论述了将计算机仿真技术应用于翻车机控制系统开发的可行性，并给出具体仿真方案及编程框图。
The feasibility of applying this technique in the development of the control system of tippers is demonstrated with the concrete emulation scheme and a programming flowchart.
文章主要论述了驾驶舱模块系统构成、模块可行性、固定方式及定位策略等内容，从而提出驾驶舱模块方案优化的总体思路。
This article expounds the composition of cockpit module system, module feasibility, fixed form and position strategy and puts out the general thought of cockpit module scheme.
针对主矿采场正值剥离洪峰期剥采比较高的问题，对主矿采场实施陡帮开采的可行性进行论述，并且对陡帮开采方案提出初步设想。
The feasibility of adopting steep slope mining at main quarry is discussed against stripping ratio is high in flood peak period, and the preliminary scheme is put forward.
并从技术经济角度论述了该方案的必要性和可行性。
Feasibility and necessity of the scheme are discussed from technique and economy.
介绍了利用导热油技术加热熬化沥青的设计方案，论述了工艺流程及其实施的可行性。
In this article the author recommends the design scheme to heat and boil bitumen using heat conductive oil and expoundsthe feasibility of the technological process.
首先，本文从技术和经济两方面论述了调车作业监测系统采用DGPS技术方案的可行性。
First, it discusses the technical and economic feasibility for the shunting monitoring system to use DGPS technology.
综合论述了河流涌潮区段粉砂地基抛石护底防冲保护方案的可行性、经济性和适用性。
It fully discusses the feasibility, economical efficiency and applicability of the scour protection scheme of silt foundation in tidal area.
提出了活塞式灌浆泵存在的问题，论述了活塞式灌浆泵技术改造方案的可行性。
Problems of raise the piston grouting pump, feasible of discusses the piston grouting pump technology transformation scheme.
并以大柳塔矿1203和20601两个工作面为例，论述了该方法的可行性及不同防治方案的比较。
It also took Da Liuta mine 1203 and 20601 two face for examples, discussed feasibility of the method and contrast of different controlling schemes.
本文论述了锡黄铜焊丝连续挤压工艺的可行性、成本和理论基础，介绍了连续挤压工艺的方案以及挤压模具系统的设计。
The feasibility, cost and theoretic basis of the continuous extrusion process for producing tin brass weld wire are studied with its technological process and the design of extrusion dies introduced.
论述了小型农用烘干机的设计方案，并通过湿热平衡计算论证了该方案的可行性。
The design plan of a small farm drier is presented, and its feasibility is proved by means of calculating the equalization of moist and heat.
提出了利用PVDF压电薄膜测量火炮发射过程中火药颗粒对弹底撞击应力方案，论述了该方案的可行性。
Solution was proposed in which PVDF piezoelectric film was used to detect the percussion force of powder grains to projectile base in launching environment, and the feasibility was discussed.
通过对该项目工程设计方案及工艺流程和节能、环保方案的论述，证明了该项目在技术上的可行性。
Proved the project technical feasibility through analyzing the project engineering architecture proposal, process set up, possibility of energy-saving and the environmental protection.
考虑到装配、制件表面质量、加工成本等因素，重点论述了如何借助CAE平台实现对冲压工艺方案的可行性评估，从而在多个成形工艺方案中选择一条优化的工艺路线。
AS the first stamping process(drawing) reflects the idea of a whole procedure, a proper route aided by CAE evaluation of a drawing die has been discussed in detail in this paper too.
在可行性研究和需求分析的基础上，对系统的设计方案、功能模块、接口设计、数据库系统设计和安全设计等进行了较详细的论述。
Based on feasibility analyzing and system demand analyzing, emphatically expounds design-project, functional model, interface designing database system designing, security design in this paper.
首先论述了激光引信的组成，然后阐述该方案(性能指标、关键技术等)，最后详细地讨论了其可行性。
First composing of the laser fuze is discussed. Then the schemes (performance index, key technique and solution) is expatiated on. At last feasibility is analyzed in detail.
在可行性分析和需求分析的基础上，对系统的设计方案、各子系统和功能模块等进行了较详细的论述。
Based on feasibility analyzing and system demand analyzing, emphatically expounds design-project subsystem designing functional model and so on in this paper.
笔者论述了现代信息融合技术应用于中医舌象分析的可行性，同时给出特征层与决策层融合应用的初步方案和部分实验结果。
Several different fusion means of tongue images in the decision layer and the feature layer are described. Meantime, a part of the results is also given.
论述了铀屑可控氧化的概念、方案及安全措施，进行了工艺上的可行性研究，提出了可控氧化法处理铀屑的工艺方法。
The concept, procedure and safety measures of controllable oxidizing for uranium turning are described. The feasibility study has been done on technological process.
本文介绍十五期间福建省将要实施建设的数字强震观测台网，着重从项目的必要性和方案的可行性方面进行论述，同时结合福建省的地震监测台网现状进行系统的设计。
The paper introduced The construction of strong earthquake observation system during the Tenth Five Years Plan in Fujian region and emphasized that the necessity of the project and the feasibility.
本文介绍十五期间福建省将要实施建设的数字强震观测台网，着重从项目的必要性和方案的可行性方面进行论述，同时结合福建省的地震监测台网现状进行系统的设计。
The paper introduced The construction of strong earthquake observation system during the Tenth Five Years Plan in Fujian region and emphasized that the necessity of the project and the feasibility.
应用推荐