对燃气轮机动力涡轮用外力拖动作试验时的有关工作状况作了初步分析。
The working conditions of power turbine of gas turbine during tested with external force driving were presented.
用原子吸收和喷焰光谱法测定燃气涡轮机燃料中痕量金属的试验方法05。
Test Method for Trace Metals in Gas Turbine Fuels by Atomic Absorption and Flame Emission Spectroscopy 05.
概述了某重型燃气轮机双燃料喷嘴组油路的流量及雾化特性试验研究结果。
Experimental investigation results from an injector group of double fuel for a heavy-duty gas turbine were presented.
介绍一种高压燃气发射装置喷管喉衬材料的烧蚀试验方法。
Experimental method for ablation of throat liner material in a high pressure gas launch device is introduced.
通过烧蚀试验研究了烧蚀时间、燃气流量及烧蚀角度等因素对EPDM绝热层烧蚀性能的影响。
The effect of ablation time, gas flow and ablation angle on ablation performances of EPDM insulation were studied by means of ablation experiment.
针对不同的与燃气直接接触的发动机零件，介绍了具体的测点布置方案及测试方法，并对CA6DF 1- 27型柴油机进行了实机试验。
Detailed measuring point layout schemes and test methods for the different parts directly contacting with combustion gas are introduced and tests on diesel engine CA6DF1-27are done.
对某重型燃气轮机燃料喷嘴的工作特性进行了试验研究。
The experimental investigation of the operational characteristics of fuel nozzle for a heavy gas turbine was performed.
从试验结果中看出，文丘利燃烧器具有单独烧油和燃气的功能，节能效果显著，是一种理想的燃烧器。
The test results have shown that the said burner capable of firing oil and gas independently is a ideal one with significant energy saving potentialities.
对选作高速柴油机预燃室喷咀材料的八种耐热钢及高温合金的燃气热疲劳性能进行了试验研究。
The thermal fatigue resistance high temperature combustion gases of eight heat resistant steels and superalloys in fatigue properties were studied on test rigs heated by combustion flue gas.
通过试验验证了所设计的燃气ECU的控制性能。
The control performance of designed gas ECU is verified by tests.
从理论上分析了燃气管网气密性试验的方法、过程和影响因素，提出较为合理的方法。
The paper analyzes theoretically the method, process and influence factors in air pressure test. And some reasonable way are brought up in it.
论述球铁高压燃气闸阀的概况、设计要点、壳体浇铸工艺性的改进和试验方法。
The general description, main points of design, technological improvements in valve body casting and test methods of the said valve are discussed.
文章说明了利用瞬态激振，即锤击法，研究燃气轮机振动特性的试验及分析方法。
This paper deals with a testing and analytical method for studying gas turbine vibration characteristics by use of transient excitations, i. e. hammering method.
在一模拟火花点火发动机燃烧室内进行了试验研究，文中给出了燃气瞬态温度的实测结果，并进行了分析讨论。
Experiments were carried out in a simulator of si engine combustion chamber, and the measured data were shown in this paper with detailed analysis.
开发了一种新型的双色法火焰监测分析系统，并在一台燃气试验炉上对部分预混的甲烷-空气燃烧火焰进行了温度场的空间实时无干扰的测定演示。
A new type of two-color flame monitoring system is developed, and real-time, non-disturbed, spatial tests are performed on a partially premixed methane-air combustor of a gas-fired testing furnace.
为验证原本只为在地面起动发动机而设计的某型燃气涡轮起动机的空中辅助起动性能，在飞行试验台上，对其进行了空中辅助起动试验。
In order to validate auxiliary airstart performance of a gas turbine starter designed only for the ground engine, the test of auxiliary airstart was conducted on the flight test rig.
途述了带外函道的双转子发动机内、外函分流，各自通流阻力可以改变的燃气发生器试验装置和试验结果。
This paper deals with the test plant and test results of a gas generator of a by-pass dual-rotor engine with variable duct flow path resistance.
介绍德国Q系列燃气表的结构及工作原理、技术数据、试验记录、选型与施工要求、实际应用。
The structure and operating principles, technical data , test records, type selection and demands in installation , and actual application of German Q series quantometers are described.
在普通燃气快速式热水器的基础上，研究开发了冷凝式燃气热水器，对其热工性能进行试验研究。
Based on common instantaneous gas water heater, the condensing gas water heater is developed, and the experimental study on its thermodynamic performance is made.
通过两种结构烧嘴的热态燃烧试验对比，研究了烧嘴结构、燃气射流速度、过量空气系数对高温空气燃烧过程氮氧化物排放的影响特性。
The effects of nozzle structure, fuel gas injection velocity and excess air coefficient on NOx emission in high temperature air combustion were investigated.
概述了在研的某重型燃气轮机喷嘴组油路的流量特性试验研究结果。
Briefly described were the results of an experimental study on the nozzle group oil-circuit flow characteristics of a heavy-duty gas turbine (National 863 Program Major and Special Item).
介绍了某型燃气轮机转子模态试验，试验测得转子静态固有频率和模态振型。
This paper takes a type gas turbine rotor as an example to analyze its natural frequency and modal shape.
建立了多孔介质燃气炉试验系统，对燃气炉进行了试验研究。
A testing system of porous media gas-fired boiler was set, and experiments were done.
为改进部件性能和燃气发生器与动力涡轮配套的整机试车提供试验数据。
This provides a technical support for improving performance of the gas generator and the matching of the power turbine with the whole engine.
气体压力试验时，必须用空气或其他无毒、可燃气体介质进行预试验。
Prior to the air pressure test, a trial test shall be carried out using air or other nontoxic and incombustible gas.
本文介绍了R_1燃气发生器的设计、生产和试验整个研制过程。
Application, characteristics and development process of R_1 gas generator are described in this paper.
本文中的超速试验台，是用来考核船舶用燃气轮机轮盘高速旋转性能的。
The over-running test rig is applied to evaluate the high-speed rotating performance of the disk on the gas turbine.
试验结果表明冷凝式燃气快速热水器有很好的实用价值。
It is proved that gas instantaneous water heater with condensation has pretty practical value.
在方太厨具有限公司JSQ32-Q0306型家用燃气快速式热水器的基础上，开发了新型冷凝式燃气热水器，并对其进行了热工性能试验研究。
Based on JSQ32-Q0306 gas instantaneous water heater of Fangtai Kitchenware Co. , Ltd. , A new type of gas heater with condensation has been developed. Its performance test has been made.
试验结果表明冷凝式燃气快速热水器有很好的实用价值。
It is proved that gas instantaneous water heater with condensation has pretty...
应用推荐