藏伯格称,常规地震仪采用电路板记录重物受地震波影响的振动情况。
Zumberge said a conventional seismometer records how its mass is displaced by these waves of seismic energy with electric circuit boards.
该仪器将信号生成、信号记录功能集成在一块DAQ卡上,尤其特别的是用传递函数仿真器取代了电路系统。
This instrument integrates signal generation function and signal recording function on a DAQ card, in particular replaces the circuit system with a transfer function emulator.
信号记录方法,相位差检测电路,及信息装置。
Signal recording method, phase difference detecting circuit, and information apparatus.
最后还介绍了一种EPROM写入电路及一种全软件式盒式磁带记录方案。
A circuit for writing EPROM and an all software cassette tape recording scheme are also introduced.
记录介质,播放装置,程序,播放方法,系统集成电路。
Recording medium, reproduction device, program, reproduction method, and system integrated circuit.
在硬件架构搭建完成后,开发出相配套的电路驱动软件,实现对海底环境参数的实时记录与存储。
After completing the whole hardware architecture, the circuit driver is developed to record and save seafloor environmental parameters in real-time mode.
用读数保持电路记录压力变化,较直接读取刻度值更加准确,可靠。
More precise and reliable recording is achieved by reading-keeping circuit compared with the original gauge-reading.
记录介质,播放装置,程序,播放方法,系统集成电路。
Recording medium, playback apparatus, program, playback method, system integrated circuit.
本文给出了一个滤波整形电路,以便从干扰记录中,尽可能干净地提取出中央台授时信号。
In this paper a circuit of filter and shaping is provided for obtaining a better time service signal of the China Central Radio Station from a noised record.
该系统由传感器、信号处理电路、微型计算机及记录装置组成。
This system is composed of sensors, the signal processing circuit, micro-processor and recording device.
本文介绍的是一种用数字集成电路完成的、并用电视屏幕作终端显示记录的新型记录器。
A new recorder with digital circuits and a displaying screen is described in the paper.
用于搜索可写区的设备和方法,用于更新记录管理信息的设备和方法,集成电路,以及一次写入信息记录介质。
Apparatus and method for searching for writable area, apparatus and method for updating recording management information, integrated circuit, and write-once information recording medium.
针对电路板件故障数据记录的实际,运用可靠性理论,提出了没有故障数据板件的备件数量计算方法;
Based on the failure data of circuit board, is a method of calculating spares amount with reliability theory put forward.
在每次测试第一次通电过程中,控制动作时间比较电路启动,同时数字信号处理芯片自动记录每一路的热敏电阻的动作时间数据,并进行处理。
In the first course of testing, the operating time of compare circuit is brought into play, synchronously, digital signal processor clock all the testing circuits operating time and keep these .
对在记录数据时处于脉冲发光状态的激光,不用试验发光或高速抽样保持电路,就能经常连续地控制其强度。
The intensity of a pulse emitting laser can be controlled constantly and continuously while recording data without using test emissions or a high speed sample hold circuit.
在长期的观测过程中,仪器机械部分和电路部分均会产生漂移,因此,仪器记录曲线的格值必须定期进行标定。
As a consequence of the drift of inclinometer's mechanicalness and electrical circuit during the long-dated observation, the lattice value of the inclinometer's record trunk must be calibrated termly.
经编码的数据串经过EFM电路处理以备在CD上进行记录。
The encoded data string now passes through the EFM circuits to prepare it for storage on the CD.
本文介绍了采用快闪随机存储器的高精度、容量生理信号记录仪的设计方法与电路结构。
It is an introduction to the design method and the circuit structure of a high precision and large volume physiological signal recorder with super flash RAM.
二是心率处理电路:选用电压比较器提取一个心电周期中的R波,检测上升沿个数以记录心率。
The second one is the circuit which deals with the heart rate, it selects th voltage comparator to collect the QRS wave in one cycle, and detect the rising edge to record the heart rate.
该系统主要由电路单元、气路控制单元、色谱分离单元、鉴定器和记录仪等组成。
The system mainly consists of parts of gas line, electronic controller, parts of gas chromatography, detector and recorder.
本文介绍了ZR—2型综合遥测日射记录仪的用途、性能、设计原则、误差分析及电路特点。
This paper presents the applications of Model ZR-2 comprehensive telemetering recorder for solar radiation and its properties, design principles, error analysis and features of the circuits.
给出了汽车行驶记录仪CAN总线接口电路硬件设计原理和软件设计流程。
The hardware design principle and software flow chart of the CAN interface circuits were introduced.
写入禁止电路,使用了该电路的半导体集成电路,具有该半导体集成电路的墨水匣以及喷墨记录装置。
Write prohibition circuit, semiconductor integrated circuit containing the same, ink cartridge having this semiconductor integrated circuit, and ink jet recorder.
其次,论文分析研究了车载语音记录装置硬件电路的设计和实现。
Secondly this paper detailed discussed the hardware circuit design and implementation of locomotive voice recorder.
FPGA设计可以自由地加以改变、重新编译和重新加载到电路板上,由此而来的责任是记录变更和保持FPGA设计的版本在配置控制之下。
With the freedom to change, recompile and reload the FPGA design to a board comes the responsibility to keep track of changes and keep FPGA design versions under configuration control.
对记录器抗高过载能力进行理论分析和试验证明,从电路和结构设计方面考虑提高抗高过载能力。
Theoretic analysis and experiment prove to the anti-high over-loaded capacity of recorder, the anti-high over-loaded capacity in circuit and structure design is improved.
介绍垂直摆倾斜仪自动调零的电路、原理和软件。当摆偏离零位越出记录范围时,仪器将不能正常进行记录。
The principle and software of the auto zero point adjustment circuit in VS tiltmeter are described.
针对每一个原形电路板都要维护一个日志记录,这些日志要保持更新。
Logbooks should be maintained with each prototype board and these logs should be kept up-to-date.
控制器的结构包括电源电路、控制电路、互锁电路、延迟复位电路、启动记录仪和声音指示电路、互锁电路。
The controller comprises a power circuit, a control circuit, an interlock circuit, a delaying reset circuit, a startup recording meter, a sound indication circuit and an interlock circuit.
控制器的结构包括电源电路、控制电路、互锁电路、延迟复位电路、启动记录仪和声音指示电路、互锁电路。
The controller comprises a power circuit, a control circuit, an interlock circuit, a delaying reset circuit, a startup recording meter, a sound indication circuit and an interlock circuit.
应用推荐