并实现了这个模块的硬件电路的设计和驱动程序的开发。
And we have designed the driver and the hardware circuit of this modular.
论文对系统硬件性能要求以及软件功能进行了分析。进而，设计了系统的硬件电路和软件功能模块。
In the thesis it analyses the hardware performance requirements and the software functions of the system and designs the hardware circuits and the software function modules after analysis.
系统VCO模块采用微分电路设计技术，可将电源噪音对时钟信号输出抖动的影响降至最低。
The VCO module makes use of differential coefficient circuit design technology to lower the effect of power resource on the clock signal input shake.
设计了一个串口通讯的单片机数据采集模块，文中详细阐述了模块的电路原理和程序设计。
Design a data collection module with serial port based on microcontroller. The thesis explains the circuit principle and program designing in detail.
通过对各个模块设计过程的介绍，阐明了使用HDL语言设计超大规模集成电路的一般特点。
From the introduction of design process of every module circuit, we can see easily some general feature of VLSI design with HDL.
六大教学模块包括元器件认识、工具仪表使用、电路原理和电路设计、线路板制作、组装和配线、调试和检修。
Teaching module includes six components knowledge, tools, instruments used, circuit principle and circuit design, circuit board production, assembly and wiring, debugging and maintenance.
设计中将上述功能电路制成模块电路板，同时增加一应急电源和应急气道，大大提高车门的安全性与应急性。
In the design, the functional circuits are made into module circuit, and the emergency power and airway can also be increased to improve the safety and emergency of car greatly.
根据模块化解决方案和所使用电路类型来制定设计概念。
Making design concept and decide on the type of modular solution and circuit to be used.
详细阐述了系统的总体设计方案，给出了界面模块与89c51接口电路，最后介绍了软件设计方法及程序流程图。
This paper detailedly introduces the whole design scheme of the system, the circuit on interface module and 89c51, the method of the software design and program flow chart.
分析了功能模块的硬件结构并设计相应的硬件电路。
Analyze the hardware structure of functional modules and then design the relative hardware circuit.
介绍了便携式脉冲输出模块测试仪的原理和主要电路设计思想。
The principle and main circuit design ideas are given for the mobile pulse output module tester.
对系统总体设计方案进行了研究分析，硬件设计中详细介绍了控制回路的电流检测模块、电机转速和位置检测模块、PWM输出和故障输入电路。
The overall design scheme is researched. The hardware of current detection module, motor speed and location detection module and PWM output and fault input module is introduced in detail.
用相关的电路模块设计了符合要求的金属表面裂纹深度定量标定系统。
The correlative circuit modules are used to design the quantitative indication system for crack depth on the surface of steel material.
分析了对PIN开关实现开关控制、RFSTC控制、STC校正控制的原理和设计方法，并给出了电路模块的实施框图。
In this article, we introduce and analyse the principles and design methods of PIN switch, RFSTC and STC adjusting, and give block diagram of the controlling circuit module.
利用CAD图纸分块和分层的特点，对标准电路模块进行参数化设计。
Make use of the character that CAD drawings are separated into blocks and layers to design the standard circuit module using parameters.
利用上述方法实现的一些CMOS单元电路的自动综合模块已经集成到FDAADS——“复旦模拟电路自动化设计系统”中。
Synthesis tools for several cell level CMOS analog circuits implemented with the above approach have been integrated in FDAADS—FuDan Analog Circuit Automated Design System.
红外遥控模块通过设计红外发送和接收电路，实现系统软件参数的设置功能；
Infrared remote control device actualizes the system software parameters setting through the design of infrared sending and receiving circuit.
在此基础上对各模块电路进行了详细的理论分析与具体电路设计实现。
On this basis, it describes the circuit of the detailed theoretical analysis and the design of the modules.
基于研究高压脉冲串联各个模块的同步性问题，设计了一种适用于串联模块开关管的同步驱动电路。
Based on the research of synchronization problems of high-voltage pulse in series, a synchronous drive circuit for modules in series is designed.
本课题是对无工频变压器开关电源控制器芯片模块电路的设计与研究。
My project is focused on the design and research of PWM switching power supply control circuitry that requires high efficiency and reliability.
对各模块的硬件设计，先简单介绍所选芯片的特点及使用方法，再给出该模块的电路连接图，最后介绍了电路的工作原理。
For the hardware design of every function module, the paper introduces the chip's features and usage manual, shows the circuit diagram, and introduces the work principle in the end.
其次依照方案中组成单元的划分，详细论述了母板，功能选择与控制电路，模块电路的开发及设计。
Secondly, in accordance with the scheme, the thesis discusses the development and design of the motherboard, function choice and control circuits and module circuits.
并为各模块电路设计了稳定的供电电源。
At last, stable power supply is designed for each module circuit.
通过软件设计和硬件电路的结合，实现了数据采集电路的模块化设计，提高了系统的精度和可靠性。
By combining software design and hardware circuit, the modularization of designing data acquisition circuits is fulfilled, and the accuracy and reliability of the system are enhanced.
专利模块电路设计，智能故障自动检测，应急转换时间快。
Patent circuit design with Intelligent automatic breakdown detection and quick emergency switch times.
硬件设计包括脉冲采集模块、深度模块、遥测接口模块、USB接口模块的电路设计。
The hardware design is composed of circuit designs of pulse signal acquisition module, depth module, telemetry module and USB interface module.
重点阐述了调光控制系统总设计框架、各个硬件模块电路和相应的软件流程。
The framework of whole dimmer control system, the realization of hardware circuit and software flow were expounded emphatically.
并且详细介绍了测试系统中需要自行研发的RS- 422串行通信模块设计，包括串行通信模块总体框图和功能电路设计方案。
Then the design of the RS-422 serial communication module is introduced in detail, including the whole scheme of serial communication module and the design of functional circuit.
并且详细介绍了测试系统中需要自行研发的RS- 422串行通信模块设计，包括串行通信模块总体框图和功能电路设计方案。
Then the design of the RS-422 serial communication module is introduced in detail, including the whole scheme of serial communication module and the design of functional circuit.
应用推荐