在此基础上，采用基于NTP技术的同步方案实现系统中各设备时钟的同步。
And also the synchronization scheme based on NTP technology is used to fulfill the clock synchronization for all equipments in the system.
外部设备——例如，通用串行总线(usb)端口或系统时钟。
External devices — For instance, Universal Serial Bus (USB) ports or the system clock.
第一批完全由环境能量供电的设备很可能是传感器、计算器和时钟。
The first devices to be powered entirely by ambient energy are likely to be sensors, calculators and clocks.
一些设备有两个时钟，一个用于“捕获”或者“显示”数据，另一个则用于提供将数据输入器件的时序。
Some devices have two clocks, one to "capture" or "display" data, and another to clock it into the device.
网同步技术是数字通信系统的关键技术之一，网同步时钟是网同步技术的关键设备。
The network synchronization is one of the key technologies for digital communication and the clock is the most important equipment in the network synchronization.
在收到停止位之后，设备将通过拉低数据线，生成最后一个时钟脉冲来应答收到的字节。
After the stop bit is received, the device will acknowledge the received byte by bringing the Data line low and generating one last clock pulse.
设备通常在第一个时钟之前和最后一个时钟之后需要额外的空闲时钟时间，或者在一个命令和它的响应之间也需要。
Devices often require extra clock idle time before the first clock or after the last one, or between a command and its response.
辅助设备(指键盘)检查时钟线，如果时低电平，禁止发送数据。
The auxiliary device checks the 'clock' line. If the line is inactive, output from the device is not allowed.
无线电广播接收设备，不论是否与声音的录制、重放装置或时钟组合在同一机壳内。
Reception apparatus for radio-broadcasting, whether or not combined, in the same housing, with sound recording or reproducing apparatus or a clock.
只有当时钟线为低的时候，主机才可以改变数据线(也就是将数据写入到数据线)。数据将在时钟为高电平的时候被设备读龋。
The host changes the data line only when the Clock line is low, and data is read by the device when Clock is high.
异步中断是由其他硬件设备产生的，可以在CPU时钟信号的任意时刻到来。
Asynchronous interrupts are generated by other hardware devices at arbitrary times with respect to the CPU clock signals.
时钟信号总是由设备端生成的。
论文着重介绍了主时钟以及相关同步设备精度的主要测试方法。
This article lays its stress on the main testing methods of the precision of master clock and the relevant synchronous equipment.
因此，如果来自自主扫描的一个或多个结果超过阈值，则传感器面板设备再次启用处理器和一个或多个时钟来主动地扫描传感器面板。
Accordingly, if one or more results from the autonomous scans exceed a threshold, the sensor panel device re-enables the processor and one or more clocks to actively scan the sensor panel.
当处理器和一个或多个系统时钟被停用时，传感器面板设备可以针对触摸活动周期性自主地扫描传感器面板。
While the processor and one or more system clocks are disabled, the sensor panel device can periodically autonomously scan the sensor panel for touch activity.
研究者们说这种电子设备除了时钟、内部存储器在维持工作，以及需要显示设置的时候，别的都处于休眠状态。
The researchers say that electronic devices are lying dormant, running their clocks, maintaining internal memories or displaying their Settings.
佩带者在其手腕划一个圈，该设备便会映射出一个数字时钟盘面。
The wearer can draw a circle on his or her wrist and the device will project a digital clock face.
实时时钟模块是典型的字符设备也是工业控制系统中的重要组成部分。
The RTC module is a typical char device as well as an important part of Industrial Control System.
时钟同步是数字设备协调无误运行的前提条件。
Clock synchronization is the precondition for digital equipment to work in harmoniously.
但是也有可能是任务时钟或通讯设备退化，这意味着它试图按错误的频率通信。
But it's also possible that the mission clock or communications equipment may have degraded, meaning that it's trying to communicate on the wrong frequencies.
时钟频率为1兆赫。在写操作的过程中，设备从传感器独处的数据总取样。
The clock frequency is 1 MHz. The device samples sensor-read data during the write operation.
如果不是，主机禁止通信，设备必须缓冲任何要发送的数据，直到主机释放时钟。
If it's not, the host is inhibiting communication and the device must buffer any to-be-sent data until the host releases Clock.
设备在传输过程中检查时钟线间隔不超过100us。
The auxiliary device checks the 'clock' line during the transmission at intervals not exceeding 100 microseconds.
电信网管中的时钟服务对时钟的精度要求不是很高，但是要考虑既要和本地的操作系统时间无关，又要考虑同步时钟服务器和同步不同类型的设备二种情况。
It is unstrict with precise in LAN for TMN, but it should have no connection with local OS time, and can synchronize to time server and different devices.
从设备发送给主机的数据时在时钟信号的下降沿读取的；
Data sent from the device to the host is read on the falling edge of the clock signal;
随着时钟的发达，许多不同的机械设备正在探索其准确性和长寿。
As the clock is developed, many different mechanical devices are being explored for their accuracy and longevity.
本发明实施例公开了在GPS接收机卡槽上实现实时时钟rtc扣板功能的方法、设备。
The invention embodiment discloses a method and a device for realizing real-time clock RTC buckle function on a GPS receiver card slot.
本发明实施例公开了在GPS接收机卡槽上实现实时时钟rtc扣板功能的方法、设备。
The invention embodiment discloses a method and a device for realizing real-time clock RTC buckle function on a GPS receiver card slot.
应用推荐