量精度高等特点。
The parameters can be recorded by the system. The results from tests at tank and reservoir demonstrated that the technique has characteristics as foll…
应用推荐