球杆系统这样一个非线性不稳定系统是为自动控制原理等基础控制课程教学实验设计的实验设备。
Ball and beam system is a nonlinear and unstable system, which is designed for experiments of basic control curriculum such as feedback control.
本文的第一部分从理论上建立了三个动力机构的非线性数学模型，为进行实际设计奠定了理论基础。
Textual the first part built up three motive organizations from the theories not the line mathematics model, for carried on the actual design to lay the theories foundation.
该程序为线性系统分析设计提供了一种快速准确的新工具。
The program offers a new tool for analysis and design of linear system.
该文以同步旋转坐标系模型为基础，设计了三相电压型PWM整流器的级联式非线性PI控制器。
This paper proposes a cascaded nonlinear PI controller for three-phase voltage source PWM rectifier, which is based on its model in synchronous reference frame.
为实现电子束曝光机扫描场的线性畸变校正，设计了图形发生器的成像系统，该系统包括硬件和软件两部分。
An imaging system of pattern generator was designed to correct linear distortion of scanning field of ane-beam lithography system, which was composed of both hardware and software.
为提高动态系统的性能，提出了一种基于线性矩阵不等式技术的鲁棒输出反馈控制器设计方法。
To enhance the performance of dynamic systems, a design method of robust output-feedback controller based on the linear matrix inequality technique was proposed.
为检测仪的线性设计与调整提供可遵循的规律。
Regular pattern is offered and used to design and adjust the linearity of detecting apparatus.
通过算例分析得到一些不同于线性结构的结论，为建筑结构动力设计与分析提供了理论基础。
Some conclusions different from linear structures have been drawn through the analyses of numerical example. Theoretical basis is provided for the structural dynamic design and analysis.
首先，假设系统不存在输入约束，根据性能指标的要求，为线性系统设计了动态控制器。
Firstly, dynamic controller is designed according to the performance requirements for the linear systems assuming the absence of the input saturation.
为旋转机械转子-圆柱轴承系统的非线性动力学分析和设计提供了必要的理论基础。
This supply the helpful theoretical tools for nonlinear dynamic analysis and design of rotor-elliptic bearing systems in rotating machines.
采用逆最优控制方法为一种四维混沌系统设计了一个线性状态反馈控制器。
A linear state feedback controller is designed for controlling a four-dimensional chaotic system by the inverse optimal controlling approach.
本文研究了一类非线性分布参数系统的模型辨识及其状态观测器的设计方法，为这类系统的研究提供了新的途径。
A method of identification and state observer design of a nonlinear distributed parameter system is studied in this paper. A new approach for this kind of systems is proposed.
通过解耦，三轴转台系统成为三个单输入，单输出线性系统，为理论分析设计控制系统提供了转台模型。
The model is transformed into three single input and single output linear systems, and then it can be analyzed and designed by the linear system theory.
研究结果为在实际旋转机械转子-椭圆轴承系统进行非线性动力学分析和设计时，选择油膜力模型提供了依据。
The foregoing provides a basis for the selection of oil-film force model during the nonlinear dynamic analysis and design of an actual rotating mechanical rotor-elliptic bearing system.
该跨层设计将问题的求解建模为马尔科夫决策过程，利用线性规划推导出最优的自适应传输策略。
The solution to the cross-layer design is modeled as a Markov decision process and utilizes the linear programming method to obtain the optimal adaptive transmission policy.
通过设计一个平方和函数，使蜡沉积速率的计算值与实测值的残差平方和为最小的优化数学模型成为一个无约束的非线性规划问题。
The paper designs a sum of square function, which is an optimization mathematical model that makes the residual sum of squares of wax deposition rate between the calculated and the measured minimum.
并以法向过载控制模态为例，将线性二次型运用到飞行控制系统的控制律设计中。
The LQ is adapted to the flight control law design such as the Normal Acceleration control system.
为合理设计大型水轮发电机端部结构，考虑到叠层结构定子铁芯的各向异性及非线性，建立了包括定子铁芯边段在内的水轮发电机端部涡流场分析的数学模型。
The mathematical model to analyze the hydraulic generator's end region field is proposed. The stator's end packets are included, the anisotropic and nonlinear stator iron core is considered.
为提高锅炉-汽轮机系统的信号跟踪和抗干扰能力，利用输入-状态反馈线性化和输入-输出反馈线性化方法分别设计了锅炉-汽轮机系统的控制律。
To improve tracking and disturbance rejection properties, the input state and input output feedback linearization methods are used to design the control laws of a boiler turbine system.
此设计提出了一种新的处理图形的方法，为非线性座椅架的推广起到一定的促进作用。
This design offers a new method for processing graph, and it takes effect to a certain extent for popularization of the nonlinear suspension of chairs.
本文讨论为连续线性时不变多输入多输出系统设计多线性函数观测器的时域方法。
This paper discusses time-domain method of designing observers for linear functions of the state vector of the continuous, linear, time-invariant, MIMO systems.
振动系统动力学设计被抽象为高维广义非线性特征值反问题。
The dynamic design of vibration system is considered as an inverse problem for nonlinear generalized eigenvalue in this paper.
将多级燃气涡轮的设计问题表述为其空气动力学损失和质量为极小化目标的多目标非线性数学规划问题。
The problem of multistage design of gas turbines is formulated as a multiobjective nonlinear programming problem with the objective functions of minimum aerodynamic loss and total mass of the turbine.
该模型以极限状态设计方法为基础，采用机遇约束规划方法变换为一个等价确定性非线性规划问题。
This model is based on the limit state design philosophy. This paper adopts the chance constraint programming method and changes the model into an equal deterministic nonlinear design problem.
以多回路高阶非线性控制系统为例，介绍MATLAB环境下控制系统优化设计的方法。
The method of optimal design for the control system with MATLAB is introduced, by taking a multi high order nonlinear system for example.
本文证明了为任意模板集设计存储访问无冲突非线性存储方案的问题是一个NP完全问题。
In this paper, the problem to design a conflict free access storage scheme for arbitrary templates set is proved to be a NP Complete problem.
为克服分散鲁棒控制器设计中输出量各阶导数可测要求的限制，设计了带有高增益观测器的非线性鲁棒控制器。
A nonlinear robust controller with a high gain observer (ONRC) was developed for a decentralized robust controller for use when not every derivative of the output is measurable.
论文建构性地提出非线性科学思维建筑设计目标和原则，为建筑设计引入一种积极的理性观念。
The thesis puts forward the aim and principle of nonlinear-science in architecture design, in order to bring an active and rational notion in architectural design.
为提高预测精度，解决非线性组合预测中的困难，利用改进BP神经网络对非线性组合预测模型进行了设计。
To improve accuracy of forecast, the paper utilize advanced BP neural network to design for nonlinear combining forecasting model.
该软件是从自动控制原理教学实际出发，以MATLAB为平台，实现了线性系统分析、线性系统串联校正补偿器设计和PID参数整定。
Using MATLAB as a flat roof, this software implements linear-system analyses, linear-system corrector in series design and PID tuning.
应用推荐