与质量部合作进行产品的FMEA，并对样件进行功能性认可试验和检验。
To coordinate with Quality to do FMEA of product and conduct the functional validation testing of prototype.
预报试验和检验表明，动态的二项式曲线预报模型，有较高的拟合能力，在业务应用中有较好的效果。
The results show this forecast model has high fitting ability and performs well in the operational forecast.
供应商应在B 发出的书面要求规定的时间内采取措施，着手纠错， B不承担任何有关纠错的费用，这些费用包括但不限于：调查费、运输费、拆卸费、修理 费、组装费、安装费、试验和检验费等。
The SUPPLIER shall, with the time period stipulated in the written claim made by B, take measures and initiate work to remedy the fault or defect at no cost to B.
这就需要通过加强最终检验和试验来把关。
This need by strengthening the final inspection and testing to ensure.
检查出厂合格证、质量检验报告和现场抽样试验报告。
Check the factory certificate, quality inspection report and on-site sampling test report.
技术工程部对检验、测量和试验设备的适用性负责。
The Engineering Department is responsible for the applicability of the inspection, measuring and test equipment.
仓库管理员负责入库产品的检验和试验状态的标识。
The storekeeper is responsible for identifying the inspection and test status of the products in warehouse.
从事无损检验(nde)、检查和试验工作的人员，应严格遵照适用于相关检验活动的文件化程序要求，开展相关工作。
Personnel involved with NDE, inspection and performance test activities carry out their duties strictly in accordance with documented procedures applicable to the relevant activity.
质量部负责采购产品的检验和试验。
The Quality Department is responsible for the inspection and test of the purchased products.
质量部负责检验、测量和试验设备的校验以及测量系统分析。
The Quality Department is responsible for the calibration of the inspection, measuring and test equipment as well as the analysis of the measurement system.
采购或生产制造开始之前，合同专业检验试验计划(itp)应充分明确检查、无损检验(nde)和性能试验介入点。
Prior to procurement or commencement of manufacture, the inspection, NDE and performance testing intervention points shall be adequately defined in a contract specific inspection and test plan (ITP).
质量部负责制订检验和试验规范，对顾客产品进行检验和验收。
The Quality Department is formulating the inspection and test specifications, and inspecting and accepting the customer products.
卖方所提供的全部设备和材料将由买方负责检验；质量合格证、检验和试验记录应由制造厂出具。
All the equipment and materials supplied the Seller shall be inspected the Buyer and the quality certificates and inspection and test records shall be issued the manufacturer.
本文以桥梁仿真分析技术为主线，以整治效果为目标，以荷载试验和长期观测为检验手段，建立了既有钢桥裂纹安全检测评估系统。
Based upon finite element simulation analysis, load tests and long-term observation, a detection and evaluation system for old steel bridge safety was developed in this thesis.
拥有完善的检验和试验手段，形成了完整高效的产品开发体系。
Perfect inspection and test means, complete and efficient product development system.
制造部负责生产过程半成品或成品检验和试验状态的标识。
The Manufacturing Department is responsible for identifying the inspection and test status of the semi-finished products or the finished products in production process.
建立和维护质量控制、质量标准、检验和试验方法及程序。
Establish and maintain the basis for quality control, quality standards, inspection and test methods and procedures.
经核准的检验试验计划（ITP）由生产工程部（PED）发放至所有部门，以便在生产制作期间，确定内部检验和客户检验要求。
The approved ITP will be issued by PED to all departments so that internal and client inspection requirements are identified during manufacture.
检验、测量和试验设备控制符合与不符合质量体系要求的客观证据。
Inspection, measuring and test equipment control with and not in accordance with the requirements of objective evidence.
利用宏观分析、显微检验、硬度测试和装车试验等手段，对引进奥地利重型汽车内齿圈按照新的气体氮碳共渗工艺处理后的质量进行了研究。
The quality analysis for gas nitrocarburized inner gear ring of heavy truck imported from Austria was taken by means of macro/micro-examination, hardness measuring and running test.
无损检验、检查和试验人员，应接受过相应程度的教育和培训，确保其有能力从事指定的检验工作。
NDE, Inspection and performance test personnel shall have received appropriate indoctrination and training to the extent necessary to assure their competence in performing the assigned tasks.
设备和检验与试验的全部费用，应由卖方负担。
All expenses involved in the inspection and text of the Equipment and Materials shall be for the Seller's account.
本程序确定了检查、无损检验和试验相关的程序控制，并提出了一套体系和指示要求。
The purpose of this procedure is to provide for a system, instructions and to identify the procedural controls associated with inspection, non destructive examination and test activities.
介绍了型式认可试验和工厂例行检验中有关信息技术设备的保护连接导体电阻的测量方法，以及在某些特殊设备上的应用。
The text introduced the test method and application in some special instances about Information technology equipment Protective Bonding Conductor in Type test and Routing test.
试件的焊接和试验应由检验员或检验团体证实。
Welding and testing of the test pieces shall be witnessed by an examiner or an examining body.
国家制定了国标GB18240，规定了税控收款机的通用要求、试验方法和检验规则。
A national standard GB18240 has been made for FCR to define the general specifications, test methods and inspection regulations.
适用于产品生产全过程的检验和试验状态的标识。
This is applicable to the identification of inspection and test status for the whole production process.
适用于产品生产全过程的检验和试验状态的标识。
This is applicable to the identification of inspection and test status for the whole production process.
应用推荐