计算机仿真结果表明，该检测器的比特误码性能接近最佳检测器。
The computer simulation results show that the performance of the designed detector approaches that of the optimal multiuser detector and the computation complexity is reduced.
计算机仿真结果表明，当待测距离一定时，光强调制系数随着安装误差的增大而减小。
The computer simulation is performed, and the results show that when the distance on measure is certain, the coefficient of the intensity modulation will decrease with the fixing error increasing.
计算机仿真结果表明模糊控制系统在组织温度控制中比对应的线性PID控制系统鲁棒。
The computer simulation results indicate that the fuzzy PID control system is more robust than the comparable linear PID control system in control of the tissue temperature.
计算机仿真结果表明，该算法简单实用，控制效果较理想，适宜于采用计算机的过程控制系统。
The computer simulation result shows that this algorithm is simple and useful, and can be available for computer process control system to improve the control character.
计算机仿真结果表明，RS编码和交织技术非常适合空间光通信信道，能大大降低系统的误码率。
The results of simulation show that RS coding and interleaving are fit for the channel of space laser communication, and can largely decrease bit error rate(BER).
计算机仿真结果表明，改进的SITAN算法在理论上更加合理有效，定位精度更能够满足要求。
Simulation results show that modified SITAN algorithm is more reasonable and effective in theory than before one. Meanwhile, the positioning accuracy is greatly improved.
本文给出了一种宽带恒定束宽数字波束形成器的实现方案，计算机仿真结果表明了该方案的有效性。
Here a scheme to implement broad-band constant beamwidth digital beam-former has been presented. The results of computer simulation show the scheme is effective.
计算机仿真结果表明该算法的收敛性能优于粒子群优化算法，并且在非线性盲信号分离中是有效的。
The computer simulation results showed that the proposed algorithm was superior to original particle swarm optimization algorithms and was effective in separating nonlinear blind sources.
计算机仿真结果表明此方法可以运用到宽带信号处理中，计算量与传统的波束形成法相比大大减少。
Simulation results show that this method can be applied to wideband signal processing and its computational burden is much less than conventional beam-forming method.
计算机仿真结果表明，该方法能有效地进行涡结构识别，为基于涡结构的光学传输精确建模奠定了基础。
The computer simulation shows that the proposed method is valid using vortex structures recognition, and it provides basis for optical propagation model based on turbulence vortex structures.
数值计算和计算机仿真结果表明了高斯噪声、多用户干扰、多径衰落以及分集接收等对系统性能的影响。
Numerical and simulation results show that the Gaussian noises, multi user interferences, multipath fading and diversity receiving all have impact on the system performance.
理论分析和计算机仿真结果表明，这种新型的高频交流混合动力控制系统响应快，具有良好的动态性能。
Theory analysis and simulation results demonstrate that the proposed HFAC hybrid powers system has merits of fast system response, good dynamic performance.
计算机仿真结果表明，在调制带宽或扩频增益不变的前提下，提高了DSSS调制信号的低概率截获性能。
As a result, the computer simulations show that the LPI capability of the new DSSS modulation become more effective within the same bandwidth and Spread Spectrum gain.
计算机仿真结果表明，如果合理选择权重矩阵，最优洗出算法能够使飞行模拟器提供高逼真度的动感模拟。
Simulate tests show if weight matrix are rationally selected, the optimal washout algorithm can provide pilots with motion signal cuing of faithfulness of high degree.
计算机仿真结果表明，此方案不但使系统对参数的敏感性达到了非同步方式的水平，而且具有很好的相关性。
The experimental results show that, the scheme not only makes, the sensitivity to parameters of the system reach the level of asynchronous method, but also has good correlation property.
计算机仿真结果表明，该方法可以获得最优有效解，并且解的质量明显提高，对求解中大规模的TSP比较有效。
Computer simulations show that optimal solution can be obtained using this method and the tour quality is enhanced. This method is valid for solving medium or large scale TSP.
计算机仿真结果表明本文使用的等效斜视距离模型的误差较小，CA -ECS算法能有效地完成加速度运动补偿。
The computer simulation results illustrate that the squint range model has less error and CA-ECS algorithm can be used to accomplish motion compensation with acceleration efficiently.
计算机仿真结果表明，与现有算法相比，该算法用于天线方向图综合具有收敛速度快、优化能力强、算法可靠等优势。
Computer simulations show that the pattern synthesis of antenna arrays can be carried out with fast convergence and excellent stability by the model, even for complex cases.
计算机仿真结果表明，对于这一类复杂的柔性流程工业生产调度优化问题，本文提出的方法具有很好的实际应用前景。
Simulation results show that the algorithm illustrated in this paper has a prospective future in the applications to such complex optimization problems in process scheduling.
理论分析及计算机仿真结果表明，该算法在低信噪比条件下可实现DS/SS信号的盲同步及PN码序列的精确估计。
The problem above can be resolved by the blind synchronization algorithm. The theoretic analysis and experimental results show that the approach can work well on the lower S…
理论分析及计算机仿真结果表明，该算法在低信噪比条件下可实现DS/SS信号的盲同步及PN码序列的精确估计。
The problem above can be resolved by the blind synchronization algorithm. The theoretic analysis and experimental results show that the approach can work well on the lower S/N ratio input signals.
计算机仿真结果表明，这种方法可以有效地跟踪信号噪声特性的变化，且进一步完善了EP潜伏期变化的动态检测方法。
Computer simulation shows that this method can track the change of signal feature effectively, and it improves performances of the dynamic EP latency change detection methods.
计算机仿真结果表明，随着传感器数目的增加，在数量大于31后，车辙检测误差衰减缓慢，车辙的最大检测误差不超过2%。
Computer simulation result shows that when the number of sensors increase to 31, the rut error is reduced very slowly, the biggest error does not exceed 2%.
计算机仿真结果表明，该模型产生的混沌扩频序列调整更容易，比基于单一混沌映射能产生更多符合扩频通信要求的扩频序列。
Experimental results show that this scheme can generate much more spread-spectrum sequences than single chaotic map to satisfy the demand of spread-spectrum communication.
计算机仿真结果表明，利用该模型算法可以发现拓扑图中关键节点，同时度量值均方差可以准确评估给定连通网络拓扑图的抗毁性能。
The simulation on PC shows that the algorithm can find the critical nodes in topology, and the mean square deviation can evaluate accurately the survivability for a given connected topology.
通过计算机仿真结果表明，这种模糊增益调整PID控制器比常规pid控制器有更好的控制效果，大大改善了系统的动态和稳态性能。
Computer simulation results show that the fuzzy PID gain setting control method is superior to current PID control, and greatly improves the dynamic capability and stabilization capability.
计算机仿真结果表明该方法具有插补精度高，插补速度快的特点，完全满足CNC系统插补的实时性要求，极大地提高了摆线的加工效率。
The results show that the method has a high - speed and high - accuracy characteristic and satisfied the real time demand of the CNC system. The processing efficiency of cycloid is greatly improved.
计算机仿真结果表明，采用模糊变结构附加励磁控制方法可以提高鲁棒性、解决高频抖动问题，并能够很好地改善电力系统的小干扰稳定性。
Computer simulation shows that the control of fuzzy variable structure can increase the robustness, solve the problem of shiver at high frequency, and improve the stability of small disturbance.
计算机仿真结果表明，采用模糊变结构附加励磁控制方法可以提高鲁棒性、解决高频抖动问题，并能够很好地改善电力系统的小干扰稳定性。
Computer simulation shows that the control of fuzzy variable structure can increase the robustness, solve the problem of shiver at high frequency, and improve the stability of small disturbance.
应用推荐