对煅烧后的试样的氧化百分率、失重、致密层和致密层的显微结构特点作了鉴定。
Evaluation of the fired samples for oxidation percentage, weight loss, dense zone and microstructural characteristics of the zone is carried out.
通过分析EPS水泥的内部结构来研究其微波损耗机理，分析了EPS和炭黑填充率、EPS颗粒直径以及试样厚度对材料吸波性能的影响。
The electromagnetic loss mechanism was analyzed and influences of EPS and CB filling ratios, EPS diameter and sample thickness were also analyzed in the paper.
通过扫描电镜图片对木材试样横纹剖面的多孔结构特征进行了观察，并利用分形理论对其进行了分析。
The porous structure of wood samples on their cross sections was observed using the scanning electron microscope (SEM) images and analyzed via the fractal theory.
用X射线衍射仪（XRD）以及扫描电镜（SEM）等研究了试样在不同预设升温速度下的相结构和显微组织。
The phase structure and microstructure of samples under different heating rates were investigated by X-ray diffraction (XRD) and scanning electron microscope (SEM) etc.
通过分析木材试样的扫描电镜照片，研究了木材横纹剖面的多孔结构特征，采用盒维数法计算了其分形维数。
The porous structure of wood samples on their cross sections was analyzed using scanning electron microscope images, and their box-counting dimensions were calculated.
用差示扫描量热计（DSC）及正电子湮没寿命谱（PALS）方法表征了两种不同物理老化条件试样的凝聚结构以及自由体积的差别。
The free volume and cohensional entanglement structure of samples preapared under two different thermal conditions were measured by positron annihilation life spectroscopy (PALS) and DSC.
讨论了各种试样形态结构的特征。
The characteristics of morphological structure of each specimen have been discussed.
用DTEM观察了全部试样的液相分离结构，系统地测量液相小滴的粒度分布。
For all the specimens, liquid phase separation structures were observed generally by DTEMand a systematic measurement of liquid droplet size distribution was carried out.
用扫描电镜观察了全部试样的液相分离结构并比较了基础釉和变色釉的可见光谱。
For all the specimens, liquid phase separation structures were observed generally by SEM and a comparison between basic glaze and glaze of change color was made by Visible spectra.
模拟结果表明，该模型可以用来研究单轴荷载作用下混凝土结构的破坏机理和多种尺寸试样尺寸效应律。
The result shows that the model can be used to study the mechanism of concrete failure and size effect of concrete structures under uniaxial loads.
前言：对软质聚氯乙烯（ PVC）/ 丙烯腈-丁二烯-苯乙烯共聚物（ABS）合金的力学性能、加工性能进行了测试，并利用差示扫描量热仪和扫描电镜对试样断面结构以及两相的相容性进行了表征。
The mechanical property and processing property of soft PVC/ABS alloy were tested, the fracture surface structure of the sample and compatibility of the two phases were characterized.
通过对某型号发动机试样阶段结构可靠性实例分析，得出了较满意的结果。
And a more satisfied result is obtained by analysing the living example of the structure reliability for some solid rocket motor at the test sample stage.
本文介绍了最近研制成功的试样煮茧机的特点、性能、结构和使用效果。
This article deals with the features, performance, structure and usage benefits of a newly developed cocoon boiling machine.
应用X 射线衍射（XRD）、扫描电子显微镜（SEM）、能谱（EDX）和红外光谱（FTIR）等分析手段对试样的相组成、形貌、成分、价键结构等进行了分析；
XRD, EDX, SEM and FTIR were used to characterize the structure, composition, morphology and chemical bonds of the samples.
用此方法对某型号发动机试样阶段结构可靠性进行了实例分析，得出了较满意的结果。
By using it, structure reliability of the some motor in its preproduction model stage has been analyzed and the more satisfied results obtained.
应用聚乙二醇1540作纸张试样的包埋剂，并用扫描电镜观察纸页的内部结构。
This article explained that the polyethylene glycol 1540 was used first for burying paper sample and the internal structure of paper was observed with SEM.
再采用与实物等厚度、与真实咬边等尺寸的模拟试样，进行与实际结构等应力范围条件下的模拟疲劳试验。
Using the samples with equal thickness to the tank and with the same size as the real undercuts, a simulation fatigue testes are performed under the stress range of an actual structure.
根据计算机拟合结果，对这些试样的组织结构进行了初步分析，并对微量砷的作用进行了讨论。
According to the fitting results by computer, the microstructure of these specimens was investigated and the effect of trace element in the steel was discussed.
将代表结构混凝土的试样储存在尽可能靠近其所代表的结构物中的浇注点，并向试样提供与结构相同的温度保护和湿度环境。
Store specimens representing structure concrete as near the point in the structure they represent as possible, and afford them same temperature protection and moisture environment as the structure.
将其中试样A通过氧化-还原处理，表面具有层状结构，与另一脱碳试样B一起放入改造后的电阻炉内在通氢气的气氛中进行渗碳淬火。
Sample A whose surface has layer structure via oxidize-deoxidize treatment and sample B which is decarbonization are put into resistance furnace for carbonization and quencher under hydrogen.
通过偏光显微镜和反光显微镜观察试样釉层的显微结构，发现虹彩釉在成釉过程中釉层表面析出了针状的黑锰矿晶体。
The microstructure of the sample glaze layer under polarizing microscope and reflecting microscope has showed acicular hausmannite crystals on the glaze layer surface of luster glaze.
用会相显微镜、SEM和TEM观察了真空烧结、低压烧结试样的显微结构。
The microstructure of rods sintered in vacuum and by sinter-HIP was investigated by metallographic microscope, SEM and TEM.
采用X射线衍射和透射电子显微镜研究了试样的显微结构。
The microstructure was investigated by X-ray diffraction and TEM analysis.
采用SEM、XRD、XPS、EIS等分析手段，对试样腐蚀产物膜进行组织结构及电化学交流阻抗分析。
The structure and electrochemical behavior of the corrosion scale were analyzed by SEM, XRD, XPS and EIS.
用XRD、SEM和荧光分光光度计，对试样的晶体结构、表面形貌及发光性能进行表征。
The crystal structure, surface morphology and spectral characteristics of the samples were investigated by X-ray diffraction (XRD), SEM and fluorescence spectrophotometer.
本文通过扫锚电镜观察了人工制备的湿陷性黄土试样在各种广义应力状态下的微结构。
In this paper, scanning electron microscope is used to observe the microstructure of the artificially prepared structured collapsible loess samples under different generalized stress state.
通过X射线衍射和扫描电镜对国内外铬酸镧电热元件的结构特征进行了分析，利用定量金相截线法对试样的晶粒尺寸分布进行了统计。
The structure of internal and Japan ones were studied by X ray and SEM. The grain distribution was statistically measured by quantitative metallography method.
本文介绍了全尺寸管试样测定含裂纹管道结构J_R阻力曲线的测试技术。
The experimental technology for determining JR curves by full-scale pipe specimens was introduced.
本文介绍了全尺寸管试样测定含裂纹管道结构J_R阻力曲线的测试技术。
The experimental technology for determining JR curves by full-scale pipe specimens was introduced.
应用推荐