提出了一种通过计算机usb接口实现现场总线CAN与计算机(服务器)之间通信的方案。
In this paper, a kind of plan is proposed which use USB interface to realize computer (server) connect to Field bus CAN.
以工业以太网为基础，介绍了系统的硬件组成，设计了与生产控制计算机之间的数据通信接口。
Based on industry's Ethernet, the paper introduced the systematic hardware composition and designed the data communication interface between the system and the production control computer.
PCI是DSP应用系统与通用计算机高速通信的理想接口。
PCI is an ideal interface for high-speed communication between DSP application system and general computer.
通过软、硬件设计，利用该接口完成了单片机与计算机的数据通信。
The data communications between the single chip processor and the computer is implemented through the interface based on the hardware and software designs.
另一部分为接收器与计算机间的通信，将接收器接收到的信号在单片机的控制下通过RS232接口传递给PC机并让PC识别出相应的操作。
The other part is the communications between Receiver and computer. The receiver will transmit the signal which is received to PC under the control of MCU through the RS232 interface.
本文介绍了立体车库的PLC控制系统总体设计、控制程序设计、PLC与上位机接口的通信方案设计、计算机从PLC读取数据的程序设计等。
The main description is on designs such as overall scheme, control program, communication interface between PLC and upper computer, data read program.
网络接口单元（NIU）是控制计算机与通信网络进行交互的一种接口设备。
Network interface unit (NIU) is an interface device between the control computer and the communication network.
提出了一种使用U SB接口实现ISA总线与计算机通信的方案。
This paper proposes the realization methods of ISA to USB interface in computer communication.
利用USB接口技术，采用US B模块CH375，在加速器核辐射监测系统中实现了多个探测通道usb接口与计算机通信。
Making use of USB technology, adopting USB module CH375, realizing communication between USB interface of many detection channels and computer in accelerator nuclear radiation monitoring system.
通过对比USB与IEEE1394的优缺点，本课题选择了USB2.0协议作为嵌入式应用系统与计算机的通信接口方案。
Through balancing the excellences and disadvantages between USB and IEEE1394, we selected the USB2.0 interface to perform the communication between embedded system and computer.
它是一种可以同时处理计算机与具有USB接口的多种外设之间通信的电缆总线，USB已成为目前PC标准的通用串行总线。
It is a kind of cable bus which can process the communications between computer and peripheral equipments. USB is a general serial bus with PC standard.
服务器使用RS-485接口和计算机连接协议与PLC实时通信。
The server uses RS - 485 port and computer connection protocol to communicate with PLCs.
这些仪器通过专用通信接口和总线与计算机连接，可以实现控制功能。
By connecting these instruments with computers through specially designed communication interfaces and instrument buses, we can implement the functions of instrument control.
重点介绍了个人计算机与PLC连网通信的条件、个人计算机的异步通信适配器、以及运用高级语言编写个人计算机与PLC通信的接口程序原理。
The paper introduce the condition of communicating between person computer and PLC, the person computer asynchronism adapter and the high programming language communication interface principle of PLC.
主控计算机与各lcu中的监控单元和保护单元通过CAN总线通信，LCU中的PLC通过RS- 485接口与主控计算机通信。
Host computer communicates with the monitor unit and the protection unit of LCUs through the CAN bus. PLC in LCU communicates with host computer through the RS-485 port.
控制卡通过单片机对USB通信接口芯片的控制，实现PC计算机与控制卡通过USB接口的通信。
With the USB interface chip controlled by microcontroller, the communication between the card and PC is achieved.
本文提出了一种计算机与CAN通信的方法，使重新定义的计算机打印接口与具有CAN接口的适配卡相连。
This paper presented a method which realized the communication between PC printer adapter And CAN employing a module.
此外，还利用单片机的串行通信模块，设计了与计算机通信的串行接口，并给出了系统的硬件电路图和软件流程图。
In addition, the communication with MCU and computer is realized by the serial communication port. The system's hardware schematics and software flow chart are also discussed in this paper.
主要软件，控制和运行的计算机___的操作，并提供了基本的用户与计算机进行 通信的接口，通过它。
The main software that controls and runs the operation of the computer ___, and provides the basic interface through which the user communicates with the computer.
本课题主要做了以下工作：首先设计了一套DSP—VC5402开发系统，包括计算机串行通信、HPI口与计算机并行口通信的接口电路；
The main work of design are follows: first we designed DSP-VC5402 development system include the interface of communicating with PC series port and HPI port communicating with PC parallel port;
本课题主要做了以下工作：首先设计了一套DSP—VC5402开发系统，包括计算机串行通信、HPI口与计算机并行口通信的接口电路；
The main work of design are follows: first we designed DSP-VC5402 development system include the interface of communicating with PC series port and HPI port communicating with PC parallel port;
应用推荐