本文介绍了我国首台高速动力车基础制动装置的设计及制动距离的理论计算。
This article has presented brake rigging device's design and theory calculation of brake distance of the first high speed power car in our country.
为孟加拉国制造的BR集装箱平车采用的是真空制动装置。本文从结构形式、理论计算、试验使用等几个方面作了介绍和分析。
The vacuum braking equipment is applied on the br Bangladesh Railway container flat car. Such aspects as structural form, theoretical calculation, test and application are introduced and analyzed.
通过理论计算并结合现场实际设计出了合理、可行的加热装置。
A reasonable and reliable heating device was designed by means of the theoretical Calculation and the analysis of the actual situation.
本文对振动式自动上料装置的振动系统结构设计方法，参数合理选择，生产率的计算方法进行了初步理论与实验研究。
The paper gives a prelimary study on a few types of automatic vibrating loading devices about its vibrating system design, selection of parameters, and calculation of productivity.
残压计算为自动二次重合闸装置的设计人员提供了理论依据，也是分析异步电动机电容制动过程的基础。
The computation of residual voltage offers the theoretical foundation to the design of automatic secondary reclose, and it is also the analysis basis for capacity braking.
通过理论分析、计算机仿真和试验研究分析了影响气吸滚筒式水稻精量播种装置播种性能的参数。
Through theoretical analysis and computer simulation and experimental study, analyzed effective parameters of the functions of suction drum-type rice precision seeder.
自动机理论是作为离散自动装置和计算机理论模型建立的。
The automaton theory is established as theoretical model of discrete automatic device and computer.
介绍了具有再循环系统的超音速汽液两相流升压装置，并对该装置的各种性能进行了理论计算及实验研究。
A theoretical calculation and experimental study is conducted of a supersonic steam liquid two phase flow pressure boosting unit, which incorporates a hot water recirculation system.
本文介绍了我国首台高速动力车基础制动装置的设计及制动距离的理论计算。
This article presented brake rigging device's design and theoretic calculation of brake distance of the first high speed power car in our country.
根据气体动力学原理，对纺粘法非织造工艺中负压拉伸的下吸风装置进行了理论研究，并通过计算风道流场中的各参数，改造下吸风装置。
The spunbond suction drawing system was studied according to the gas-dynamic theory, and it was modified by calculating various air current parameters of the drawing system.
最后，应用的理论主要是船舶动力装置常规设计理论，无法体现出计算机在现代设计领域中的优越性。
Finally, the theory used in the design of the shipping power installation is mainly conventional, which can not represent the priority of the computer in the recent design field.
本文应用几何规划理论和方法处理磁流体发电装置中燃烧产物组分的计算问题。
The principles and methods of geometric programming are adopted to deal with the calculation of compositions of combustion products in MHD system.
在实验装置上对气体引射器计算基本公式进行了实测验证，分析了理论特性曲线的可信度。
Experimental works for verifying the basic calculation equation of gas injector have been conducted on the lab-testing rig.
实验和理论模型的计算结果为半干法脱硫装置的设计提供了帮助。
The experimental and calculated results contributed to the design of a semi dry FGD system designed.
本文描述HL-1装置的水平杂散场及其动态优化补偿的实验研究和理论计算。
The horizontal stray field and its optimized dynamic compensation in the HL-1 tokamak have been studied both experimentally and theoretically.
通过对路面铣刨机铣削装置的工作方式、工作原理、刀具布置和铣削运动的理论分析，建立了刀具铣削受力计算的数学模型。
Based on the theoretical analysis of operating mode, operating principle, cutter arrangement, and milling motion of pavement miller, the mathematical model of cutting resistances has been established.
在经典内弹道理论基础上建立了火工分离装置的性能计算模型。
Setting up a performance modeling of the devices on the base of interior ballistics.
该法对试验项目中所施加的试验电流波形进行了频谱分析，为通过试验装置的计算机软件进行检定提供了理论基础。
The testing current waveshape have been spectrally analysed, thus providing the theoretic basis for the verification of these items by using software that works as a part of the testing devices.
从理论上计算分析出由于安装阻尼减振装置，在全机各典型部位的减振优化设计的效果。
Theoretically calculate and analyses the effect for dynamical optimize design of the type place of the aircraft due to setting damp reduce thingamy.
文中还给出了几种常用电磁装置在导电球体上电磁剖面异常理论曲线的计算公式。
The expressions for calculating the theoretical em profile anomalies of several commonly used em systems over a conducting sphere are also developed.
本文拟建立一套实验装置，测量双层生物组织模拟体中的光分布，并将实验结果与理论计算的结果进行了比较。
The paper will set up an experimental system, measure the light distribution in two layer tissue phantoms, and compare the experimental results with the Monte Carlo modeling.
阐述了塔式起重机附着装置的设计计算理论，建立了基于该理论的塔机附着装置计算机辅助设计系统。
It presents the designing principle of the attached member for tower crane, establishes the computer aided design system of this machinery.
对新型精轧机辊环锁紧装置进行了受力和变形分析，计算出它的拧紧力矩和相关性能指标，为正确使用提供了相关的理论依据。
The force and distortion of a new type locking rings unit were analyzed. The tightening torque and other performance figures were calculated, which provides theoretical basis for its proper usage.
应用该模型对一台中试装置进行了理论计算，计算结果与实验结果吻合较好。
The model and equations were applied in a established pyrolysis plant, and the resulting theoretical predictions were in satisfactory agreement with the experimental data.
基于带传动在稳定工作时的受力平衡，从理论上导出了摆架式自动张紧装置所产生的张紧力的计算公式。
Calculation formula of the tension caused by an automatic swaying belt tightener is derived theoretically according to the force balance of stable operation of belt driving.
对定性空间推理机械装置的配置给出了一个全新的途径，使得计算机能通过定性空间推理理论，初步判断人类对某个机械装置设计的概念思路是否合理。
A novel approach to qualitative spatial reasoning about the spatial configuration of mechanism is presented that could be applied to estimate if the mechanism design is reasonable in the early phases.
根据有限元和实验研究的结果，提出了3种转向装置的构造要点、设计理论和实用计算方法。
According to the results of FEA and experiments, structural kernels, design theory and practical calculating methods of the 3 types of deviators were proposed.
根据有限元和实验研究的结果，提出了3种转向装置的构造要点、设计理论和实用计算方法。
According to the results of FEA and experiments, structural kernels, design theory and practical calculating methods of the 3 types of deviators were proposed.
应用推荐