叙述了软、硬件的组成和结构，并给出了设计框图。
Describes software and hardware composition and structure, and gives a design diagram.
给出了系统框图、部分硬件电路图和程序设计框图。
Some important architecture of the hardware circuit diagrams and program design diagrams are also provided.
提出了该逆变器的通用计算机辅助分析与设计框图和源程序。
Computer aided analysis and design flow chart and program for current source inverter circuit are presented.
给出了智能变送器的各部分电路硬件设计框图和软件流程图。
The hardware design block diagram and software flowchart of every part of the intelligentized transmitter are supplied.
设计了数控系统的硬件和软件，给出了系统的硬件及软件设计框图。
The hardware and software of this system have been designed as well.
研讨光纤地震仪的优越性和实现的可能性，并提供一个初步设计框图。
The advantages of the optical fibre seismograph and it's feasibility are discussed, and a designing block diagram of the seismograph is given in this paper.
本文描述了芯片组所支持的主要功能、硬件关键接口和硬件设计框图。
This paper describes the main features of the chipsets supported, important hardware interfaces and hardware design architecture.
对该模型的假设条件和推算方法等方面进行改进，给出了新模型设计框图。
Improvement on hypothesis and arithmetic of the model was advanced and the chart of new model design was proposed.
全文介绍了这种控制系统的硬件结构和软件设计框图、主要抗干扰措施。
The principle of microcomputer control on TIG welding, the hardware structure and software block diagram of …
全文介绍了这种控制系统的硬件结构和软件设计框图、主要抗干扰措施。
The principle of microcomputer control on TIG welding, the hardware structure and software block diagram of control system, and main...
本文首先说明了TA系统的硬件设计，给出了系统的硬件的总体设计框图。
Firstly, this paper describes the hardware design of TA system and gives its global design module diagram.
在此基础上分析了编码和译码程序的设计，并给出了系统的程序设计框图。
On the basis of these, analysed the coding and decoding programming, as well as giving the system design diagram.
给出了系统的设计框图，在此基础上对系统硬件设计和软件设计进行了阐述。
It produced the block diagram and carried on the elaboration in this foundation to the system hardware design and the software design.
本文以地域通信网为背景，建立了通信模型，给出了系统的设计框图以及主流程图。
The paper takes the local communications network as a technical background to establish an evaluating model, and presents the model's design diagram and main flowchart.
根据发动机爆震原理，介绍了一种发动机爆震检测的方法，并给出了硬件设计框图。
With a view to the theory of engine knock, this paper introduces a method of knock detection in detain.
从硬件电路设计和软件程序流程，介绍仪器的设计组成，给出设计框图和器件的选型。
The hardware and software architecture are described. The block diagrams of system and the selection of devices are given.
文中详细论述了液位信息检测、电路处理的原理，给出了整体电路设计框图和软件流程。
It detailedly describes the principle of the liquid level test and circuit processing, a frame drawing of the overall circuit design and software flow.
首先对综合方真系统的功能和组成作了简要介绍；然后给出了OF P软件的设计框图。
First the function and composition of inter-gral simulation system are simply described, then the flow diagram of OFP is given.
本文介绍如何利用单片机设计碱性电池的充电器，给出了硬件设计原理图和软件设计框图。
This paper introduces the design and accomplishment of the Charger for Alkalescence Battery. and gives the schematic diagram of the hardware and the block diagram of the software.
并分别对硬件和软件系统进行了详细的分析和设计，给出了具体的硬件设计框图和软件流程图。
And specific design diagram and software flow chart can be drawn out by analyzing and designing hardware and software systems in details.
给出了利用89c51系列单片机和AD 9858组成的双通道直接频率合成器的设计框图。
And the hardware functional block diagram of the double channels DDS source by using AD9858 and chip monolithic computer 89c51is provided.
针对直接序列扩频信号，介绍了其发射和接收部分基本组成，给出了系统接收部分的具体设计框图。
The paper introduces the basic composition of transmitter and receiver in direct-sequence spread spectrum system and gives the detailed design block diagram of the receiver.
介绍了数字参考咨询和数据挖掘，论述了基于挖掘技术的数字参考咨询系统设计框图及数据库结构设计。
This paper introduces digital reference service and data mining, and expounds the design flowchart of digital reference service system based on data mining and the design of database structure.
详细分析了基于不同层次的故障采集、故障定位、故障隔离、非故障区域恢复的实现方法，并给出了软件设计框图。
For different layers the realization methods of fault acquisition, fault separation, re-energizing of non-fault area are analyzed in detail, and some diagrams of software design are also given.
本文介绍了STD总线在红外轴温检测系统中的应用情况，给出了红外轴温检测系统的硬件组成和软件的设计框图。
The paper introduces application of STD Bus microcomputer in detection system for temperature of axle by using infrared sensor, and gives the system block diagram of hardware and software.
主要介绍了SDRAM的工作原理、FPGA芯片选型、总体设计框图、FPGA的内部设计模块以及性能参数等。
In this part, the paper mainly discusses the operation principle of SDRAM, chip selection, the diagram of design, the internal module designs in FPGA and the parameter of the board.
文中给出了系统总体设计框图并详细介绍了系统主要功能及工作过程，最后针对设计中用到的关键技术进行了总结。
The whole block diagram of the system is given, and the main functions and working process of the system are presented in detail. Finally some key technologies used in design are summed up.
针对采用PSD研制的激光测距传感器在检测及控制电路的设计中所存在的关键问题进行了分析，并给出了电路的设计框图。
This paper analyzes the key problems in designing signal measuring and control circuit of laser range sensor using PSD, and gives out the circuits' diagrams.
针对采用PSD研制的激光测距传感器在检测及控制电路的设计中所存在的关键问题进行了分析，并给出了电路的设计框图。
This paper analyzes the key problems in designing signal measuring and control circuit of laser range sensor using PSD, and gives out the circuits' diagrams.
应用推荐